Publications associées à Economizer

Incorporating Location Aspects in Process Integration Methodology

François Maréchal, Ivan Daniel Kantor, Hür Ebuzer Bütün

The large potential for waste resource and heat recovery in industry has been motivating research toward increasing efficiency. Process integration methods have proven to be effective tools in improving industrial sites while decreasing their resource and ...

2019

On the Influence of Thermal Mass and Natural Ventilation on Overheating Risk in Offices

Flourentzos Flourentzou, Thomas Bernard Paul Jusselme, Arianna Brambilla, Jérôme Philippe Bonvin

Free cooling strategies are gaining importance in design practice due to the increased risk of overheating in well-insulated buildings with high internal loads such as offices. The state of the art highlights that the most efficient passive solution for in ...

2018

Design, modeling and experimental validation of a novel finned reciprocating compressor for Isothermal Compressed Air Energy Storage applications

Alfred Rufer, Mahbod Heidari

Considering the need for a reliable and environmentally friendly energy storage solution for addressing renewable energy intermittency issue and following the developments on Isothermal Compressed Air Energy Storage (I-CAES) systems, a new finned piston co ...

Pergamon-Elsevier Science Ltd2017

Multi-objective optimization and exergoeconomic analysis of a combined cooling, heating and power based compressed air energy storage system

François Maréchal, Ligang Wang, Erren Yao

Compressed air energy storage technologies can improve the supply capacity and stability of the electric- ity grid, particularly when fluctuating renewable energies are massively connected. While incorporating the combined cooling, heating and power system ...

Elsevier2017

Local measurements and a new flow pattern based model for subcooled and saturated flow boiling heat transfer in multi-microchannel evaporators

John Richard Thome, Houxue Huang

A comprehensive experimental campaign has been conducted to measure the local heat transfer coefficients during flow boiling of refrigerants in multi-microchannel evaporators. Two additional refrigerants (R245fa and R236fa) were tested in two silicon evapo ...

Pergamon-Elsevier Science Ltd2016

Small-scale turbocompressors for wide-range operation with large tip-clearances for a two-stage heat pump concept

Jürg Alexander Schiffmann, Adeel Javed

Two mechanically driven small-scale turbocompressors running on gas lubricated bear-ings have been theoretically designed for a 6.5 kW two-stage heat pump functioning under variable operating conditions. The novelty in the heat pump system lies in the appl ...

Elsevier2016

Solar fuel processing efficiency for ceria redox cycling using alternative oxygen partial pressure reduction methods

Sophia Haussener, Meng Lin

Solar-driven non-stoichiometric thermochemical redox cycling of ceria for the conversion of solar energy into fuels shows promise in achieving high solar-to-fuel efficiency. This efficiency is significantly affected by the operating conditions, e.g. redox ...

Pergamon-Elsevier Science Ltd2015

Pore structure evolution of compacted granular bentonite during wetting and drying cycles

Lyesse Laloui, Alessio Ferrari, Ali Seiphoori

Deep geological repositories are considered as suitable solutions for the disposal of high level nuclear wastes. In several repository concepts (e.g. in Spain and Switzerland), bentonites are selected as the main component of the engineered barrier to be p ...

2014

Thermo-Electric Analogy Method for Computing Transient Heat Transfer in a New Reciprocating Finned Piston Compressor

John Richard Thome, Alfred Rufer, Mahbod Heidari

In the framework of Isothermal Compressed Air Energy Storage (CAES), a new finned piston compressor has been designed and realized at LEI laboratory in EPFL. This system comprises a series of concentric annuli’s fitting into each other compressing the air ...

2014

Pressure drop data and prediction method for enhanced external boiling tube bundles with R-134a and R-236fa

John Richard Thome, Eugene van Rooyen

The pressure drops of external flow over enhanced tube bundles were experimentally obtained at both adiabatic and diabatic conditions using R-134a and R-236fa as test fluids. The tests were carried out at saturation temperatures of 5 and 15 degrees C, mass ...

Elsevier2013