Publications associées à Electroceramics

Ultrahigh Electrostrictive Effect in Lead-Free Ferroelectric Ceramics Via Texture Engineering

The electrostrictive effect, which induces strain in ferroelectric ceramics, offers distinct advantages over its piezoelectric counterpart for high-precision actuator applications, including anhysteretic behavior even at high frequencies, rapid reaction ti ...

Amer Chemical Soc2023

Field-induced ultrafast modulation of Rashba coupling at room temperature in ferroelectric alpha-GeTe(111)

Jan Hugo Dil

Rashba materials have appeared as an ideal playground for spin-to-charge conversion in prototype spintronics devices. Among them, alpha-GeTe(111) is a non-centrosymmetric ferroelectric semiconductor for which a strong spin-orbit interaction gives rise to g ...

Nature Portfolio2022

Sodium plating and stripping from Na-β"-alumina ceramics beyond 1000 mA/cm2

Sophia Haussener, Corsin Battaglia, Daniel Alexander Landmann

Dendrite formation limits the cycle life of lithium and sodium metal anodes and remainsa major challenge for their integration into next-generation batteries, even whenreplacing the liquid electrolyte by a solid electrolyte. Voids forming in solid metal an ...

2020

Effect of oxygen defects blocking barriers on gadolinium doped ceria (GDC) electro-chemo-mechanical properties

Paul Muralt, Robin Nigon, Ahsanul Kabir

Some oxygen defective metal oxides, such as cerium and bismuth oxides, have recently shown exceptional electrostrictive properties that are even superior to the best performing lead-based electrostrictors, e.g. lead-magnesium-niobates (PMN). Compared to pi ...

PERGAMON-ELSEVIER SCIENCE LTD2019

Nanoionics Phenomena and Devices with Oxide Thin Films

Mahmoud Hadad

The number of studies on solid state ionic thin films (Nanoionics) has increased dramatically over last decades due to their high potential in micro and nanoscale technologies. Micro solid oxide fuel cells (micro-SOFC), and resistive switching memories (Re ...

EPFL2017

Piezoelectric response of BiFeO3 ceramics at elevated temperatures

Dragan Damjanovic

The high Curie temperature (T-C similar to 825 degrees C) of BiFeO3 has made this material potentially attractive for the development of high-T-C piezoelectric ceramics. Despite significant advances in the search of new BiFeO3-based compositions, the piezo ...

AIP American Institute of Physics2016

Green piezoelectric for autonomous smart textile

Danick Briand, Etienne Pierre Lemaire, Christopher John Borsa

In this work, the fabrication of Rochelle salt based piezoelectric textiles are shown. Structures composed of fibers and Rochelle salt are easily produced using green processes. Both manufacturing and the material itself are really efficient in terms of en ...

Iop Publishing Ltd2015

Atomistic Modeling of Effect of Mg on Oxygen Vacancy Diffusion in alpha-Alumina

Paul Bowen, Ulrich Aschauer, Abhishek Tewari

Oxygen diffusion plays an important role in grain growth and densification during the sintering of alumina ceramics and governs high-temperature processes such as creep. The atomistic mechanism for oxygen diffusion in alumina is, however, still debated; at ...

Wiley-Blackwell2014

In situ TEM study of reduction and reoxidation of NiO/ceramic composites

Quentin Thomas Jeangros

Nickel/ceramic solid oxide fuel cell anodes exhibit a dimensional instability when experiencing a reduction-oxidation cycle. As fuel is supplied on the anode side, the as-sintered nickel oxide phase (NiO) reduces to metallic Ni and then remains in this sta ...

EPFL2014

High Piezoelectric Longitudinal Coefficients in Sol-gel PZT Thin Film Multilayers

Paul Muralt, Andrea Mazzalai, Antonia Neels, Silviu Cosmin Sandu, Nachiappan Chidambaram, Alex Dommann, Davide Balma

A five-layer stack of lead zirconate titanate (PZT) thin films with Pt electrodes was fabricated for potential applications in nanoactuator systems. The 1 mu m thick PZT films were deposited by a sol-gel technique, the platinum electrodes by sputtering. Th ...

Wiley-Blackwell2014