Publications associées à Plasterwork

Testing and nonlinear modelling of industrialized light-frame wooden diaphragms including optimized nailing and nonstructural sheathing

This article presents the outcomes of a large project towards the investigation of the lateral performance of full-scale industrialized light-frame wooden diaphragms. 10 full-scale diaphragms of 3.6 m by 2.4 m were tested under in-plane lateral loading (mo ...

Elsevier Sci Ltd2023

Hydration and mixture design of calcined clay blended cements: review by the RILEM TC 282-CCL

Karen Scrivener, Franco Alberto Zunino Sommariva, Mohsen Ben Haha, François Henri Avet, Anuj Parashar, Yuvaraj Dhandapani, Sreejith Krishnan

The RILEM technical committee 282-CCL: Calcined Clays as Supplementary Cementitious Materials, investigates all the aspects related to calcined clays, from clay exploration and characterization to calcination process, hydration reactions and concrete prope ...

SPRINGER2022

Insights on chemical and physical chloride binding in blended cement pastes

Karen Scrivener, Fabien Jacques Michel Georget, William Wilson, Julien Nicolas Gonthier

This study investigates chloride binding in blended cement pastes exposed to 0.5 M NaCl solutions (with and without pH adjustment) using X-ray diffraction and energy-dispersive X-ray spectroscopy image analysis (edxia). The aim is to better understand the ...

Pergamon-Elsevier Science Ltd2022

Resistance of cementitious materials to sulfate attack: quantifying performance with a reliable unidirectional approach

Qiao Wang

Depending on the environmental conditions, concrete materials can come into contact with sulfate ions which are widely present in rivers, underground water, sewers, seawater and soil. Sulfates can react with the cement paste in concrete and cause damage wh ...

EPFL2022

Shear behavior of single- and triple-thickness masonry panels strengthened by bed-joint structural repointing

Ricardo Javier Serpell Carriquiry

Bed-joint structural repointing is a widely used strengthening technique in historic masonry constructions, particularly in applications where the material appearance needs to be preserved. Despite its wide use, limited research is available on the effecti ...

ELSEVIER SCI LTD2021

Influence of low curing temperatures on the tensile response of low clinker Strain Hardening UHPFRC under full restraint

Emmanuel Denarié, Mohamed Abdul Hafiz

The tensile response of strain hardening UHPFRC under full restraint, subjected to curing temperatures of 20 °C, 10 °C, 5 °C, was investigated for two types of mixes with silica fume; Mix I with pure type I cement and Mix II with 50% replacement of cement ...

Pergamon-Elsevier Science Ltd2020

Hydration development and thermal performance of calcium sulphoaluminate cements containing microencapsulated phase change materials

Diana Londoño Zuluaga

Microencapsulated phase change materials (MPCM) incorporated in buildings walls can reduce indoor temperature fluctuations, conserving energy and enhancing thermal comfort. MPCM were incorporated in calcium sulphoaluminate cement (CSA) at high concentratio ...

Pergamon-Elsevier Science Ltd2020

Visco-elastic behavior of blended cement pastes at early ages

Karen Scrivener, Zhangli Hu, Adrien Jean Régis Maurice Hilaire, Pietro Lura

This study aims at elucidating the visco-elastic behavior of hardening blended cement pastes, focusing on uni-axial basic compressive creep tests at early loading ages. Cement pastes with Portland cement only or blended with quartz or fly ash (both at a su ...

ELSEVIER SCI LTD2020

Reactivity and Performance of Limestone Calcined-Clay Cement (LC3) Cured at Low Temperature

Karen Scrivener, Franco Alberto Zunino Sommariva

Limestone calcined-clay cements (LC3) take advantage of the synergetic effects of calcium carbonate reaction with the additional aluminium provided by the calcined clay. As temperature decreases, calcium carbonate solubility increase, therefore, the early- ...

SPRINGER2018

Modified poly(carboxylate ether)-based superplasticizer for enhanced flowability of calcined clay-limestone-gypsum blended Portland cement

Karen Scrivener, Buse Tatli, Aurélie Rosine Favier, Amin Hodaei, Tunahan Aytas

Supplementary materials that are utilized to replace ordinary Portland cement (OPC) decrease the workability of the cementitious mixtures and superplasticizers are usually added to cement to control their fluidity. In general, current superplasticizers are ...

Pergamon-Elsevier Science Ltd2017