Publications associées à Solution solide

Organic matters, but inorganic matters too: column examination of elevated mercury sorption on low organic matter aquifer material using concentrations and stable isotope ratios

Sorption of mercury (Hg) in soils is suggested to be predominantly associated with organic matter (OM). However, there is a growing collection of research that suggests that clay minerals and oxides are also important solid phases for the sorption of solu ...

2024

Enhanced Leaching of Zinc Ferrite by the Formation of a Solid Solution With Magnetite in Hydrochloric Acid Solution

The high zinc and iron contents of electric arc furnace (EAF) dust in the forms of zinc ferrite (ZnFe2O4) and magnetite (Fe3O4) make it a valuable secondary source of these metals. ZnFe2O4 and Fe3O4 are known to form a solid solution at all compositions, a ...

SPRINGER2023

Effect of Mo addition on the mechanical and tribological properties of magnetron sputtered TiN films

Sami Rtimi

Ternary-based titanium nitride (TiN) thin films have drawn attention toward rational applications due to their wear resistance, high hardness, and corrosion resistance. The influence of Mo content on the structural, tribo-logical, and mechanical properties ...

ELSEVIER SCIENCE SA2023

Insights on chemical and physical chloride binding in blended cement pastes

Karen Scrivener, Fabien Jacques Michel Georget, William Wilson, Julien Nicolas Gonthier

This study investigates chloride binding in blended cement pastes exposed to 0.5 M NaCl solutions (with and without pH adjustment) using X-ray diffraction and energy-dispersive X-ray spectroscopy image analysis (edxia). The aim is to better understand the ...

Pergamon-Elsevier Science Ltd2022

Micro-addition of Fe in highly alloyed Cu-Ti alloys to improve both formability and strength

Roland Logé, Cyril Cayron, Baptiste Thomas Jean Rouxel

Cu-Be alloys provide excellent electrical and mechanical properties, but present serious health hazards during manufacturing. Among alternative alloys, the Cu-Ti system has the highest yield strength; however, Ti cannot be easily solutionized at concentrat ...

ELSEVIER SCI LTD2022

Crossover between distinct symmetries in solid solutions of rare earth nickelates

Duncan Thomas Lindsay Alexander, Bernat Mundet, Jean-Marc Triscone

A strong coupling of the lattice to functional properties is observed in many transition metal oxide systems, such as the ABO(3) perovskites. In the quest for tailor-made materials, it is essential to be able to control the structural properties of the com ...

2021

A combined molecular dynamics and experimental study of two-step process enabling low-temperature formation of phase-pure α-FAPbI3

Michael Graetzel, Shaik Mohammed Zakeeruddin, Ursula Röthlisberger, Ulf Anders Hagfeldt, Paramvir Ahlawat, Essa Awadh R Alharbi, Haizhou Lu

It is well established that the lack of understanding the crystallization process in a two-step sequential deposition has a direct impact on efficiency, stability, and reproducibility of perovskite solar cells. Here, we try to understand the solid-solid ph ...

2021

Influence of pH on the chloride binding capacity of Limestone Calcined Clay Cements (LC3)

Karen Scrivener, François Henri Avet

The high solution to solid ratio normally used for the measurement of chloride binding isotherms, leads to a leaching of ions and a decrease of pH. To make binding test more representative of on-site conditions, we investigated the influence of the increas ...

Pergamon-Elsevier Science Ltd2020

Atomic Scale Investigations into the Origins of Ductility in Mg Alloys

Rasool Ahmad

The industrial applications of Mg, the lightest structural metal, and abundant in Earth's crust, are hampered by its low intrinsic ductility and low fracture toughness at room temperature which is attributed to the underlying less symmetric and plastically ...

EPFL2020

Analysis of double cross-slip of pyramidal I < c plus a > screw dislocations and implications for ductility in Mg alloys

William Curtin, Zhaoxuan Wu, Rasool Ahmad

Solute accelerated cross-slip of pyramidal < c + a > screw dislocations has recently been recognized as a crucial mechanism in enhancing the ductility of solid-solution Mg alloys. In pure Mg, cross-slip is ineffective owing to the energy difference between ...

PERGAMON-ELSEVIER SCIENCE LTD2020