Publications associées à Conformal coating

High performance Fully-vertical GaN-on-Si power MOSFETs

Elison de Nazareth Matioli, Chao Liu, Reza Soleiman Zadeh Ardebili

We report the first demonstration of fully-vertical power MOSFETs on 6.6-μm-thick GaN grown on a 6-inch Si substrate by metal-organic chemical vapor deposition (MOCVD). A robust fabrication method was developed based on a selective and local removal of the ...

IEEE2019

Discontinuous Galerkin scheme for the spherical shallow water equations with applications to tsunami modeling and prediction

Jan Sickmann Hesthaven, Boris Bonev

We present a novel high-order discontinuous Galerkin discretization for the spherical shallow water equations, able to handle wetting/drying and non-conforming, curved meshes in a well-balanced manner. This requires a well-balanced discretization, that can ...

2018

Optimisation of industrial production of low-force sensors – adhesive bonding of force-centring ball

Peter Ryser, Thomas Maeder, Caroline Jacq, Maxime Blot

This work addresses the issue of attaching the force-centring part (a round ball) to the load cell of a force sensor, a piezoresistive thick-film Wheatstone bridge deposited onto a ceramic cantilever. As the current soldering process requires expensive met ...

IOP2015

Parylene C Coated Microelectrodes For Scanning Electrochemical Microscopy

Hubert Girault, Pekka Eero Peljo, Fernando Cortes Salazar, Haiqiang Deng, Carlos Manuel De Melo Pereira

Herein, we present a simple microelectrode preparation methodology consisting in coating a platinum wire or a carbon fiber with a thin insulating Parylene C film (e.g. 1–10 μm), to produce SECM probes with a small and constant probe RG (i.e. ratio between ...

Elsevier2013

Formation Mechanisms and Structural Properties of Aluminium-Chromium Based Oxynitride Thin Films Synthesized by Physical Vapor Deposition

Hossein Najafi

Oxynitride thin films, a novel class of mixed anionic solid structures, have gained an intense interest during recent years related to the unique interplay of oxygen (O) and nitrogen (N) with metals in the material structure. This matter can result in spec ...

EPFL2012

Numerical analysis of zeptogram/Hz-level mass responsivity for in-plane resonant nano-electro-mechanical sensors

Mihai Adrian Ionescu, Dimitrios Tsamados

This paper presents numerical analysis of an in-plane resonant nano-electro-mechanical (NEM) sensor based on mass-detection principle using a 3D FEM electromechanical simulation combined with a NEM/MOS hybrid circuit simulation. The self-assembled linker m ...

2011

Estimation of interfacial fracture toughness based on progressive edge delamination of a thin transparent coating on a polymer substrate

Yves Leterrier

Evaluation of interfacial toughness of sub-micron-thickness layers deposited on a ductile substrate is a challenging task which has motivated different experimental approaches Fragmentation testing was used in the present study as a means of interface char ...

Elsevier2010

Models for Saturation Damage State and Interfacial Shear Strengths in Multilayer Coatings

Yves Leterrier, Judith Helen Waller

The present work investigates the saturation damage state of a two-layer coating on a substrate (layer 1/layer 2/substrate) under uniaxial tensile loading in order to derive expressions for the interfacial strength between layer 1 and layer 2, and between ...

Elsevier2010

Texture Formation in Hot-Dip Galvanized Coatings : Nucleation and Growth of Anisotropic Grains in a Confined Geometry

Aurèle Mariaux

Continuous hot-dip galvanization is a process during which steel sheets are coated with a layer of Zn-Al alloy to protect them against corrosion. As the name indicates, this is achieved by dipping the preheated sheet into a bath of molten alloy. The sheet ...

EPFL2010

Protein Microarrays Based on Polymer Brushes Prepared via Surface-Initiated Atom Transfer Radical Polymerization

Harm-Anton Klok, Raphaël Barbey, Markus Ehrat

Polymer brushes represent an interesting platform for the development of high-capacity protein binding surfaces. Whereas the protein binding properties of polymer brushes have been investigated before, this manuscript evaluates the feasibility of poly(glyc ...

American Chemical Society2010