John BotsisJohn (Ioannis) Botsis obtained his diplôme in civil engineering at the University of Patras, Greece in 1979. He continued his education at Case Institute of Technology in Cleveland Ohio/USA, where he received his MS and Ph.D. in 1984. After two years at the research center for national defense in Athens he was nominated assistant professor at the University of Illinois in Chicago, associate in 1991 and full professor in 1995. In 1996, he was nominated professor of solids and structural mechanics at the EPFL. At EPFL he teaches mechanics of structures and mechanics of continuous media´ at the bachelors level and Fracture mechanics at the masters and doctoral levels. His research covers the mechanics of solids and structures, fracture mechanics and micromechanics of polymers, metals and their composites as well as biomechanics. He is also actively involved in full-filed optical methods for surface strain measurements as well as internal strain measurements using fiber Bragg grating sensors, aimed at characterizing micromechanics of fracture, residual strains and strain distribution in composite laminates for structural monitoring. Funding for his research comes from the Swiss National Science Foundation, State Secretariat for Education and Research and Swiss industry. He retired on February 28, 2020.
Hatice Altug2020-current Full Professor at the Institute of Bioengineering, EPFL, Switzerland2013-2020 Associate Professor (with tenure) at the Institute of Bioengineering, EPFL, Switzerland 2013 Associate Professor (with tenure) at Electrical and Computer Engineering Department of Boston University, USA 2007-2013 Assistant Professor (tenure-track) at Electrical and Computer Engineering Department of Boston University, USA 2007 Post-doctoral Fellow at Center for Engineering in Medicine of Harvard Medical School, USA 2000-2007 PhD. in Applied Physics at Stanford University, USA 1996-2000 B.S. in Physics at Bilkent University, Turkey
Yves BellouardDr. Yves Bellouard is Associate Professor in Microengineering at Ecole Polytechnique Fédérale de Lausanne (EPFL) in Switzerland, where he heads the Galatea lab and the Richemont Chair in micromanufacturing. He received a BS in Theoretical Physics and a MS in Applied Physics from Université Pierre et Marie Curie in Paris, France in 1994-1995 and a PhD in Microengineering from Ecole Polytechnique Fédérale de Lausanne (EPFL) in Lausanne, Switzerland in 2000. For his PhD work, he received the Omega Scientific prize (2001) for outstanding contribution in the field of microengineering for his work on Shape Memory Alloys. Before joining EPFL in 2015, he was Associate Professor at Eindhoven University of Technologies (TU/e) in the Netherlands and prior to that, Research Scientist at Rensselaer Polytechnic Institute (RPI) in Troy, New York for about four years where he started working on femtosecond laser processing of glass materials. From 2010 until 2013, Yves Bellouard initiated and coordinated the Femtoprint project, a European research initiative aiming at investigating a table-top printer for microsystems ('3D printing of microsystems'). In 2013, he received a prestigious ERC Starting Grant (Consolidator-2012) from the European Research Council and a JSPS Fellowship from the Japan Society for the Promotion of Science. His current research interests are on new paradigms for system integration at the microscale and in particular laser-based methods to tailor material properties for achieving higher level of integration in microsystems, like for instance integrating optics, mechanics and fluidics in a single monolith. These approaches open new opportunities for direct-write methods of microsystems (3D printing). Personal website
Reymond ClavelReymond CLAVEL obtained his degree in mechanical engineering at the Federal Institute of Technology of Lausanne (EPFL), Switzerland, in 1973. After nine years of gathered experience in industrial plants at Hermes Precisa International (research and development), he was appointed professor at the EPFL, where he obtained his PhD degree in parallel robotics in 1991. He was then consecutively entrusted with the following positions: Head of the department, Director of the Section of micro engineering and, in 1993, Director of the Laboratory of robotics systems (LSRO). His present research topics are parallel robotics, high speed and high precision robotics, medical and surgical robotics applications, surgical instrumentation and precision mechanisms.
Reymond Clavels research successes in parallel and industrial robotics received worldwide special mentions.
Awards :
1989: Laureate of the JIRA AWARD (Japan Industrial Robot Association) for the DELTA parallel robot invented in 1985.
1996: Project winner of the Technologiestandort Schweiz competition and ABB Sonderpreis for the best robotics project.
1998: His laboratory is awarded the Grand Prix de lInnovation in Monaco for new robot technologies.
1999: Laureate of the Golden Robot Award for the DELTA Robot.
2003: Each of his three different submitted projects received the Swiss Technology Award.
2005: Project winner of the Swiss Technology Award competition with further the Sonderpreis 2005 from the Vontobel Foundation in the field of Inventing the future.
2006: Project winner of the Swiss Technology Award competition with Quantum leap into world of nano-EDM (a new high precision EDM machine based on the Delta kinematics).
2007: Two projects based on the LSROs researches are winner of the Swiss Technology Award competition: Cyberthosis for paraplegia rehabilitation (a collaboration with the company Swortec and the Fondation Suisse pour les Cyberthèses (FSC)) and the Microfactory realized in partnership with the CSEM .
