Publications associées à Vulcanisation

Moulding and Microfluidic Wet Spinning of the Soft Polymer Optical Fibers for Sensory Applications

Polymer optical fibre (POFs) based wearable sensors have attracted a lot of attention in the field of healthcare and biomedical applications. They are in particular envision as the next generation of sensors for the continuous, real-time n ...

EPFL2024

Report of RILEM TC 267-TRM: Improvement and robustness study of lime mortar strength test for assessing reactivity of SCMs

Karen Scrivener, Ruben Anton Snellings, Mohsen Ben Haha, Xuerun Li, Shashank Bishnoi, Pawel Tadeusz Durdzinski, Mathieu Antoni, Anuj Parashar, Yuvaraj Dhandapani

RILEM TC 267-TRM is studying tests for the reactivity supplementary cementitious materials (SCMs). In the first phase, the lime reactivity (LR) test, which is standardised in Indian standard (IS)-1727, gave promising correlations with 90-days cement mortar ...

SPRINGER2022

Mechanical Reinforcement of Hydrogels through Physical Crosslinks and Double Network Granular Architecture

Alvaro Lino Boris Charlet

Throughout nature, organisms fabricate a myriad of materials to sustain their lifestyle. Many of the soft materials are composed of water-swollen networks of organic molecules, so-called hydrogels. They generally contribute to the mechanical integrity of t ...

EPFL2022

Increased electromechanical sensitivity of polysiloxane elastomers by chemical modification with thioacetic groups

Yee Song Ko

Chemically cross-linked polydimethylsiloxane (PDMS) elastomers have gained importance as a dielectric in elastic capacitor actuators, which elongate when electrically charged. Common PDMS elastomers have a dielectric permittivity of only about 3 and thus e ...

2020

Flexible support and enhanced groove geometries for gas lubricated bearings

Philipp Kaspar Bättig

Gas lubricated Herringbone-Grooved Journal Bearings (HGJB) are a promising solution to support high-speed rotors in oil-free turbo-machinery due to their compactness, relatively low losses, no need for lubrication and low wear. Gas lubricated bearings, how ...

EPFL2019

In situ Neutron Diffraction during Casting: Determination of Rigidity Point in Grain Refined Al-Cu Alloys

Jean-Marie Drezet, Bastien Gilbert Pierre Mireux

The rigidity temperature of a solidifying alloy is the temperature at which the solid plus liquid phases are sufficiently coalesced to transmit long range tensile strains and stresses. It determines the point at which thermally induced deformations start t ...

Mdpi Ag2014

Fracture Toughness Healing in Epoxy Containing Both Epoxy and Amine Loaded Capsules

Véronique Michaud, Sam Neuser

The feasibility of self-healing epoxy matrices using the same chemistry as the matrix material, namely a standard epoxy-amine system, is demonstrated. The two-component self-healing system is encapsulated in core-shell structures using standard in situ cur ...

Wiley-V C H Verlag Gmbh2014

Determination of Coherency and Rigidity Temperatures in Al-Cu Alloys Using In Situ Neutron Diffraction During Casting

Jean-Marie Drezet, Bastien Gilbert Pierre Mireux

The rigidity temperature of a solidifying alloy is the temperature at which the solid phase is sufficiently coalesced to transmit tensile stress. It is a major input parameter in numerical modeling of solidification processes as it defines the point at whi ...

Springer2014

Elastomeric substrates with embedded stiff platforms for stretchable electronics

Stéphanie Lacour, Alessia Romeo

Stretchable electronics typically integrate hard, functional materials on soft substrates. Here we report on engineered elastomeric substrates designed to host stretchable circuitry. Regions of a stiff material, patterned using photolithography, are embedd ...

American Institute of Physics2013

The physics and micro-mechanics of nano-voids and nano-particles in polymer combinations

In this article the role of voids or particulate inclusions of different sizes on mechanical properties and particularly on toughness in several polymers is discussed. With decreasing void sizes and intervoid distances, the influence of the interphase mate ...

Elsevier Sci Ltd2013