Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
A uniaxial compressive stress significantly modifies the dielectric and piezoelectric response of Pb(Zr,Ti)O3 (PZT)-based piezoceramics. In soft PZT, the pre-stress decreases both the piezoelectric coefficient and its increment with increasing dynamical st ...
Stress induced ferroelastic switching may represent an efficient toughening mechanism in piezoelectric-ferroelectric ceramics. During the crack propagation, the high tensional stresses at the crack tip can be partially released by the reorientation of 90 d ...
Ieee Service Center, 445 Hoes Lane, Po Box 1331, Piscataway, Nj 08855-1331 Usa2010
Defects play a critical role in the dynamic fragmentation process of structural ceramics. Cracks initiate at seemingly random locations, propagate and coalesce to form fragments. The process is accompanied by stress release waves, whose influence is diffic ...
The integration of ferroelectric polymer gates on a Mn-doped GaAs magnetic channel provides a promising route for the persistent field-effect control of magnetic properties in high-quality diluted magnetic semiconductors (DMSs) that are otherwise incompati ...
The crystal structure and property changes of sodium bismuth titanate (Na0.5Bi0.5TiO3, NBT) piezoelectric ceramics are reported as a function of La modification (0.5-2.0 at. %) and increasing temperature using high resolution x-ray diffraction, permittivit ...
Lead zirconate titanate (Pb(Zr1-xTix)O3 or PZT) ferroelectric ceramics have been widely used in transducers, actuators, and sensors, since they posses high dielectric and piezoelectric properties with a relatively high temperature of operation. Commerciall ...
The position of (Fe-Zr',(Ti)-V-O(center dot center dot))(center dot) defect complexes in Pb[Zr0.52Ti0.48]O-3 (PZT) piezoelectric ceramics was investigated by means of electron paramagnetic resonance (EPR) spectroscopy. The method of analysis pursued to obt ...
Ni-YSZ anode supports were used to fabricate test cells composed of yttria-stabilised zirconia (YSZ) electrolyte and lanthanum strontium ferrite (LSF) or lanthanum strontium manganite (LSM) / YSZ cathodes. These cells were operated at 720 °C at an average ...
Pure and barium titanate (BT) powders doped with different lanthanum concentration were prepared by the polymeric precursor method (Pechini process) which was carried out as a three-stage process from organometallic complexes. Sintering of pressed powders ...
Pb(Zr,Ti)O3 ceramics with homogenous, anisotropic porosity were manufactured and the influence of the anisotropic porosity on the dielectric and piezoelectric properties was studied. Image analysis allowed the quantification of the preferential orientation ...