Concept
Turing pattern
Personnes associées (31)
Denis Duboule
Denis Duboule est né en 1955. De Nationalités Suisse et Française, il étudie la biologie à lUniversité de Genève où il reçoit un PhD dans le domaine de lembryologie des mammifères en 1984. Il passe ensuite 10 ans à létranger, dabord comme post-doc et group leader à la faculté de Médecine de Strasbourg (CNRS), puis au Laboratoire Européen de Biologie Moléculaire, à Heidelberg (Allemagne). En 1993, il est nommé Professeur ordinaire à lUniversité de Genève, où il dirige le département de Génétique et Evolution depuis 1997. En 2001 il prend la direction du pôle dexcellence NCCR aux Frontières de la Génétique et celle de la division médecine-Biologie du FNS en 2012. En 2006, il est nommé Professeur ordinaire à lEPFL, Lausanne, où il dirige le laboratoire de Génomique du Développement (UpDUB).
Ses activités de recherche sexercent dans le domaine de lembryologie, de la génétique et de la génomique du développement des mammifères, dans le contexte général de lEvolution des structures et des organes. En particulier, son laboratoire a été associé à de nombreuses recherches dans le domaine de lanalyse structurelle et fonctionnelle des gènes architectes (Hox) et de leur régulation transcriptionnelle pendant le développement précoce. Denis Duboule est également actif dans le domaine de la communication de la science. Il est membre de lAcademia Europea ainsi que dautres académies. Il est également membre de lInstitut de France (Académie des Sciences), de la Société Royale (UK) et de lAcadémie des Sciences Américaine (NAS). Il a reçu plusieurs prix et distinction, notamment le Prix Marcel Benoist, le Prix Louis-Jeantet de Médecine en 1998 et le Prix international de lINSERM en 2010. Voir également https://fr.wikipedia.org/wiki/Denis_Duboule.
Jürgen Brugger
I am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
Andrew Charles Oates
After an undergraduate degree in Biochemistry at the University of Adelaide with Honours in Robert Saint’s lab, Andrew Oates received his Ph.D. at the Ludwig Institute for Cancer Research and the University of Melbourne in the lab of Andrew Wilks. His postdoctoral time was at Princeton University and the University of Chicago in the lab of Robert Ho, where his studies on the segmentation clock in zebrafish began in 1998. In 2003 he moved to Germany and started his group at the Max Planck Institute for Molecular Cell Biology and Genetics in Dresden. In 2012 he accepted a position at University College London as Professor of vertebrate developmental genetics and moved his group to the MRC-National Institute for Medical Research at Mill Hill in London. From April 2015, he became a member of the Francis Crick Institute in London. In September 2016, he joined École polytechnique fédéral de Lausanne (EPFL) in Switzerland as a Professor, where he is the head of the Timing, Oscillation, Patterns Laboratory. From April 2018 he served as Director of the Institute of Bioengineering, and from January 2021 became the Dean of the School of Life Sciences.
The Timing, Oscillation, Patterns Laboratory is composed of biologists, engineers, and physicists using molecular genetics, quantitative imaging, and theoretical analysis to study a population of coupled genetic oscillators in the vertebrate embryo termed the segmentation clock. This system drives the rhythmic, sequential, and precise formation of embryonic body segments, exhibiting rich spatial and temporal phenomena spanning from molecular to tissue scales.
Tobias Kippenberg
Tobias J. Kippenberg is Full Professor of Physics at EPFL and leads the Laboratory of Photonics and Quantum Measurement. He obtained his BA at the RWTH Aachen, and MA and PhD at the California Institute of Technology (Caltech in Pasadena, USA). From 2005- 2009 he lead an Independent Research Group at the MPI of Quantum Optics, and is at EPFL since. His research interest are the Science and Applications of ultra high Q microcavities; in particular with his research group he discovered chip-scale Kerr frequency comb generation (Nature 2007, Science 2011) and observed radiation pressure backaction effects in microresonators that now developed into the field of cavity optomechanics (Science 2008). Tobias Kippenberg is alumni of the “Studienstiftung des Deutschen Volkes”. For his invention of “chip-scale frequency combs” he received he Helmholtz Price for Metrology (2009) and the EFTF Young Investigator Award (2010). For his research on cavity optomechanics, he received the EPS Fresnel Prize (2009). In addition he is recipient of the ICO Prize in Optics (2014), the Swiss National Latsis award (2015), the German Wilhelm Klung Award (2015) and ZEISS Research Award (2018). He is fellow of the APS and OSA, and listed since 2014 in the Thomas Reuters highlycited.com in the domain of Physics. EDUCATION 2009: Habilitation (Venia Legendi) in Physics, Ludwig-Maximilians-Universität München 2004: PhD, California Institute of Technology (Advisor Professor Kerry Vahala) 2000: Master of Science (Applied Physics), California Institute of Technology 1998: BA in Physics, Technical University of Aachen (RWTH), Germany 1998: BA in Electrical Engineering, Technical University of Aachen (RWTH), Germany ACADEMIC POSITIONS 2013 - present: Full Professor EPFL 2010 - 2012: Associate Professor EPFL 2008 - 2010: Tenure Track Assistant Professor, Ecole Polytechnique Federale de Lausanne 2007 - present: Marie Curie Excellent Grant Team Leader, Max Planck Institute of Quantum Optics (Division of Prof.T.W. Hänsch) 2005 - present: Leader of an Independent Junior Research Group, Max Planck Institute 2005- present: Habilitant (Prof. Hänsch) Ludwig-Maximilians-Universität (LMU) 2005-2006: Postdoctoral Scholar, Center for the Physics of Information, California Institute of Technology 2000-2004: Graduate Research Assistant, California Institute of Technology PRIZES AND HONORS: ZEISS Research Award 2018 Fellow of the APS 2016 Klung-Wilhelmy Prize 2015 Swiss Latsis Prize 2014 Selected Thomson Reuters Highly Cited Researcher in Physics, 2014/2015 ICO Prize, 2013 EFTF Young Scientist Award (for "invention of microresonator based frequency combs") 2010 Fresnel Prize of the European Physical Society (for contributions to Optomechanics) 2009 Helmholtz Prize for Metrology (for invention of the monolithic frequency comb) 2009 1st Prize winner of the EU Contest for Young Scientists, Helsinki, Finland. Sept. 1996 Jugend forscht 1st Physics Prize at the German National Science Contest May 1996 FELLOWSHIPS Fellow of the German National Merit Foundation ("Studienstiftung des Deutschen Volkes") 1998-2002 Member of the Daimler-Chysler-Fellowship-Organization 1998-2002 Dr. Ulderup Fellowship 1999-2000 RESEARCH INTERESTS Experimental and theoretical research in photonics, notably high Q optical microcavities and their use in cavity quantum optomechanics and frequency metrology PUBLICATIONS AND OFTEN CITED METRICS*: >70 Publications in peer reviewed journals Researcher Google Profile: http://scholar.google.ch/citations?user=PRCbG2kAAAAJ&hl=en h-Index 54 (Google scholar H: 64, >25,000 citations) Thomson Reuters/Claravite List of Highly Cited Researchers (2014,2015,2016,2017) careful in its use: https://www.aps.org/publications/apsnews/201411/backpage.cfm KEY PUBLICATIONS AND REVIEWS: A. Ghadimi, et al. Elastic strain engineering for ultra high Q nanomechanical oscillators Science, (2018) Trocha, et al. Ultrafast distance measurements using soliton microresonator frequency combs Science, Vol. 359 (2018) [joint work with C. Koos] Pablo-Marin et al. Microresonator-based solitons for massively parallel coherent optical communications Nature (2017) [joint work with C. Koos] V. Brasch, et al. Photonic chip-based optical frequency comb using soliton Cherenkov radiation. Science, vol. 351, num. 6271 (2015) Aspelmeyer, M., Kippenberg, T. J. & Marquardt, F. Cavity optomechanics. Reviews of Modern Physics 86, 1391-1452, (2014) Wilson, D. J. et al. Measurement and control of a mechanical oscillator at its thermal decoherence rate. Nature (2014). Verhagen, E., Deleglise, S., Weis, S., Schliesser, A. & Kippenberg, T. J. Quantum-coherent coupling of a mechanical oscillator to an optical cavity mode. Nature 482, 63-67 (2012). Kippenberg, T. J., Holzwarth, R. & Diddams, S. A. Microresonator-based optical frequency combs. Science 332, 555-559, (2011). Weis, S. et al. Optomechanically induced transparency. Science 330, 1520-1523 (2010). Kippenberg, T. J. & Vahala, K. J. Cavity optomechanics: back-action at the mesoscale. Science 321, 1172-1176, (2008). Del'Haye, P. et al. Optical frequency comb generation from a monolithic microresonator. Nature (2007) Schliesser, A., DelHaye, P., Nooshi, N., Vahala, K. & Kippenberg, T. Radiation Pressure Cooling of a Micromechanical Oscillator Using Dynamical Backaction. Physical Review Letters 97, (2006).
Anton Schleiss
Prof. Dr. Anton J. Schleiss graduated in Civil Engineering from the Swiss Federal Institute of Technology (ETH) in Zurich, Switzerland, in 1978. After joining the Laboratory of Hydraulic, Hydrology and Glaciology at ETH as a research associate and senior assistant, he obtained a Doctorate of Technical Sciences on the topic of pressure tunnel design in 1986. After that he worked for 11 years for Electrowatt Engineering Ltd. (now Pöyry) in Zurich and was involved in the design of many hydropower projects around the world as an expert on hydraulic engineering and underground waterways. Until 1996 he was Head of the Hydraulic Structures Section in the Hydropower Department at Electrowatt. In 1997, he was nominated full professor and became Director of the Laboratory of Hydraulic Constructions (LCH) in the Civil Engineering Department of the Swiss Federal Institute of Technology Lausanne (EPFL). The LCH activities comprise education, research and services in the field of both fundamental and applied hydraulics and design of hydraulic structures and schemes. The research focuses on the interaction between water, sediment-rock, air and hydraulic structures as well as associated environmental issues and involves both numerical and physical modeling of water infrastructures. In May 2018, he became Honorary Professor at EPFL. More than 50 PhD and Postdoc research projects have been carried out under his guidance. From 1999 to 2009 he was Director of the Master of Advanced Studies (MAS) in Water Resources Management and Hydraulic Engineering held in Lausanne in collaboration with ETH Zurich and the universities of Innsbruck (Austria), Munich (Germany), Grenoble (France) and Liège (Belgium). From 2006 to 2012 he was the Head of the Civil Engineering program of EPFL and chairman of the Swiss Committee on Dams (SwissCOLD). In 2006, he obtained the ASCE Karl Emil Hilgard Hydraulic Price as well as the J. C. Stevens Award. He was listed in 2011 among the 20 international personalities that “have made the biggest difference to the sector Water Power & Dam Construction over the last 10 years”. Between 2014 and 2017 he was Council member of International Association for Hydro-Environment Engineering and Research (IAHR) and he was chair of the Europe Regional Division of IAHR until 2016. For his outstanding contributions to advance the art and science of hydraulic structures engineering he obtained in 2015 the ASCE-EWRI Hydraulic Structures Medal. The French Hydro Society (SHF) awarded him with the Grand Prix SHF 2018. After having served as vice-president between 2012 and 2015 he was president of the International Commission on Large Dams (ICOLD) from 2015 to 2018. On behalf of ICOLD he his the coordinator of the EU Horizon 2020 project "Hydropower Europe". With more than 40 years of experience he is regularly involved as a consultant and expert in large water infrastructures projects including hydropower and dams all over the world. Awards (besides those mentioned above): ASCE-Journal of Hydraulic Engineering Outstanding Reviewer Recognition 2013 ASCE-EWRI-Journal of Hydraulic Engineering 2014 Best Technical Note
Pedro Miguel Nunes Pereira de Almeida Reis
Pedro M. Reis is a Professor of Mechanical Engineering at the École Polytechnique Fédérale de Lausanne (EPFL) in Switzerland, where he is the Director of the Institute of Mechanical Engineering. Prof. Reis received a B.Sc. in Physics from the University of Manchester, UK (1999), a Certificate of Advanced Studies in Mathematics (Part III Maths) from St. John’s College and DAMTP, University of Cambridge (2000), and a Ph.D. in physics from the University of Manchester (2004). He was a postdoc at the City College of New York (2004-2005) and at the CNRS/ESPCI in Paris (2005-2007). He joined MIT in 2007 as an Instructor in Applied Mathematics. In 2010 he moved to MIT’s School of Engineering, with dual appointments in Mechanical Engineering and Civil & Environmental Engineering, first as the Esther and Harold E. Edgerton Assistant Professor and, since the summer of 2014 as Gilbert W. Winslow Associate Professor. In October 2013, the Popular Science magazine named Prof. Reis to its 2013 “Brilliant 10” list of young stars in Science and Technology. He has received the 2014 CAREER Award (NSF), the 2016 Thomas J.R. Hughes Young Investigator Award (Applied Mechanics Division of the ASME), the 2016 GSOFT Early Career Award for Soft Matter Research (APS), he is a Fellow of the APS, and he is the 2021 President of the Society of Engineering Science (SES).
Matthias Lütolf
Matthias Lutolf is Full Professor at EPFL’s Institute of Bioengineering, with a cross appointment in the Institute of Chemical Sciences and Engineering. Lutolf was trained as a Materials Engineer at ETH Zurich where he also carried out his PhD studies (with Jeffrey Hubbell) that were awarded with an ETH medal. He continued his research training as a Post-Doctoral Fellow in Stem Cell Biology (with Helen Blau) at Stanford University. He has served as the Director of the Institute of Bioengineering from 2014 to 2018. Lutolf is an internationally recognized leader in the fields of stem cell bioengineering and tissue engineering. His research program uniquely combines stem cell biology with engineering principles and quantitative thinking. His team, composed of engineers, chemists, physicists, cell and developmental biologists, strives to develop technologies that have true biological and medicinal function and applicability. Lutolf’s work has led to more than 110 peer-reviewed scientific publications, many of which published in highly reputed journals, more than 25 patents, and the commercialization of several products. Current research in the Lutolf lab is focused on the bioengineering of miniature tissues, termed organoids, that are generated from self-organizing stem cells.
Luis Guillermo Villanueva Torrijo
Guillermo Villanueva is a Tenure Track Assistant Professor at the Ecole Polytechnique Federale de Lausane (EPFL), Switzerland, in the Mechanical Engineering Institute (IGM). Before joining EPFL he was a Marie Curie post-doctoral scholar at DTU (Denmark) and Caltech (California, US); and before a post-doc at EPFL-LMIS1. He received his M.Sc. in Physics in Zaragoza (Spain) and his PhD from the UAB in Barcelona (Spain).
Since the start of his PhD (2002), Prof. Villanueva has been active in the fields of NEMS/MEMS for sensing, having expertise from the design and fabrication to the characterization and applicability. He has co-authored more than 75 papers in peer-reviewed journals (h-index of 24 WoK, 32 GoS) and more than 100 contributions to international conferences.
He is serving, or has served, on the program committees of IEEE-NEMS, IEEE-Sensors, MNE, IEEE-FCS and Transducers. He is editor of Microelectronic Engineering. He has co-organized MNE2014 and SNC2015; and he is currently co-organizing the short courses at Transducers 2019 and the 16th International Workshop on Nanomechanical Sensors (NMC2019).