Êtes-vous un étudiant de l'EPFL à la recherche d'un projet de semestre?
Travaillez avec nous sur des projets en science des données et en visualisation, et déployez votre projet sous forme d'application sur GraphSearch.
Concept
Weighting filter
Résumé
A weighting filter is used to emphasize or suppress some aspects of a phenomenon compared to others, for measurement or other purposes.
In each field of audio measurement, special units are used to indicate a weighted measurement as opposed to a basic physical measurement of energy level. For sound, the unit is the phon (1 kHz equivalent level).
Sound has three basic components, the wavelength, frequency, and speed. In sound measurement, we measure the loudness of the sound in decibels (dB). Decibels are logarithmic with 0 dB as the reference. There are also a range of frequencies that sounds can have. Frequency is the number of times a sine wave repeats itself in a second. Normal auditory systems can usually hear between 20 and 20,000 Hz. When we measure sound, the measurement instrument takes the incoming auditory signal and analyzes it for these different features. Weighting filters in these instruments then filter out certain frequencies and decibel levels depending on the filter. A weighted filters are most similar to natural human hearing. This allows the sound level meter to determine what decibel level the incoming sound would likely be for a normal hearing human's auditory system.
In the measurement of loudness, for example, an A-weighting filter is commonly used to emphasize frequencies around 3–6 kHz where the human ear is most sensitive, while attenuating very high and very low frequencies to which the ear is insensitive. The aim is to ensure that measured loudness corresponds well with subjectively perceived loudness.
A-weighting is only really valid for relatively quiet sounds and for pure tones as it is based on the 40-phon Fletcher–Munson equal-loudness contour. The B and C curves were intended for louder sounds (though they are less used) while the D curve is used in assessing loud aircraft noise (IEC 537). B curves filter out more medium loudness levels when compared to an A curves. This curve is rarely ever used in the assessment or monitoring of noise levels anymore.
Source officielle
À propos de ce résultat
Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.