Concept

Polymère renforcé de fibres de carbone

Publications associées (903)

Flat prestressed unbonded retrofit system for strengthening of existing metallic I-Girders

Alain Nussbaumer, Ardalan Hosseini, Masoud Motavalli, Elyas Ghafoori

In this study, a novel retrofitting system is developed to strengthen existing metallic I-girders using prestressed unbonded carbon fiber reinforced polymer (CFRP) plates. The system relies on a pair of mechanical clamps. Each clamp holds two CFRP plates ( ...

2018

Novel experimental design for two-dimensional delamination in FRP laminates

Thomas Keller, Anastasios Vassilopoulos, Aida Cameselle Molares

Abstract: The two-dimensional (2D) delamination behavior of composite laminates under quasi-static out-of-plane opening loads has been experimentally investigated. A novel design and experimental set-up for fiber-reinforced polymer (FRP) laminated plates w ...

2018

Modeling The Hyperloop With COMSOL Multiphysics® : On The Design Of The EPFLoop Pressurized Systems

Nicolo' Riva, Lorenzo Benedetti

The EPFLoop team from Ecole Polytechnique Fédérale de Lausanne has developed a capsule thanks to which it won the 3rd place in SpaceX's Hyperloop Pod Competition in 2018. COMSOL Multiphysics was used to analyze and study the pressurized systems of the pod. ...

2018

Shape memory alloy (SMA) strips for fatigue strengthening of cracked steel plates

Ardalan Hosseini, Elyas Ghafoori

This paper aims to show the feasibility of application of iron-based shape memory alloy (Fe-SMA) for fatigue strengthening of steel plates. The effectiveness of the proposed retrofit system was also compared with that of prestressed carbon-fiber reinforced ...

2018

Finite element analysis of initial imperfection effects on kinking failure of unidirectional glass fiber-reinforced polymer composites

Thomas Keller, Anastasios Vassilopoulos, Wei Sun

The compressive kinking behavior of non-slender unidirectional glass fiber-reinforced polymer (GFRP) specimens has been analyzed by finite element (FE) models. The experimentally observed imperfections, including the initial fiber waviness throughout the e ...

ELSEVIER SCI LTD2018

Strategies for faster impregnation in melt thermoplastic resin transfer molding process

Damiano Salvatori

Continuous fiber thermoplastic composites are potential substitutes of steel in structural automotive components, since they combine fiber strength and rigidity with ductility, potential recyclability and low density of the thermoplastic (TP) matrix. Resin ...

EPFL2018

Simulating Local Buckling-Induced Softening in Steel Members Using an Equivalent Nonlocal Material Model in Displacement-Based Fiber Elements

Dimitrios Lignos

Fiber-based elements are commonly used to simulate steel beam-columns because of their ability to capture P-M interactions and spread of plasticity. However, when mechanisms such as local buckling result in effective softening at the fiber scale, conventio ...

2018

Progress in Self-Healing Fiber-Reinforced Polymer Composites

Véronique Michaud, Amaël Maximilien Cohades

This paper sets out to review the current state of the art in applying self-healing/self-repair to high-performing advanced fiber-reinforced polymer composite materials (FRPs). A significant proportion of self-healing studies have focused so far on develop ...

WILEY2018

Next generation UHPFRC for sustainable structural applications

Emmanuel Denarié, Amir Hajiesmaeili

Over the last few decades, ever-increasing demands of society to the built environment have continually increased consumption of energy and materials for the construction and maintenance of structures. Meanwhile, Strain Hardening Ultra High-Performance Fib ...

2018

Flat prestressed unbonded reinforcement (FPUR) system for strengthening of steel I-Beams

Alain Nussbaumer, Ardalan Hosseini, Masoud Motavalli, Elyas Ghafoori

This paper proposes a novel retrofitting system for the strengthening of steel I-beams using prestressed unbonded carbon fiber reinforced polymer (CFRP) plates. The system relies on a pair of mechanical clamps. Each clamp holds two flat CFRP plates (each 5 ...

Taylor & Francis2018

Graph Chatbot

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.

Connectez-vous pour utiliser Chat avec Graph Search