Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Semi-continuous direct-chill (DC) casting of aluminium ingots suffers from a very frequent defect which can lead to a strong decrease in productivity: hot tearing. This phenomenon takes place in the mushy state (i.e., at solid fractions, gs, lower than uni ...
The influence of the mould material on the build-up of internal stresses during autoclave cure of a unidirectional carbon fibre composite material was investigated using embedded optical fibre Bragg gratings. Four flat moulds (i.e. aluminium, steel, carbon ...
Recently electrically conducting SPM probes were used as read/write sensor of magneto-resistive nanopillars and ferroelectric domains in the development of >1 Tb/inch2 data storage. Since metal coated (platinum (Pt) or Pt/iridium) silicon (Si) probes are n ...
Recently electrically conducting SPM probes were used as read/write sensor of magneto-resistive nanopillars and ferroelectric domains in the development of >1 Tb/inch2 data storage. Since metal coated (platinum (Pt) or Pt/iridium) silicon (Si) probes are n ...
The rheological behavior of a solidifying alloy is modeled by considering the deforming material as a viscoplastic porous medium saturated with liquid. Since the solid grains in the mush do not form a fully cohesive skeleton, an internal variable that repr ...
This thesis explores the processing and properties of microcellular aluminium-based materials produced by replication. It includes the development of a pressure infiltration process for net-shape component production, structural characterization of the foa ...
In order to eliminate internal and surface defects, which appear in the ingots during continuous casting of metallic alloys, homogeneous and fine structures are often required. Therefore, when the adjunction of inoculant substances is not possible, the ele ...
Hot tearing is one of the most severe defects observed in castings, e.g. in billets or sheet ingots of aluminum alloys produced by DC casting. It is due to both tensile strains and a lack of interdendritic feeding in the mushy zone. In order to predict thi ...
We present the fabrication and characterization of hybrid SPM probes with full platinum (Pt) cantilever and tip for biological SPM experiments. In recent years, SPM has shown its value in imaging and characterizing biological samples. Classic SPM sensors f ...
The aims of the preliminary study reported in this document were twofold. Firstly, within the context of the application of UHPFRC for the rehabilitation of reinforced concrete structures, to identify the phenomena that require further study with respect t ...
