Fernando Porté AgelFERNANDO PORTÉ AGEL Professor Director, Wind Engineering and Renewable Energy Laboratory (WIRE) School of Architecture, Civil and Environmental Engineering (ENAC) École Polytechnique Fédérale de Lausanne (EPFL) e-mail: fernando.porte-agel@epfl.ch RESEARCH INTERESTS Environmental fluid mechanics. Computational fluid dynamics. Atmospheric boundary layers. Turbulence. Large-eddy simulation. Wind energy. Wind engineering. Renewable energy. EDUCATION Ph.D. 1999 Johns Hopkins University, Environmental Engineering M.Sc. 1995 Hydrologic Engineering, IHE - Delft, The Netherlands B.S. 1992 Universidad Politécnica de Cataluña, Spain ACADEMIC POSITIONS 2010-present: Full Professor, School of Architecture, Civil and Environmental Engineering (ENAC), École Polytechnique Fédérale de Lausanne (EPFL), Switzerland 2005-2009: Associate Professor, St. Anthony Falls Laboratory and Department of Civil Engineering, University of Minnesota, Minneapolis, MN, USA 2000-2005: Assistant Professor, St. Anthony Falls Laboratory, Department of Civil Engineering, University of Minnesota, Minneapolis, MN, USA AWARDS AND FELLOWSHIPS McKnight Presidential Fellow (2006-2009), University of Minnesota, USA McKnight Land-Grant Professorship (2003-2005), University of Minnesota, USA NASA Young Investigator Award (2001-2004), USA NSF CAREER Award (2001-2006), (Division of Earth Sciences Hydrological Sciences), USA Outstanding Student Paper Award: Hydrology Section, Fall Meeting of the American Geophysical Union; San Francisco, 1998. Research Award (1995-1997): La Caixa fellowship program; Barcelona, Spain. Research Award (1993-1995): Dutch Ministry of Foreign Affairs fellowship. Research Award (1990-1993): Spanish Civil Engineering Association. Christophe BallifChristophe Ballif is director of the Phototovoltaics and Thin Film Electronics Laboratoryb) (PV-Lab at the institute of microengineering (IMT) in Neuchâtel (part of the EPFL since 2009). The lab focus is on the science and technology of high efficiency heterojunction crystalline cells,so-called passivating contacts for solar cells, multi-junction solar cells include novel generation Perovskite on innovative optical high speed detector and on various macroelectronics application. It also deals with energy management with a focus on integration of solar electricity into the energy system. The PV-Lab has strongly contributed to technology transfer and industrialization of novel devices and full technology with numerous companies. Christophe Ballif graduated as a physicist from the EPFL in 1994, where he also obtained in 1998 his Phd degree working on novel PV materials. He accomplished his postdoctoral research at NREL (Golden, US) on compound semiconductor solar cells (CIGS and CdTe). He worked then at the Fraunhofer ISE (Ge) on crystalline silicon photovoltaics (monocrystalline and multi-crystalline) until 2003 and then at the EMPA in Thun (CH) before becoming full professor at the University of Neuchâtel IMT in 2004, taking over the chair of Prof. A. Shah. Since 2013, C.Ballif is also the director of the new CSEM PV-Center, also located in Neuchâtel. The CSEM PV-Center is focussing more on industrialisation and technology transfer in the field of solar energy, including solar electricity management and storage. At the core of the CSEM PV-center activities lies several "pilot lines" for various kinds of solar cells manufacturing, with a focus coating technologies, wet chemistry processes for crystalline silicon, metalisation techniques for solar cells, and a platform for developing "ideal packaging solutions and polymers" for PV modules. In addition, joined facitilites between CSEM and EPFL of over 800 m2 are available for modules manufacturing, measuring and accelerated aging. CSEM PV-center has also full team dedicated to storage and energy systems and operates a joined center with BFH in Biel for research on electrochemical storage. He (co-) authored over 500 journal and technical papers, as well as several patents. He is an elected member of the SATW, member of the scientific council of the Swiss AEE, and member of the board of the EPFL Energy center. In 2016, he recieved the Becquerel prize for his contributions to the field of high efficiency photovoltaics.
Sandro CarraraSandro Carrara a été nommé IEEE Fellow pour ses remarquables réalisations dans le domaine de la conception de biocapteurs CMOS à l'échelle nanométrique. Il a également reçu le prix "IEEE Sensors Council Technical Achievement Award" en 2016 pour son leadership dans le domaine émergent du co-design des interfaces Bio/Nano/CMOS. Il est un Professeur titulaire à l' EPFL à Lausanne (Suisse) et responsable du groupe de recherche "Bio/CMOS Interfaces" (BCI). Il est ancien professeur de biocapteurs optiques et électriques au Département de génie électrique et de biophysique (DIBE) de l'Université de Gênes (Italie) et ancien professeur de nanotechnologie à l'Université de Bologne (Italie). Il est titulaire d'un doctorat en biochimie et de biophysique de l'Université de Padoue (Italie), une master en physique de l'Université de Gênes (Italie), et un diplôme en électronique de l'Institut National de Technologie à Albenga (Italie). Ses intérêts scientifiques sont sur les phénomènes électriques de films nano-bio-structuré, et comprennent CMOS conception de biopuces à base de protéines et de l'ADN. Le long de sa carrière, il a publié 7 livres, l'un comme auteur avec Springer sur les interfaces Bio/CMOS et, plus récemment, un manuel de bioélectronique avec La prestigieuse Cambridge University Press. Il a également publié plus de 250 articles scientifiques et est l'auteur de 13 brevets. Il est maintenant chef rédacteur du Journal IEEE Sensors; il est également fondateur et chef rédacteur du Journal BioNanoScience par Springer, et rédacteur adjoint de IEEE Transactions on Circuits and Biomedical Systems. Il est membre du IEEE Sensors Council et de son comité exécutif. Il était membre du Conseil des gouverneurs de la IEEE Circuits And Systems Society (CASS). Il a été nommé IEEE conférencier émérite pour les années 2017-2019 pour le Conseil IEEE Sensors, et de la société CASS pour les années 2013-2014. Son travail a reçu plusieurs reconnaissances internationales: plusieurs Top-25 Hottest-articles (2004, 2005, 2008, 2009, et deux fois en 2012) publiés dans des journaux internationales très fort impact telles que Biosensors and Bioelectronics, Sensors And Actuators B, IEEE Sensors, et Thin Solid Films; un Award à une conference de l'OTAN en 1996 pour la contribution originale à la physique de la conductivité à électron unique dans les nano-particules; six "Best Paper Awards" pour des articles présentés à la conférence IEEE Sensors Conference en 2019 (Montreal), IEEE NGCAS en 2017 (Genoa), MOBIHEALTH en 2016 (Milan), IEEE PRIME en 2015 (Glasgow), en 2010 (Berlin) et en 2009 (Cork), un prix de la meilleure affiche au rencontre annuel de Nanotera en 2011 (Berne), et un prix de la meilleure affiche au NanoEurope Symposium en 2009 (Rapperswil). De 1997 à 2000, il a été membre d'un comité international au ELETTRA Synchrotron à Trieste. De 2000 à 2003, il était responsable scientifique d'un Programme national de recherche (PNR) dans le dépôt de nanobiotechnologie. Il était un expert internationalement estimé du comité d'évaluation de l'Académie de Finlande dans un programme de recherche pour les années 2010-2013. Il a été le président général (General Chair) de la Conférence IEEE BioCAS 2014, le premier conférence internationale dans le domaine des circuits et des systèmes pour les applications biomédicales.
Michel DeclercqMichel J. Declercq received the Electrical Engineering degree and the PhD degree from the Catholic University of Louvain, Belgium, in 1967 and 1971, respectively. In 1973, he was awarded a Senior Fulbright Fellowship, and joined Stanford University as a Research Associate in the Microelectronics Labs. From 1974 to 1978, he was Research Associate and lecturer at the Catholic University of Louvain, Belgium. In 1978, he joined the company Tractebel in Brussels, Belgium, where he was Group Leader of the Electronic Systems team.
In 1985, Dr. Declercq joined the Swiss Federal Institute of Technology (EPFL), Lausanne, Switzerland, where he is currently Professor, Dean of the School of Engineering, and Director of the Electronics Laboratory. His research activities are related to mixed analog-digital I.C. design and design methodologies. He is more particularly involved in low-power/low-voltage circuits, high-frequency circuits for telecommunications, MEMS and RF-MEMS, SOI technology and circuits, high-voltage circuits and Nano-electronics. He is author and co-author of more than 220 scientific publications and 3 books, and holds several patents.
He is a Fellow of the IEEE (Institute of Electrical and Electronic Engineers).
Professor Declercq is expert by the European Commission for the scientific research programs in Information Technologies.
Kyojin ChooProfessor Kyojin Choo received his B.S. and M.S. degree in electrical engineering from Seoul National University, Seoul, Korea, in 2007 and 2009, respectively. In 2018, he received his Ph.D. degree at the University of Michigan, Ann Arbor, MI, USA.
From 2009 to 2013, he was with Image Sensor Development Team of Samsung Electronics, Yong-In, Korea, where he designed signal readout chains for mobile/DSLR image sensors. From 2018 to 2021, he was with University of Michigan, Ann Arbor, MI, USA, as a Post-Doctoral Research Fellow, and he recently joined Swiss Federal Institute of Technology of Lausanne (EPFL), Switzerland, as an Assistant Professor. He holds more than 20 US patents and his research interests include charge-domain circuits, sensor interfaces, energy converters, high-speed links/timing generators, and millimeter-scale integrated systems.
Alexis BoegliDr Alexis Boegli holds a PhD from the University of Neuchâtel. Starting with a mechanical background, Alexis has a ten year experience in the design and implementation of analogue and digital electronic systems. Since 2001, he has focused on the design and implementation of RF systems. Alexis has designed several RF boards for IP01 including the actually commercialized one. Working as a post-doc project leader at IMT, he is challenged by the optimization of size, range, power and production of wireless systems. His position at the IMT Neuchâtel (University of Neuchâtel until 2008, EPFL Neuchâtel since 2009) provides access to a highly professional design environment and direct contacts to other research institutes such as the EPFL and the CSEM.
