Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
In this paper, the chemorheological and dynamic mechanical behavior of melamine-formaldehyde (MF) resins of four different formaldehyde/melamine (F/M) molar ratios (1.25, 1.5 1.75 and 2.00) are investigated. MF resins polymerize via a polycondensation reac ...
The influence of cure temperature, composition and chemical structure on the morphology resulting from chemically induced phase separation has been investigated for different epoxy functionalized dendritic hyperbranched polymers blended with diglycydil bis ...
Hydrogel membranes formed by interfacially photopolymerizing poly(ethylene glycol) (PEG) diacrylate precursor solution were prepared from PEG diacrylate of molecular weights (MW) ranging from 2000 (2K) to 20000 (20K) with concentrations ranging from 10% to ...
Unsaturated Polyester (UP) resins are extensively used as a matrix for the production of composites due to their low cost and versatility. Their significant polymerization shrinkage has however a negative impact on the dimensional stability of the molded p ...
In blends of unsaturated polyester (UP), poly (vinyl acetate) (PVAc), and styrene, a reaction-induced phase separation occurs upon curing that is due to the crosslinking between styrene and the UP molecules. The evolution of the morphology was observed by ...
The synthesis of novel hybrid hydrogels by stepwise copolymn. of multi-arm vinyl sulfone-terminated poly(ethylene glycol) macromers and a-w cysteine oligopeptides via Michael-type addns. is described. Crosslinking kinetics, studied by in situ rheometry, ca ...
The relative sequence of shrinkage and evolution of modulus of a thermoset resin during cure leads to the build-up of internal stresses, especially if the resin is constrained by the presence of other materials in the form of a substrate or reinforcing fib ...
The objective of this study was to investigate the behavior of highly functional acrylates, during isothermal ultraviolet (UV) curing. The materials included a pentafunctional acrylate and two acrylated hyperbranched polymers, one with a stiff polyester co ...
In blends of unsaturated polyester (UP), poly (vinyl acetate) (PVAc), and styrene, a reaction-induced phase separation occurs upon curing that is due to the crosslinking between styrene and the UP molecules. The evolution of the morphology was observed by ...
The curing reaction of an epoxy resin [diglycidyl ether of bisphenol A (DGEBA)] combined with a methyl-hexahydrophtalic anhydride (MHHPA) hardener and a benzyldimethylamine (BDMA) accelerator was studied over a temperature range of 60140°C to build its is ...
