Publications associées à Olivine

Mapping orthorhombic domains with geometrical phase analysis in rare-earth nickelate heterostructures

Duncan Thomas Lindsay Alexander, Bernat Mundet, Jean-Marc Triscone

Most perovskite oxides belong to the Pbnm space group, composed of an anisotropic unit cell, A-site antipolar displacements, and oxygen octahedral tilts. Mapping the orientation of the orthorhombic unit cell in epitaxial heterostructures that consist of at ...

Aip Publishing2024

Micromechanics of oxide inclusions in ferrous alloys

Alejandra Inés Slagter

Oxide inclusions are inevitably present in steel as a direct consequence of the steelmaking process; as a result, a cubic centimetre of modern steel will generally contain about a million of these hard and brittle micrometre-sized ceramic particles. Inclus ...

EPFL2023

New tools for phase segmentation and denoising of analytical STEM data for enhanced chemical sensitivity, applied to Earth mantle research

Hui Chen

This thesis is dedicated to developing innovative methodologies that improve elemental quantification in scanning transmission electron microscopy (STEM) using energy-dispersive X-ray spectroscopy (EDXS). The primary motivation stems from a geochemistry pr ...

EPFL2023

First-Principles Thermodynamics of CsSnI3

Nicola Marzari, Lorenzo Monacelli

CsSnI3 is a promising ecofriendly solution for energy harvesting technologies. It exists at room temperature in either a black perovskite polymorph or a yellow 1D double-chain, which irreversibly deteriorates in the air. In this work, we unveil the relativ ...

AMER CHEMICAL SOC2023

The role of Zn in C-S-H atomic structure, nucleation and growth

Anna Morales Melgares

The most promising solution towards cementitious materials with a lower carbon footprint is the partial substitution of the clinker by supplementary cementitious materials (SCMs) such as fly ash, blast furnace slag, limestone and calcined clays. The produc ...

EPFL2023

A method for the reliable and reproducible precipitation of phase pure high Ca/Si ratio (>1.5) synthetic calcium silicate hydrates (C-S-H)

Karen Scrivener, Paul Bowen, Maya Nicole Harris, Grace Simpson

Various methods have been developed to synthesize C-S-H; however, these methods have only allowed for the successful production of pure-phase C-S-H with Ca:Si of 1.5 or less. Attempts to form higher Ca:Si ratios by these methods gives C-S-H (Ca:Si 1.5 or l ...

Pergamon-Elsevier Science Ltd2022

Electron probing of oxygen-evolving oxide catalysts

Tzu-Hsien Shen

Water splitting is one of the cleanest ways to store energy. The production of hydrogen and oxygen gases can be utilized in fuel cells to generate electricity, power, and heat. In the water splitting process, the oxygen evolution reaction (OER), taking pla ...

EPFL2022

Neural Network Potentials for Age Hardening Aluminum Alloys

Daniel John Gilles Marchand

High-strength metal alloys achieve their performance via careful control of precipitates and solutes. The nucleation, growth, and kinetics of precipitation, and the resulting mechanical properties, are inherently atomic scale phenomena, particularly during ...

EPFL2022

Effect of alkali hydroxide on calcium silicate hydrate (C-S-H)

Karen Scrivener, Barbara Lothenbach, Yu Yan, Émilie Michèle L'Hôpital, Sheng-Yu Yang

This paper investigates the effect of KOH and NaOH on C-S-H structure and solubility. Both KOH and NaOH have a similar effect, they increase pH values and silicon concentrations, and decrease calcium concentrations. At higher alkali hydroxide concentration ...

Pergamon-Elsevier Science Ltd2022

In-line electronic and structural characterization of reactively sputtered Cu-Co-Mn black spinel oxides

Andreas Schueler, Anna Krammer, Maxime Lagier

Cu-Co-Mn spinel oxide thin films are deposited by reactive magnetron sputtering. The x-ray diffraction (XRD) spectrum suggests a nanocrystalline spinel film when sputtered at approximate to 465 degrees C. In-line scanning tunneling microscopy confirms nano ...

A V S AMER INST PHYSICS2021