Êtes-vous un étudiant de l'EPFL à la recherche d'un projet de semestre?
Travaillez avec nous sur des projets en science des données et en visualisation, et déployez votre projet sous forme d'application sur GraphSearch.
Concept
Coaxial loudspeaker
Résumé
A coaxial loudspeaker is a loudspeaker system in which the individual driver units radiate sound from the same point or axis. Two general types exist: one is a compact design using two or three speaker drivers, usually in car audio, and the other is a two-way high-power design for professional audio, also known as single-source or dual-concentric loudspeakers. The design is favored for its compactness and behavior as an audio point source.
Coaxial loudspeakers in professional audio enable sound from two drivers to come from one source. This characteristic allows a wider field of listening to a synchronized summation of speaker drivers than loudspeaker enclosures containing physically separated drivers. As well, the pattern of response is symmetric around the axis of the loudspeaker.
Since the 1943 introduction of the Altec Lansing Duplex 601 coaxial driver, recording studio monitors have often been coaxial loudspeaker designs. In 1945 the improved Altec 604 was introduced, and it soon became the recording industry standard studio monitor in the U.S. First shown in 1947 in England, the Tannoy Dual Concentric design assumed the same role across Europe from the 1950s onward. The Altec 604 combined a woofer with a compression driver attached to a horn to carry the high frequencies. The Tannoy also used a 15-inch woofer and a compression driver for high frequencies, but differed in that the woofer itself served as the final horn flare for the high frequency driver. Thus, its output pattern was radially symmetric, not just mirror-image symmetric as in the Altec. Both designs placed the high frequency driver behind the low frequency driver, and both were not initially time aligned. The high frequencies arrived at the listener's ear slightly later than the low frequencies.
One drawback of the design is the production line difficulty in mating the two drivers, and in replacing or reconing the woofer. Another drawback is that the low frequencies tend to modulate the high frequencies, causing greater intermodulation distortion.
Source officielle
À propos de ce résultat
Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.