Publications associées à Thermistance

A Procedure to Compensate for the Response Drift of a Large Set of Thermistors

The drift of temperature measurements by semiconductor negative temperature coefficient thermistors is a well-known problem. This study analyzes the drift characteristics of the thermistors designed and used at the Royal Netherlands Institute for Sea Resea ...

American Meteorological Society2016

Twin-box ITER joints under electromagnetic transient loads

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov, Stephen Alfred March

The ITER Toroidal Field (TF) coil winding packs are designed to be wound in double-pancakes. The twin-box joint provides the electrical pancake-to-pancake connection between the two Nb3Sn 68 kA conductors and electrical coil-to-bus bar connection between t ...

Elsevier Science Sa2015

Defect ordering and defect-domain-wall interactions in PbTiO3: A first-principles study

Nava Setter, Nicola Marzari, Dragan Damjanovic, Anand Chandrasekaran

The properties of ferroelectric materials, such as lead zirconate titanate (PZT), are heavily influenced by the interaction of defects with domain walls. These defects are either intrinsic or are induced by the addition of dopants. We study here PbTiO3 (th ...

Amer Physical Soc2013

Effects of Thermal Losses on the Heating of a Multifunctional LTCC Module for Atomic Clock Packaging

Peter Ryser, Thomas Maeder, Fabrizio Vecchio, Conor Joseph Slater

An innovative multifunctional LTCC module has been designed for miniature atomic clock packaging. The components of miniature atomic clocks need to be efficiently packaged and connected to each other, and a precise temperature control is required for them. ...

Trans Tech Publications2012

Effects of Thermal Losses on the Heating of a Multifunctional LTCC Module for Atomic Clock Packaging

Peter Ryser, Thomas Maeder, Fabrizio Vecchio, Conor Joseph Slater

An innovative multifunctional LTCC module has been designed for miniature atomic clock packaging. The components of miniature atomic clocks need to be efficiently packaged and connected to each other, and a precise temperature control is required for them. ...

Trans Tech Publications Ltd2012

Integrated SMD pressure/flow/temperature multisensor for compressed air in LTCC technology: Thermal flow and temperature sensing

Peter Ryser, Thomas Maeder, Yannick Sébastien Fournier, Nicolas Craquelin, Jean-Bastien Coma

In this work, we present and analyse the flow-sensing part of a recently-developed multisensor in LTCC (low- temperature co-fired ceramic) technology; this device integrates flow / pressure / temperature sensing and is designed for diagnostics monitoring o ...

Elsevier2011

In situ Reduction and Oxidation of Nickel from Solid Oxide Fuel Cells in a Transmission Electron Microscope

Jan Van Herle, Aïcha Hessler-Wyser, Quentin Thomas Jeangros, Antonin Faes

Environmental transmission electron microscopy was used to characterize in situ the reduction and oxidation of nickel from a Ni/YSZ solid oxide fuel cell anode support between 300-500°C. The reduction is done under low hydrogen pressure. The reduction init ...

2009

Subsolidus phase equilibria in the PbO-poor part of the TiO2–PbO–SiO2 system and its application in low-temperature thick-film dielectrics

Thomas Maeder, Caroline Jacq, Marko Hrovat

Subsolidus equilibria in the PbO-poor part of the TiO2–PbO–SiO2 diagram were studied with the aim of investigating possible applications for low-temperature thick-film dielectrics. The tie lines are between PbTiO2 and PbSiO3, and between PbTiO3 and SiO2. T ...

2006

An integrated inductive proximity sensor

Philippe Passeraub

Inductive proximity sensors are widely used for the contactless measurement of object or target displacement and position in numerous technical products and systems. They are found in various application domains such as transportation, robots, assembly lin ...

EPFL1999