Publications associées à Non-ferrous metal

Micromechanics of oxide inclusions in ferrous alloys

Oxide inclusions are inevitably present in steel as a direct consequence of the steelmaking process; as a result, a cubic centimetre of modern steel will generally contain about a million of these hard and brittle micrometre-sized ceramic particles. Inclus ...

EPFL2023

Atomic doping & coating for Electrocatalysis & Li-ion batteries

Albert Claude Jean-Pierre Daubry

Molybdenum atomic-doping on bio-waste derived nitrogen-doped conductive carbon electrocatalyst was synthesized and investigated for the dinitrogen reduction to ammonia in alkaline media. The assessment of the catalytic activity was found to be non-trivial ...

EPFL2022

The design and synthesis of nanostructured hydrogen oxidation reaction electrocatalysts for hydroxide exchange membrane fuel cells

Weiyan Ni

Hydrogen fuel cell is a promising green technology that transforms the chemical energy in hydrogen into electricity. Currently, most of the efforts are focused on developing proton exchange membrane fuel cells (PEMFCs), however they are heavily dependent o ...

EPFL2021

Atomic scale investigations of fracture in metal alloys

Eleanor Yi Kei Mak

The demand for metal alloys with superior structural performance in industrial applications continues to increase, as does the need for more-energy efficient materials and methods. Many materials that are otherwise attractive for structural applications ar ...

EPFL2021

A ductility criterion for bcc high entropy alloys

William Curtin, Binglun Yin, Eleanor Yi Kei Mak

A current goal driving alloy development is the identification of alloy compositions for high temperature applications but with the additional requirement of sufficient ductility at ambient temperatures. Multicomponent, single-phase, polycrystalline High E ...

PERGAMON-ELSEVIER SCIENCE LTD2021

Predicting the reflectivity and colour of metals from first principles

Gianluca Prandini

Gold and copper are the only two elemental metals that show a characteristic colour, due to the presence of a drop in the reflectivity curve inside the visible range. Reflectivities of all other metals are in general high and flat for all visible frequenci ...

EPFL2019

Impact of CO2 injection on the hydro-mechanical behaviour of a clay-rich caprock

Lyesse Laloui, Valentina Favero

The safe storage of CO2 in deep reservoir units requires an efficient sealing of the overlaying caprock. The acidic environment caused by the dissolution of CO2 into the pore fluid can induce changes in the microstructure of the material over the long term ...

2018

Recent progress for reversible homogeneous catalytic hydrogen storage in formic acid and in methanol

Gabor Laurenczy, Matthias Beller

Development of technologies using hydrogen as an energy carrier instead of fossil fuels is strongly required today. Especially, new, reversible, sustainable hydrogen storage technologies have received increasing attention. Formic acid (FA) and methanol (CH ...

Elsevier2018

The surprising influence of continuous alternating electric current on recrystallization behaviour of a cold-rolled Aluminium alloy

Cyril Cayron, Roland Logé, Ke Huang

Pronounced acceleration of recrystallization in cold worked metals is generally observed during annealing with additional high density electric current pulses. In this work, continuous alternating current of low density was applied to heat cold-rolled samp ...

Elsevier2017

Microalloying for the controllable delay of precipitate formation in metal alloys

William Curtin, Michael Frederick Francis

A model is presented to predict the effectiveness of dilute solutes in delaying precipitate formation, with application to natural and artificial aging in metal alloys. Control of aging is achieved via the binding, at natural aging temperatures, and releas ...

Elsevier2016