Personnes associées (55)
Jean-François Molinari
Professor J.F. Molinari is the director of the Computational Solid Mechanics Laboratory (http://lsms.epfl.ch) at EPFL, Switzerland. He holds an appointment in the Civil Engineering institute, which he directed from 2013 to 2017, and a joint appointment in the Materials Science institute. He started his tenure at EPFL in 2007, and was promoted to Full Professor in 2012. He is currently an elected member of the Research Council of the Swiss National Science Foundation in Division 2 (Mathematics, Natural and Engineering Sciences), and co editor in chief of the journal Mechanics of Materials. J.F. Molinari graduated from Caltech, USA, in 2001, with a M.S. and Ph.D. in Aeronautics. He held professorships in several countries besides Switzerland, including the United States with a position in Mechanical Engineering at the Johns Hopkins University (2000-2006), and France at Ecole Normale Supérieure Cachan in Mechanics (2005-2007), as well as a Teaching Associate position at the Ecole Polytechnique de Paris (2006-2009).  The work conducted by Prof. Molinari and his collaborators takes place at the frontier between traditional disciplines and covers several length scales from atomistic to macroscopic scales. Over the years, Professor Molinari and his group have been developing novel multiscale approaches for a seamless coupling across scales. The activities of the laboratory span the domains of damage mechanics of materials and structures, nano- and microstructural mechanical properties, and tribology.
Florian Frédéric Vincent Breider
Florian Breider obtained his PhD in the field of the stable isotope biogeochemistry from the University of Neuchatel in 2013. This was followed by seven months of postdoc at EPFL in the Atmospheric Particles Research Laboratory and two years as research associate at Tokyo Institute of Technology (Japan) where he conducted studies on nitrous oxide biogeochemistry in oceans. From 2015 to 2018, he was research scientist in the Laboratory for Water Quality and Treatment at EPFL where he conducted research on disinfection by-products and antibiotic resistant bacteria.  Since May 2018, he is director of the Central Environmental Laboratory at the Institute of Environmental Engineering of EPFL.
Véronique Michaud
Background: 1994 Habilitation à diriger des recherches ( INPG, France) 1991 PhD in Materials Engineering ( MIT, USA) 1987 Ingénieur Civil des Mines ( Ecole des Mines de Paris, France)  Activités: Depuis Janvier 2018: Vice-Doyenne de la faculté des ingénieurs, en charge de l'éducation. Juin 2012-Dec.2017: Directrice de la Section Science et Génie des Matériaux Depuis Avril 2017, Professeur Associée EPFL 2009-2017 : Professeur Titulaire at EPFL 1997-2009 : collaboratrice Scientifique EPFL 1994-1997 : Chef de Travaux au laboratoire MSS-MAT, Ecole Centrale Paris (France) 1991-1994 : Post-doctoral research associate, MIT (USA) Environ 300 publications of which 140 in peer-reviewed journals
John Christopher Plummer
ÉCOLE POLYTECHNIQUE FÉDÉRALE DE LAUSANNE (EPFL), Lausanne, Switzerland 1989- Collaborateur Scientifique/Chargé de Cours (Lecturer) (1998-) Privat Docent (1998) Laboratoire de Technologie des Composites et Polymères (LTC) (2000-) Laboratoire de Polymères (LP) (1998-2000) UNIVERSITY OF MICHIGAN (UMICH), Ann Arbor, MI, USA 1995-1996 Visiting Scientist, Department of Materials Science and Engineering (DMSE) UNIVERSITY OF CAMBRIDGE, Cambridge, UK 1986-1989 Research Assistant, Physics and Chemistry of Solids Group (PCS), Department of Physics UNIVERSITY OF CAMBRIDGE, Cambridge, UK, Department of Materials 1986 PhD, "Flux Pinning in Type-II Superconductors" UNIVERSITY OF CAMBRIDGE, Cambridge, UK, 1982 BA/MA Honours Degree in Natural Sciences Awards Prix R&R Haenny, 2007, DuPont Research Award, 2003, Commendation, British Polymer Group, Reading 1989 RECENT PUBLICATIONS Ramier J, Da Costa N, Plummer CJG, Leterrier Y, Manson JAE, Eckert R, Gaudiana R, “Cohesion and adhesion of nanoporous TiO2 coatings on titanium wires for photovoltaic applications”, Thin solid films, 516, 1913 (2008). Ramier J, Plummer CJG, Leterrier Y, Manson JAE, Eckert B, Gaudiana R, “Mechanical integrity of dye-sensitized photovoltaic fibers”, Renewable energy, 33, 314 (2008).
  1. Houphouet-Boigny C, Plummer CJG, Wakeman MD, Manson JAE, “Hybrid glass fiber-reinforced thermoplastic nanocomposites”, J. Thermoplast. Comp. Mater., 21, 103 (2008).
Ternat C, Ouali L, Sommer H, Fieber W, Velazco MI, Plummer CJG, Kreutzer G, Klok HA, Manson JAE, Herrmann, “Investigation of the Release of Bioactive Volatiles from Amphiphilic Multiarm Star-Block Copolymers by Thermogravimetry and Dynamic Headspace Analysis”, Macromolecules 41(19), 7079 (2008). Ruggerone, R., Plummer, C.J.G., Negrete Herrera, N., Bourgeat-Lami, E., Månson, J-EA, “Mechanical properties of highly filled latex-based polystyrene/laponite nanocomposites”, Solid State Phenomena Vol. 151, 30 (2009). Plummer, CJG, Dalle Vacche, S, Houphouët-Boigny, C, Michaud, V, Månson, JAE, “Hybrid Glass Mat Reinforced Polypropylene-Montmorillonite Nanocomposites”, Solid State Phenomena Vol. 151, 60 (2009). Ruggerone, R., Plummer, C.J.G., Negrete Herrera, N., Bourgeat-Lami, E., Månson, J-EA, “Highly filled polystyrene–laponite nanocomposites prepared by emulsion polymerization”, European Polm. J. 45, 621 (2009). Ruggerone, R., Plummer, C.J.G., Negrete Herrera, N., Bourgeat-Lami, E., Månson, J-EA, “Fracture mechanisms in polystyrene/laponite nanocomposites prepared by emulsion polymerization”, Engineering Fracture Mechanics 76, 2846 (2009) Clausen P., Andreoni W., Curioni A., Hughs E., Plummer C.J.G. “Adsorption of low-molecular-weight molecules on the surface of a sodium smectite clay: an ab initio study”, Journal of Physical Chemistry C 113, 12293 (2009). Clausen P., Andreoni W., Curioni A., Hughs E., Plummer C.J.G., “Water adsorption on a sodium smectite clay surface: an ab initio study”, Journal of Physical Chemistry C 113, 15218 (2009). Molberg, M, Leterrier, Y., Plummer, C.J.G., Walder, C., Löwe, C., Opris, D.M., Nüesch, F.A., Bauer, S., Månson, J.-A.E., “Frequency dependent dielectric and mechanical behaviour of elastomers for actuator applications”, J. Appl. Phys. 106, 054112 (2009) Clausen P., Signorelli M., Schreiber A., Hughes E., Plummer CJG, Fessas D., Schiraldi A., Månson E. J.-A., “Equilibrium desorption isotherms of water, ethanol, ethyl acetate and toluene on a sodium smectite clay”, Journal of Thermal Analysis and Calorimetry 98, 833 (2009) Micusik, M., Bonnefond, A., Reyes, Y., Bogner, A., Chazeau, L., Plummer, C.J.G., Paulis, M., Leiza, J.R., “Morphology of Polymer/Clay Latex Particles Synthesized by Miniemulsion Polymerization: Modeling and Experimental Results” Macromol. React. Eng. 2010, 4, 432 (2010). Houphouet-Boigny C., Plummer CJG, Vacche SD, Michaud V, Wakeman MD, Månson E. J.-A., “Hybrid Glass Mat-reinforced Polypropylene-Montmorillonite Nanocomposites”, J. Comp. Mater. 44, 1975 (2010). Delabarde, C., Plummer C.J.G., Bourban, P.-E., Månson E. J.-A., “Solidification behavior of PLLA/nHA nanocomposites”, Comp. Sci. & Tech. 70, 1813 (2010). Plummer C.J.G., Ruggerone R., Negrete-Herrera N., Bourgeat-Lami E., Månson J.-A.E., “Small Strain Mechanical Properties of Latex-Based Nanocomposite Films”, Macromol. Symp. 294, 1 (2010). Dalle Vacche, S., Plummer C.J.G., Houphouet-Boigny C., Månson E. J.-A., “Morphology and mechanical properties of isotactic polypropylene glass mat thermoplastic composites modified with organophilic montmorillonite”, J Mater Sci 46, 2112 (2011).
Thomas Keller
EDUCATION 1992 Dr. sc. techn. (PhD) Swiss Federal Institute of Technology, Zurich (ETH) 1983 Dipl. Bauing. ETH (MS civil engineering) Swiss Federal Institute of Technology, Zurich (ETH) EMPLOYMENT 2007-present, Full Professor of Structural Engineering (100%) Swiss Federal Institute of Technology, Lausanne (EPFL) Civil Engineering Institute 1998-2007, Associate Professor of Structural Engineering (80/100%) Swiss Federal Institute of Technology, Lausanne (EPFL) Structural Engineering Institute Foundation of CCLab in 2000 1996-1998, Assistant Professor of Structural Engineering (50%) Swiss Federal Institute of Technology, Zurich (ETH) Department of Architecture 1992-2004, Senior Project Engineer and Joint Owner Engineering offices in Zug and Zurich 1990-1992, Research Scientist Swiss Federal Institute of Technology, Zurich (ETH) Structural Engineering Institute 1986-1990, Project Engineer Architecture and engineering office Calatrava, Zurich 1983-1986, Teaching and Research Assistant Swiss Federal Institute of Technology, Zurich (ETH) Structural Engineering Institute
Lyesse Laloui
Director, EPFL Soil Mechanics LaboratoryDirector, EPFL Civil Engineering SectionEditor in Chief, ElsevierMember of the Swiss Academy of Engineering SciencesFounding Partner, Geoeg & MeduSoilActive in academic research in the following institutions: Lausanne, EPFL, Durham, Duke University, Nanjing, Hohai UniversityProfessor Lyesse Laloui teaches at EPFL, where he directs the Soil Mechanics Laboratory as well as the Civil Engineering Section. He is a founding partner of the international engineering company Geoeg, and the start-up MeduSoil. In addition, he is an adjunct professor at Duke University, USA and an advisory professor at Hohai University, China as well as honorary director of the International Joint Research Center for Energy Geotechnics in China.He is the recipient of an Advance ERC grant for his BIO-mediated GEO-material Strengthening project. Editor in Chief of the Elsevier Geomechanics for Energy and the Environment journal, he is a leading scientist in the field of geomechanics and geo-energy. He has written and edited 13 books and published over 320 peer reviewed papers; his work is cited more than 6000 times with an h-index of 39 (Scopus). Two of his papers are among the top 1% in the academic field of Engineering. He has given keynote and invited lectures at more than 40 leading international conferences. He has received several international awards (IACMAG, RM Quigley, Roberval) and delivered honorary lectures (Vardoulakis, Minnesota; G.A. Leonards, Purdue; Kersten, Minnesota). He recently acted as the Chair of the international evaluation panel of Civil and Geological Engineering R&D Units of Portugal.Nov. 2019 For further information visit www.epfl.ch/labs/lms/ ;  geoeg.net ; medusoil.com
Aurelio Muttoni
Aurelio Muttoni est professeur ordinaire et directeur du Laboratoire de Construction en Béton de l’Ecole Polytechnique Fédérale de Lausanne (Suisse). Il a reçu son diplôme et son doctorat en génie civil de l’Ecole Polytechnique Fédérale de Zürich à Zürich, Suisse, en 1982 et 1989 respectivement. Ses activités actuelles en matière d’enseignement se concentrent sur la conception des structures, la théorie et le dimensionnement des structures en béton ainsi que la conception des ponts. Son groupe de recherche est actif dans les domaines suivants : comportement et méthodes de dimensionnement des structures en béton, conception de structures innovantes, effort tranchant dans les structures en béton, poinçonnement des dalles, analyse non-linéaire des structures incluant leur fiabilité, adhérence entre l’acier et le béton, engrènement des granulats, fatigue et influence de la durée de chargement sur la résistance du béton, comportement mécanique et principes de dimensionnement pour le béton à ultra-hautes performances, béton textile et béton recyclé. Aurelio Muttoni a reçu la distinction Chester Paul Siess Award for Excellence in Structural Research en 2010 et la médaille Wason for Most Meritorious Paper en 2014, toutes deux décernées par l’ American Concrete Institute . Il est membre du Presidium de la fib (Fédération Internationale du Béton), de plusieurs commissions et groupes de travail de la fib et il a dirigé le Project Team pour la deuxième génération de la norme européenne EN 1992-1-1 (Eurocode pour les structures en béton). Aurelio Muttoni est aussi co-fondateur et associé du bureau de conseil Muttoni & Fernández (www.mfic.ch). Ce bureau est actif dans la conception, l’analyse et le dimensionnement de structures porteuses pour les constructions d’architecture et de génie civil, ainsi que dans le conseil en matière d’ingénierie structurale.
Philippe Spätig
Philippe Spätig is currently Adjunct Professor at EPFL in the School of Basic Sciences, in the Laboratory of Reactor Physics and Systems Behaviours. He obtained his diploma of Engineer Physicist at EPFL in 1991 and his PhD at EPFL in 1995 on the role of thermal activation in the plasticity of the intermetallic Ni3Al. From 1995 to 1997, he worked as postdoc in the Materials Group of the Center for Research in Plasma Physics at EPFL, studying the effects of high-energy proton irradiation on alloys and pure metals. He then moved to the University of California Santa Barbara and spent two years in the group of Professor G.R. Odette, working on fracture mechanics of ferritic structural steels. He joined again the Materials Group of the Center for Research in Plasma Physics at EPFL in 2000 and worked in this group until the end of 2012. His research was focused on irradiation hardening and embrittlement of steels, as well as on the development of oxide dispersion strengthened steels. He also worked and developed experimental and analytical small specimen test techniques to reliably extract mechanical properties from limited material volume. In 2013, he joined the Laboratory for Nuclear Materials at Paul Scherrer Institute, while being associated with the Laboratory for Reactor Physics and System Behaviours at EPFL. Since then he mainly works on environmentally-assisted fatigue and fracture on austenitic and pressure vessel steels, where the effects of light water reactor environment on mechanical properties are investigated.

Graph Chatbot

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.