Pierre-Etienne BourbanBackground 1990 Ingénieur en science des matériaux 1993 PhD in materials science Activities 1993-1994 Research at the Center for Composite Materials, University of Delaware, USA (ccm.udel.edu), SNSF grant Since 1994 Research and teaching at EPFL, Composites, (LTC, LPAC) 1995-1999 Coordination Swiss Priority Program on Materials research: 2.2: Composites Since 1998 Biocomposites 2004-2009 Direction of the EPFL Transdisciplinary programme in Sport and Rehabilitation 2005-2008 Member of the EPFL Vice-Presidency for Innovation and Valorisation and direction a.i.EPFL-LTC Since 2016 Direction Discovery Learning Labs Materials/Bioengineering and Engineering
John Christopher PlummerÉCOLE POLYTECHNIQUE FÉDÉRALE DE LAUSANNE (EPFL), Lausanne, Switzerland 1989-
Collaborateur Scientifique/Chargé de Cours (Lecturer) (1998-)
Privat Docent (1998)
Laboratoire de Technologie des Composites et Polymères (LTC) (2000-)
Laboratoire de Polymères (LP) (1998-2000)
UNIVERSITY OF MICHIGAN (UMICH), Ann Arbor, MI, USA 1995-1996
Visiting Scientist, Department of Materials Science and Engineering (DMSE)
UNIVERSITY OF CAMBRIDGE, Cambridge, UK 1986-1989
Research Assistant, Physics and Chemistry of Solids Group (PCS), Department of Physics
UNIVERSITY OF CAMBRIDGE, Cambridge, UK, Department of Materials 1986
PhD, "Flux Pinning in Type-II Superconductors"
UNIVERSITY OF CAMBRIDGE, Cambridge, UK, 1982
BA/MA Honours Degree in Natural Sciences
Awards
Prix R&R Haenny, 2007, DuPont Research Award, 2003, Commendation, British Polymer Group, Reading 1989
RECENT PUBLICATIONS
Ramier J, Da Costa N, Plummer CJG, Leterrier Y, Manson JAE, Eckert R, Gaudiana R, Cohesion and adhesion of nanoporous TiO2 coatings on titanium wires for photovoltaic applications, Thin solid films, 516, 1913 (2008).
Ramier J, Plummer CJG, Leterrier Y, Manson JAE, Eckert B, Gaudiana R, Mechanical integrity of dye-sensitized photovoltaic fibers, Renewable energy, 33, 314 (2008).
- Houphouet-Boigny C, Plummer CJG, Wakeman MD, Manson JAE, Hybrid glass fiber-reinforced thermoplastic nanocomposites, J. Thermoplast. Comp. Mater., 21, 103 (2008).
Ternat C, Ouali L, Sommer H, Fieber W, Velazco MI, Plummer CJG, Kreutzer G, Klok HA, Manson JAE, Herrmann, Investigation of the Release of Bioactive Volatiles from Amphiphilic Multiarm Star-Block Copolymers by Thermogravimetry and Dynamic Headspace Analysis, Macromolecules 41(19), 7079 (2008).
Ruggerone, R., Plummer, C.J.G., Negrete Herrera, N., Bourgeat-Lami, E., Månson, J-EA, Mechanical properties of highly filled latex-based polystyrene/laponite nanocomposites, Solid State Phenomena Vol. 151, 30 (2009).
Plummer, CJG, Dalle Vacche, S, Houphouët-Boigny, C, Michaud, V, Månson, JAE, Hybrid Glass Mat Reinforced Polypropylene-Montmorillonite Nanocomposites, Solid State Phenomena Vol. 151, 60 (2009).
Ruggerone, R., Plummer, C.J.G., Negrete Herrera, N., Bourgeat-Lami, E., Månson, J-EA, Highly filled polystyrenelaponite nanocomposites prepared by emulsion polymerization, European Polm. J. 45, 621 (2009).
Ruggerone, R., Plummer, C.J.G., Negrete Herrera, N., Bourgeat-Lami, E., Månson, J-EA, Fracture mechanisms in polystyrene/laponite nanocomposites prepared by emulsion polymerization, Engineering Fracture Mechanics 76, 2846 (2009)
Clausen P., Andreoni W., Curioni A., Hughs E., Plummer C.J.G. Adsorption of low-molecular-weight molecules on the surface of a sodium smectite clay: an ab initio study, Journal of Physical Chemistry C 113, 12293 (2009).
Clausen P., Andreoni W., Curioni A., Hughs E., Plummer C.J.G., Water adsorption on a sodium smectite clay surface: an ab initio study, Journal of Physical Chemistry C 113, 15218 (2009).
Molberg, M, Leterrier, Y., Plummer, C.J.G., Walder, C., Löwe, C., Opris, D.M., Nüesch, F.A., Bauer, S., Månson, J.-A.E., Frequency dependent dielectric and mechanical behaviour of elastomers for actuator applications, J. Appl. Phys. 106, 054112 (2009)
Clausen P., Signorelli M., Schreiber A., Hughes E., Plummer CJG, Fessas D., Schiraldi A., Månson E. J.-A., Equilibrium desorption isotherms of water, ethanol, ethyl acetate and toluene on a sodium smectite clay, Journal of Thermal Analysis and Calorimetry 98, 833 (2009)
Micusik, M., Bonnefond, A., Reyes, Y., Bogner, A., Chazeau, L., Plummer, C.J.G., Paulis, M., Leiza, J.R., Morphology of Polymer/Clay Latex Particles Synthesized by Miniemulsion Polymerization: Modeling and Experimental Results Macromol. React. Eng. 2010, 4, 432 (2010).
Houphouet-Boigny C., Plummer CJG, Vacche SD, Michaud V, Wakeman MD, Månson E. J.-A., Hybrid Glass Mat-reinforced Polypropylene-Montmorillonite Nanocomposites, J. Comp. Mater. 44, 1975 (2010).
Delabarde, C., Plummer C.J.G., Bourban, P.-E., Månson E. J.-A., Solidification behavior of PLLA/nHA nanocomposites, Comp. Sci. & Tech. 70, 1813 (2010).
Plummer C.J.G., Ruggerone R., Negrete-Herrera N., Bourgeat-Lami E., Månson J.-A.E., Small Strain Mechanical Properties of Latex-Based Nanocomposite Films, Macromol. Symp. 294, 1 (2010).
Dalle Vacche, S., Plummer C.J.G., Houphouet-Boigny C., Månson E. J.-A., Morphology and mechanical properties of isotactic polypropylene glass mat thermoplastic composites modified with organophilic montmorillonite, J Mater Sci 46, 2112 (2011). Véronique MichaudBackground: 1994 Habilitation à diriger des recherches ( INPG, France) 1991 PhD in Materials Engineering ( MIT, USA) 1987 Ingénieur Civil des Mines ( Ecole des Mines de Paris, France) Activités: Depuis Janvier 2018: Vice-Doyenne de la faculté des ingénieurs, en charge de l'éducation. Juin 2012-Dec.2017: Directrice de la Section Science et Génie des Matériaux Depuis Avril 2017, Professeur Associée EPFL 2009-2017 : Professeur Titulaire at EPFL 1997-2009 : collaboratrice Scientifique EPFL 1994-1997 : Chef de Travaux au laboratoire MSS-MAT, Ecole Centrale Paris (France) 1991-1994 : Post-doctoral research associate, MIT (USA) Environ 300 publications of which 140 in peer-reviewed journals
Dominique PiolettiDominique Pioletti received his Master in Physics from the Swiss Federal Institute of Technology Lausanne (EPFL) in 1992. He pursued his education in the same Institution and obtained his PhD in biomechanics in 1997. He developed original constitutive laws taking into account viscoelasticity in large deformations. Then he spent two years at UCSD as post-doc fellow acquiring know-how in cell and molecular biology. He was interested in particular to gene expression of bone cells in contact to orthopedic implant. In April 2006, Dominique Pioletti was appointed Assistant Professor tenure-track at the EPFL and is director of the Laboratory of Biomechanical Orthopedics. His research topics include biomechanics and tissue engineering of musculo-skeletal tissues; mechano-transduction in bone; development of orthopedic implant as drug delivery system. Since 2013, he has been promoted to the rank of Associate Professor.
Nico de RooijNico de Rooij is Professor Emeritus of EPFL and previous Vice-President of CSEM SA. He was Professor of Microengineering at EPFL and Head of the Sensors, Actuators and Microsystems Laboratory (
SAMLAB
) from 2009 to 2016. At
CSEM SA
he was responsible for the EPFL CSEM coordination from 2012 to 2016. His research activities include the design, micro fabrication and application of miniaturized silicon based sensors, actuators, and microsystems. He authored and coauthored over 400 published
journal papers
in these areas.
He was Professor at the University of Neuchatel and Head of the Sensors, Actuators and Microsystems Laboratory (SAMLAB) from 1982 to 2008. Since October 1990 till October 1996 and again from October 2002 until June 2008, he has been the director of the Institute of Microtechnology of the University of Neuchatel (IMT UniNE). He lectured at the Swiss Federal Institute of Technology, Zurich (ETHZ), and since 1989, he has been a part-time professor at the Swiss Federal Institute of Technology, Lausanne (EPFL). He has been appointed Vice-President of the CSEM SA in February 2008 and headed the newly created Microsystems Technology Division of CSEM SA, from 2008 until 2012. He was Director of EPFL's Institute of Microengineering (EPFL STI IMT) from 2009 to 2012, following the transfer of IMT Uni-NE to EPFL.
Dr. de Rooij is a Fellow of the IEEE and Fellow of the Institute of Physics (UK). He recieved the IEEE
Jun-Ichi Nishizawa Gold Medal
, the Schlumberger Prize as well as the
MNE Fellow Award 2016
. He was awarded a Visiting Investigatorship Program (VIP) in MEMS/NEMS Systems by the
A*STAR Science and Engineering Council (SERC)
, Singapore, hosted by
SIMTech
, for the period 2005-2008.
Prof. de Rooij is Corresponding Member of the
Royal Netherlands Academy of Arts and Sciences
and Individual Member of the
Swiss Academy of Engineering Sciences
.
He has been serving on the Editorial Boards of the
IEEE/ASME Journal of Microelectromechanical Systems (IEEE JMEMS)
,
the IEEE proceedings
,
the Journal of Micromechanics and Microengineering, JM & M,
,
the Sensors and Actuators
,and
Sensors and Materials
. He was Member of the Information and Communication technology jury of the BBVA Foundation Frontiers of Knowledge Awards from 2009 to 2012.
Dr. de Rooij is (or was) Member of numerous international steering committees of conference series as well as
technical paper review panels including the steering committee of the International Conference on Solid-State
Sensors and Actuators and of Eurosensors. He acted as European Program Chairman of Transducers '87 and General Chairman of Transducers '89, Montreux, Switzerland.
He has supervised more than 70 Ph.D. students, who have successfully completed their
Ph.D. thesis.
He received his M.Sc. degree in physical chemistry from the State University of Utrecht, The Netherlands, in 1975, and a Ph.D. degree from Twente University of Technology, The Netherlands, in 1978. From 1978 to 1982, he worked at the Research and Development Department of Cordis Europa N.V., The Netherlands.
Yves LeterrierYves Leterrier joined EPFL in 1993 and is a faculty member of the Materials Institute. He is a senior scientist and lecturer in the Laboratory for Processing of Advanced Composites (LPAC, previously Laboratory of Composite and Polymer Technology, LTC). Activities
2000-2005: Foundation and Chair of the Korea-Switzerland joint symposia on materials and micro-technologies2004-2008: Board member of FLEXIDIS (the European flexible display consortium) 2004-2009: Group leader on lightweight materials for Solar ImpulseSince 2008: Board member of the French Adhesion SocietySince 2000: President of the EPFL Materials Science Library commissionSince 2012: Editorial board member, Applied Surface ScienceSince 2014: Associate Editor, Frontiers in MaterialsSince 2021: Coordinator of the EPFL Minor on 'Engineering for Sustainability'
Background
1987: MS in materials science and solid state physics (INPL, France) 1991: PhD in materials science (Ecole des Mines, INPL, France) 1992: Research Associate, National Institute of Standards and Technology (NIST, USA)
Martyn Douglas WakemanDr. Martyn Wakeman is a seasoned professional in advanced composites with a proven record of 20 yrs, spanning academia and global corporations. He has worked in M&A deep dive projects in the Advanced Composites Space and has a proven publication (80 ) and patent (30) history in the development of continuous fibre thermoplastic composites from formulation, processing, to applications. He is currently attached at 50% to the Laboratory for Processing of Advanced Composites at the EPFL focused on 3D printing and advanced composites and also available as an independent consultant.
Prior to this role he worked at DuPont from 2007-2016 in Geneva, Switzerland where he worked to drive the development strategy and led research of the DuPont Vizilon thermoplastic composites offer including continuous carbon and glass reinforced composites. From 1997 to 2007 he was a Scientific Collaborator at the Swiss Federal Institute of Technology, EPFL, in which he was Head of the Composite and Polymer Laboratory's "Industrial implementation group", located in the EPFL science park, focused on the automotive industry both in Europe and North America. He has a PhD in mechanical engineering focused on composites.
Hans Peter HerzigDr. Hans Peter Herzig is Professor at the Ecole Polytechnique Fédérale de Lausanne (EPFL) and Past President of the European Optical Society (EOS). His current research interests include refractive and diffractive micro-optics, nano-scale optics and optical MEMS.
Hans Peter Herzig received his diploma in physics from the Swiss Federal Institute of Technology in Zürich, Switzerland, in 1978. From 1978 to 1982 he was a scientist with the Optics Development Department of Kern in Aarau, Switzerland, working in lens design and optical testing. In 1983, he became a graduate research assistant with the Applied Optics Group at the Institute of Microtechnology of the University of Neuchâtel, Switzerland, working in the field of holographic optical elements. In 1987, he received his PhD degree in optics. From 1989 to 2001 he was head of the micro-optics research group in Neuchâtel. From 2002 to 2008 he was a full professor and head of the Applied Optics Laboratory at the University of Neuchâtel. Professor Herzig joined the faculty at EPFL in January 2009.
He is member of OSA, IEEE Photonics Society and Fellow of EOS. 2009-2010 he was President of the European Optical Society (EOS), 2001-2009 Vice-President of the Swiss Society of Optics and Microscopy and 2012-2014 Vice-President of ICO. Dr. Herzig is in the editorial board of different scientific journals (JM3, Optical Review, JEOS). He served as Conference Chairman for international conferences of EOS, IEE, IEEE/LEOS, OSA and SPIE; and as Guest Editor of three special issues of IEEE, OSA journals. He is editor of a well-known book on micro-optics (published in English and Chinese), author of 14 book chapters, over 150 peer reviewed articles and 300 conference proceedings.
