Personnes associées (24)
Lyesse Laloui
Director, EPFL Soil Mechanics LaboratoryDirector, EPFL Civil Engineering SectionEditor in Chief, ElsevierMember of the Swiss Academy of Engineering SciencesFounding Partner, Geoeg & MeduSoilActive in academic research in the following institutions: Lausanne, EPFL, Durham, Duke University, Nanjing, Hohai UniversityProfessor Lyesse Laloui teaches at EPFL, where he directs the Soil Mechanics Laboratory as well as the Civil Engineering Section. He is a founding partner of the international engineering company Geoeg, and the start-up MeduSoil. In addition, he is an adjunct professor at Duke University, USA and an advisory professor at Hohai University, China as well as honorary director of the International Joint Research Center for Energy Geotechnics in China.He is the recipient of an Advance ERC grant for his BIO-mediated GEO-material Strengthening project. Editor in Chief of the Elsevier Geomechanics for Energy and the Environment journal, he is a leading scientist in the field of geomechanics and geo-energy. He has written and edited 13 books and published over 320 peer reviewed papers; his work is cited more than 6000 times with an h-index of 39 (Scopus). Two of his papers are among the top 1% in the academic field of Engineering. He has given keynote and invited lectures at more than 40 leading international conferences. He has received several international awards (IACMAG, RM Quigley, Roberval) and delivered honorary lectures (Vardoulakis, Minnesota; G.A. Leonards, Purdue; Kersten, Minnesota). He recently acted as the Chair of the international evaluation panel of Civil and Geological Engineering R&D Units of Portugal.Nov. 2019 For further information visit www.epfl.ch/labs/lms/ ;  geoeg.net ; medusoil.com
Jürg Alexander Schiffmann
After obtaining his diploma in mechanical engineering from EPFL in 1999 he co-founded a start-up company dedicated to the design of gas bearing supported rotors. In 2005 he joined Fischer Engineering Solutions where he led the development of small-scale, gas bearing supported high-speed turbomachinery for fuel cell air supplies and for domestic scale heat pumps. In parallel he worked on his PhD, which he obtained from EPFL in 2008 and for which he was awarded the SwissElectric Research Award. He then joined the Gas Turbine Lab at MIT as a postdoctoral associate where he worked on foil bearings and on the experimental investigation of radial diffusers. In 2013 he was nominated assistant professor at the Ecole Polytechnique Fédérale de Lausanne where he founds the Laboratory for Applied Mechanical Design. His current research interest are in gas lubricated bearings, in aerodynamics of small-scale compressors and turbines and in automated design and optimization methodologies.
Daniel Favrat
Daniel Favrat a obtenu à l'EPFL son diplôme d'ingénieur mécanicien en 1972 et le titre de docteur ès sciences techniques en 1976. Il passe ensuite 12 ans dans des centres de recherche industriels au Canada et en Suisse.Depuis 1988, D. Favrat est professeur et directeur du Laboratoire d'énergétique industrielle à l'EPFL. Il est aussi successivement directeur de l'Institut des Sciences de l'énergie et, dès janvier 2007, de l'Institut de Génie Mécanique. Ses recherches portent sur les analyses systémiques prenant en compte l'énergétique, l'environnement et l'économie (optimisation environomique), et les systèmes avancés pour une utilisation plus rationnelle de l'énergie (pompes à chaleur, moteurs, piles à combustible,turbomachines etc.) Il est membre de l'Académie Suisse des Sciences Techniques et vice-président du comité énergie de la Fédération Mondiale des Organisations d'Ingénieurs. Il est éditeur associé du journal "Energy" et l'auteur de deux livres sur la thermodynamique et l'énergétique publiés aux Presses Polytechniques Universitaires Romandes.
Alfred Rufer
Originaire de Diessbach (BE), Alfred Rufer est né en 1951. Il obtient en 1976 le diplôme d'ingénieur électricien de l'EPFL et poursuit son activité dans le même établissement en tant qu'assistant à la chaire d'électronique industrielle. En 1993, il est nommé professeur-assistant au Laboratoire d'électronique industrielle. Au début 1996, il est nommé professeur extraordinaire.  En 1978, il débute son activité dans l'industrie de l'électronique de grande puissance à la société ABB, Asea Brown Boveri à Turgi, où il contribue au développement d'entraînements réglés à fréquence variable. Dès 1985, il exerce la fonction d'assistant technique et de chef de groupe.  De 1988 à 1991, il poursuit le développement de nouveaux systèmes d'électronique de puissance dans différents domaines d'application. A. Rufer est l'auteur et co-auteur de plusieurs demandes de brevet, ainsi que de plusieurs publications. De 1991 à 1992, il est chef d'un département de développement d'appareils d'électronique de réglage et de commande pour l'électronique de puissance. Durant son activité professionnelle dans l'industrie, il participe activement à l'enseignement technique dans plusieurs écoles d'ingénieurs.
François Maréchal
Look at the researcher id
John Christopher Plummer
ÉCOLE POLYTECHNIQUE FÉDÉRALE DE LAUSANNE (EPFL), Lausanne, Switzerland 1989- Collaborateur Scientifique/Chargé de Cours (Lecturer) (1998-) Privat Docent (1998) Laboratoire de Technologie des Composites et Polymères (LTC) (2000-) Laboratoire de Polymères (LP) (1998-2000) UNIVERSITY OF MICHIGAN (UMICH), Ann Arbor, MI, USA 1995-1996 Visiting Scientist, Department of Materials Science and Engineering (DMSE) UNIVERSITY OF CAMBRIDGE, Cambridge, UK 1986-1989 Research Assistant, Physics and Chemistry of Solids Group (PCS), Department of Physics UNIVERSITY OF CAMBRIDGE, Cambridge, UK, Department of Materials 1986 PhD, "Flux Pinning in Type-II Superconductors" UNIVERSITY OF CAMBRIDGE, Cambridge, UK, 1982 BA/MA Honours Degree in Natural Sciences Awards Prix R&R Haenny, 2007, DuPont Research Award, 2003, Commendation, British Polymer Group, Reading 1989 RECENT PUBLICATIONS Ramier J, Da Costa N, Plummer CJG, Leterrier Y, Manson JAE, Eckert R, Gaudiana R, “Cohesion and adhesion of nanoporous TiO2 coatings on titanium wires for photovoltaic applications”, Thin solid films, 516, 1913 (2008). Ramier J, Plummer CJG, Leterrier Y, Manson JAE, Eckert B, Gaudiana R, “Mechanical integrity of dye-sensitized photovoltaic fibers”, Renewable energy, 33, 314 (2008).
  1. Houphouet-Boigny C, Plummer CJG, Wakeman MD, Manson JAE, “Hybrid glass fiber-reinforced thermoplastic nanocomposites”, J. Thermoplast. Comp. Mater., 21, 103 (2008).
Ternat C, Ouali L, Sommer H, Fieber W, Velazco MI, Plummer CJG, Kreutzer G, Klok HA, Manson JAE, Herrmann, “Investigation of the Release of Bioactive Volatiles from Amphiphilic Multiarm Star-Block Copolymers by Thermogravimetry and Dynamic Headspace Analysis”, Macromolecules 41(19), 7079 (2008). Ruggerone, R., Plummer, C.J.G., Negrete Herrera, N., Bourgeat-Lami, E., Månson, J-EA, “Mechanical properties of highly filled latex-based polystyrene/laponite nanocomposites”, Solid State Phenomena Vol. 151, 30 (2009). Plummer, CJG, Dalle Vacche, S, Houphouët-Boigny, C, Michaud, V, Månson, JAE, “Hybrid Glass Mat Reinforced Polypropylene-Montmorillonite Nanocomposites”, Solid State Phenomena Vol. 151, 60 (2009). Ruggerone, R., Plummer, C.J.G., Negrete Herrera, N., Bourgeat-Lami, E., Månson, J-EA, “Highly filled polystyrene–laponite nanocomposites prepared by emulsion polymerization”, European Polm. J. 45, 621 (2009). Ruggerone, R., Plummer, C.J.G., Negrete Herrera, N., Bourgeat-Lami, E., Månson, J-EA, “Fracture mechanisms in polystyrene/laponite nanocomposites prepared by emulsion polymerization”, Engineering Fracture Mechanics 76, 2846 (2009) Clausen P., Andreoni W., Curioni A., Hughs E., Plummer C.J.G. “Adsorption of low-molecular-weight molecules on the surface of a sodium smectite clay: an ab initio study”, Journal of Physical Chemistry C 113, 12293 (2009). Clausen P., Andreoni W., Curioni A., Hughs E., Plummer C.J.G., “Water adsorption on a sodium smectite clay surface: an ab initio study”, Journal of Physical Chemistry C 113, 15218 (2009). Molberg, M, Leterrier, Y., Plummer, C.J.G., Walder, C., Löwe, C., Opris, D.M., Nüesch, F.A., Bauer, S., Månson, J.-A.E., “Frequency dependent dielectric and mechanical behaviour of elastomers for actuator applications”, J. Appl. Phys. 106, 054112 (2009) Clausen P., Signorelli M., Schreiber A., Hughes E., Plummer CJG, Fessas D., Schiraldi A., Månson E. J.-A., “Equilibrium desorption isotherms of water, ethanol, ethyl acetate and toluene on a sodium smectite clay”, Journal of Thermal Analysis and Calorimetry 98, 833 (2009) Micusik, M., Bonnefond, A., Reyes, Y., Bogner, A., Chazeau, L., Plummer, C.J.G., Paulis, M., Leiza, J.R., “Morphology of Polymer/Clay Latex Particles Synthesized by Miniemulsion Polymerization: Modeling and Experimental Results” Macromol. React. Eng. 2010, 4, 432 (2010). Houphouet-Boigny C., Plummer CJG, Vacche SD, Michaud V, Wakeman MD, Månson E. J.-A., “Hybrid Glass Mat-reinforced Polypropylene-Montmorillonite Nanocomposites”, J. Comp. Mater. 44, 1975 (2010). Delabarde, C., Plummer C.J.G., Bourban, P.-E., Månson E. J.-A., “Solidification behavior of PLLA/nHA nanocomposites”, Comp. Sci. & Tech. 70, 1813 (2010). Plummer C.J.G., Ruggerone R., Negrete-Herrera N., Bourgeat-Lami E., Månson J.-A.E., “Small Strain Mechanical Properties of Latex-Based Nanocomposite Films”, Macromol. Symp. 294, 1 (2010). Dalle Vacche, S., Plummer C.J.G., Houphouet-Boigny C., Månson E. J.-A., “Morphology and mechanical properties of isotactic polypropylene glass mat thermoplastic composites modified with organophilic montmorillonite”, J Mater Sci 46, 2112 (2011).
Anton Schleiss
Prof. Dr. Anton J. Schleiss graduated in Civil Engineering from the Swiss Federal Institute of Technology (ETH) in Zurich, Switzerland, in 1978. After joining the Laboratory of Hydraulic, Hydrology and Glaciology at ETH as a research associate and senior assistant, he obtained a Doctorate of Technical Sciences on the topic of pressure tunnel design in 1986. After that he worked for 11 years for Electrowatt Engineering Ltd. (now Pöyry) in Zurich and was involved in the design of many hydropower projects around the world as an expert on hydraulic engineering and underground waterways. Until 1996 he was Head of the Hydraulic Structures Section in the Hydropower Department at Electrowatt. In 1997, he was nominated full professor and became Director of the Laboratory of Hydraulic Constructions (LCH) in the Civil Engineering Department of the Swiss Federal Institute of Technology Lausanne (EPFL). The LCH activities comprise education, research and services in the field of both fundamental and applied hydraulics and design of hydraulic structures and schemes. The research focuses on the interaction between water, sediment-rock, air and hydraulic structures as well as associated environmental issues and involves both numerical and physical modeling of water infrastructures.  In May 2018, he became Honorary Professor at EPFL. More than 50 PhD and Postdoc research projects have been carried out under his guidance. From 1999 to 2009 he was Director of the Master of Advanced Studies (MAS) in Water Resources Management and Hydraulic Engineering held in Lausanne in collaboration with ETH Zurich and the universities of Innsbruck (Austria), Munich (Germany), Grenoble (France) and Liège (Belgium). From 2006 to 2012 he was the Head of the Civil Engineering program of EPFL and chairman of the Swiss Committee on Dams (SwissCOLD). In 2006, he obtained the ASCE Karl Emil Hilgard Hydraulic Price as well as the J. C. Stevens Award. He was listed in 2011 among the 20 international personalities that “have made the biggest difference to the sector Water Power & Dam Construction over the last 10 years”. Between 2014 and 2017 he was Council member of International Association for Hydro-Environment Engineering and Research (IAHR) and he was chair of the Europe Regional Division of IAHR until 2016. For his outstanding contributions to advance the art and science of hydraulic structures engineering he obtained in 2015 the ASCE-EWRI Hydraulic Structures Medal. The French Hydro Society (SHF) awarded him with the Grand Prix SHF 2018. After having served as vice-president between 2012 and 2015 he was president of the International Commission on Large Dams (ICOLD) from 2015 to 2018. On behalf of ICOLD he his the coordinator of the EU Horizon 2020 project "Hydropower Europe". With more than 40 years of experience he is regularly involved as a consultant and expert in large water infrastructures projects including hydropower and dams all over the world.   Awards (besides those mentioned above):  ASCE-Journal of Hydraulic Engineering Outstanding Reviewer Recognition 2013 ASCE-EWRI-Journal of Hydraulic Engineering 2014 Best Technical Note
Jan Van Herle
Né à Anvers, Belgique, 1966. En Suisse depuis 1983. Naturalisé Suisse en 2004 par persuasion de la culture suisse démocratique et participative 'bottom-up'. Pas de double nationalité. Conseiller communal durant 2 mandats de 5 ans de 2006 à 2016. 1987 : Chimiste de l'Université de Bâle (CH). 1988 : Post-grade informatique de l'Ecole d'Ingénieurs de Bâle. 1989 : Stage industriel chez ABB à Baden (CH). 1990-1993 : Thesè EPFL 1994-1995 : Postdoc au Japon (Tokyo). 1996-2000 : Chercheur à l'EPFL, Dpt. Chimie, responsable de groupe. 1998-2000 : Master en Energy Technology, EPFL. 2000 : Cofondateur de HTceramix SA (EPFL spin-off), à Yverdon (actuellement 12 employés). La maison mère SOLIDpower en Italie, qui a acheté notre technologie en 2007, emploie 250 personnes et a levé 70 MCHF. 2000-2012 : 1er Assistant et chargé de cours en STI-IGM. Promu à MER en 2008. 2013-présent: MER responsable d'unité. Output : 135 publications, 120 papiers de conférence, 15 théses de doctorat, 4 thèses en cours, 37 thèses de master. Facteur h-42, >5000 citations. Fonds levés jusqu'à présent >19 MCHF. 5 langues couramment (néerlandais, français, allemand (y.c. suisse-allemand), anglais, espagnol).

Graph Chatbot

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.