Publications associées à Pyrolyse

Influence of Si3N4 fillers and pyrolysis profile on the microstructure of additively manufactured silicon carbonitride ceramics derived from polyvinylsilazane

In this work, various methods were used to improve the printability of a photocurable polyvinylsilazane resin filled with silicon nitride particles for digital light processing. The developed resin was used as a preceramic polymer for polymer-to-ceramic co ...

Taylor & Francis Ltd2024

Mechanistic study on the evolution of vacancies in graphene by oxidation by scanning tunneling microscopy

Shaoxian Li

Nanostructured graphitic materials, including graphene hosting Å to nanometer-sized pores, have attracted attention for various applications such as separations, sensors, and energy storage. Graphene with Å-scale pores is a promising next-generation materi ...

EPFL2023

Additive manufacturing of ceramics by two-photon lithography, volumetric 3D printing and high-resolution endo-printing

Georgia Konstantinou

Additive manufacturing is a growing sector of industrial production that allows the fabrication of parts with complex geometries and reduced waste. The context of this thesis is light-based additive manufacturing technologies. In the first part of the the ...

EPFL2022

Thermodynamic modelling of hydrogen production in sorbent-enhanced biochar-direct chemical looping process

Hydrogen (H-2) has been widely considered the clean energy carrier of choice for emerging renewable energy generation technologies. However, H-2 is a secondary fuel mainly derived from natural gas. Over the past decades, research on developing H-2 producti ...

2022

Multiscale microshaping of functionally graded polymer-derived SiCN ceramics

Lorenz Hagelüken

Polymer-derived ceramics (PDCs) exhibit excellent properties and are compatible with many shaping techniques due to the liquid character of the preceramic polymers (PCPs). Furthermore, their properties are adjustable by modifying the precursor composition ...

EPFL2022

Hybridization of Synthetic Humins with a Metal-Organic Framework for Precious Metal Recovery and Reuse

Wendy Lee Queen, Jordi Espin Marti, Till Marian Schertenleib, Olga Trukhina, Claudia Esther Avalos, Vikram Vinayak Karve

The number of synthetic strategies used to functionalize MOFs with polymers is rapidly growing; this stems from the knowledge that non-native polymeric guests can significantly boost MOF performance in a number of desirable applications. The current work p ...

AMER CHEMICAL SOC2021

Optimization of a Py-GC/MS method for silicone -based lubricants analysis

Christophe Roussel, Céline Burnier

Condom evidence can be analysed using several analytical techniques, such as FTIR, MALDI-MS or DART-TOF-MS, but the only one that was used on real samples for transfer and persistence studies in the context of sexual assault or rape cases was Py-GC/MS. How ...

2020

Optimization of Lignin Extraction from Pine Wood for Fast Pyrolysis by Using γ-valerolactone-Based Binary Solvent System

Jeremy Luterbacher, Allen Puente-Urbina

Fast pyrolysis of lignin is a promising method to produce aromatic chemicals and fuels. Lignin structure and pyrolysis conditions determine the liquid yield and product selectivity. Extraction of pine wood using γ-valerolactone (GVL) mixed with water in th ...

2019

Steam Gasification of Carbonaceous Feedstocks via a 1.5 kWth Hybrid Solar/Autothermal Reactor

Sophia Haussener, Iacopo Guscetti

A continuous method of steam gasification through hybridization of a solar reactor with an autothermal gasification process is proposed and tested. The ability to autothermally gasify a carbonaceous feedstock within a solar reactor enables round-the-clock ...

AMER INST PHYSICS2019

Topology of Pretreated Wood Fibers Using Dynamic Nuclear Polarization

David Lyndon Emsley, Jeremy Luterbacher, Arthur César Pinon, Pierrick Berruyer, Jasmine Viger-Gravel, Wu Lan, Michel Bardet

In the continuously developing field of lignocellulosic biomass, high-yield lignin depolymerization processes are sought to optimize its productivity and profitability. Recently, formaldehyde stabilization during lignin extraction and biomass pretreatment ...

2019