A dual-clutch transmission (DCT) (sometimes referred to as a twin-clutch transmission) is a type of multi-speed vehicle transmission system, that uses two separate clutches for odd and even gear sets. The design is often similar to two separate manual transmissions with their respective clutches contained within one housing, and working as one unit. In car and truck applications, the DCT functions as an automatic transmission, requiring no driver input to change gears.
The first DCT to reach production was the Easidrive automatic transmission introduced on the 1961 Hillman Minx mid-size car. This was followed by various eastern European tractors through the 1970s (using manual operation via a single clutch pedal), then the Porsche 962 C racing car in 1985. The first DCT of the modern era was used in the 2003 Volkswagen Golf R32. Since the late 2000s, DCTs have become increasingly widespread, and have supplanted hydraulic automatic transmissions in various models of cars.
More generally, a transmission with several clutches can be called a multi clutch transmission. For example, the Koenigsegg Jesko has a transmission with one clutch per gear, making up for a total of 7 clutches.
The fundamental principle of a DCT is that one clutch drives a gear-set for the even-numbered gears, while the other clutch drives the odd-numbered gears. Since the DCT can pre-select an odd gear while the vehicle is being propelled in an even gear (or vice versa), DCTs can shift several times faster than is possible with a manual transmission. By timing the operation of one clutch to engage at the precise moment that the other is disengaging, a DCT can shift gears without interrupting the torque supply to the wheels.
A DCT uses clutch packs (as per a manual transmission), rather than the torque converter used by traditional (hydraulic) automatic transmissions. The DCT clutches are either "wet" or "dry" and are similar to the clutches used in most motorcycles.
Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.
Discute de l'innovation, de l'apprentissage de l'échec, de la création de valeur, des défis dans le développement du matériel et des logiciels, et du rôle des premiers adoptants.
Explore les guides d'ondes à fibres optiques, les modes de propagation, les fibres monomodes et multimodes, la fabrication et les applications dans la transmission de données.
Une boîte de vitesses robotisée est une boîte de vitesses mécanique à engrenages parallèles à laquelle est greffé un système automatisé électrotechnique, qui pilote les sélecteurs et le ou les embrayages, souvent en association avec un système électrique ou hydraulique, et qui possède deux modes de fonctionnement : mode automatique, comme une boîte automatique changeant les rapports au moment le plus opportun ; mode manuel, dans le cas où le conducteur souhaite changer de rapport à l'aide de boutons, palett
A semi-automatic transmission is a multiple-speed transmission where part of its operation is automated (typically the actuation of the clutch), but the driver's input is still required to launch the vehicle from a standstill and to manually change gears. Semi-automatic transmissions were almost exclusively used in motorcycles and are based on conventional manual transmissions or sequential manual transmissions, but use an automatic clutch system.