Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The long term European materials R&D programme is mainly focused on the development of the following DEMO relevant materials: structural (RAFM steel called EUROFER), plasma facing (W alloy), breeder and neutron multiplier (Pb-17Li, Li4SiO4, Li2TiO3 and Be) ...
The behaviour of a pile subjected to thermo-mechanical loads was studied in situ with the aim of quantifying the thermal influence on the bearing capacity of heat exchanger piles. To accomplish this, a pile situated in a building under construction was equ ...
The photocatalyst for the use in the production of hydrogen from water or aqueous solutions of organic compounds by using light energy, comprises carbon, in addition to a semiconducting photocatalytic material. The photocatalytic apparatus for the producti ...
(The Hydrogen Solar Production Company Limited, UK).2002
During the up and down cycles of a fusion reactor, the first wall is exposed concomitantly to a flux of energetic neutrons that generates radiation defects and to a thermal flux that induces thermal stresses. The resulting strains may exceed the elastic li ...
The Buss-Kneader has proven to be a suitable reactor for the polymerization of acrylates. In this second part, the polymerization of methyl methacrylate and the ter- polymerization of methyl methacrylate (MMA), hydroxyethyl methacrylate and n-butylmethacry ...
The use of filamentous catalysts for innovative design of chemical reactors with structured catalytic beds is discussed in detail. The fluid dynamics attained in such reactors avoid transport limitations (mixing or heat- and mass-transfer) and increase rea ...
Neoclassical transport and a particle confinement are analysed for three 3-D reactor designs-the QAS3, the ST/sphellamak hybrid and the sphellamak-using the VENUS code. It is observed that neither the QAS3 nor the ST/sphellamak is truly aquasi-axisymmetric ...
Titanium dioxide (TiO2) is a widely investigated material for its biological compatibility, high dielectric constant and refractive index, chemical and mechanical resistance, and catalytic activity. Several different techniques are available to produce TiO ...
There is currently both considerable interest in the physics of ELM transport in the scrape-off layer (SOL) and concern over the impact of the ELM power and particle loads on the divertor targets of future fusion reactors. This paper describes some experim ...
A novel design of microstructured membrane reactor with micro-channels formed between closely packed catalytic filaments is reported. The system comprises filaments of 7 mm in diam. and has a laminar flow with a short radial diffusion time. This leads to l ...