Publications associées à Électroplacage

Microstructure - Electrochemical Surface Reactivity Relationship of Electrochemically Grown Manganese Oxides Films

This Thesis provides a comprehensive and correlative investigation of the microstructure, chemical state, and electrochemical reactivity of manganese oxide (MnOx) films, aiming to gain a deeper understanding of the deposition and dissolution mechanism of M ...

EPFL2024

Artificial Hydrophilic Organic and Dendrite-Suppressed Inorganic Hybrid Solid Electrolyte Interface Layer for Highly Stable Zinc Anodes

Lei Zhang, Kangning Zhao

Aqueous zinc-ion batteries (AZIBs) have gained significant attentions for their inherent safety and cost-effectiveness. However, challenges, such as dendrite growth and anodic corrosion at the Zn anode, hinder their commercial viability. In this paper, an ...

Amer Chemical Soc2024

Size dependence of second-harmonic scattering from nanoparticles: Disentangling surface and electrostatic contributions

Sylvie Roke, Arianna Marchioro, Bingxin Chu

Polarimetric angle-resolved second-harmonic scattering (AR-SHS) is an all-optical tool enabling the study of unlabeled interfaces of nano-sized particles in an aqueous solution. As the second harmonic signal is modulated by interference between nonlinear c ...

AIP Publishing2023

Transparent Porous Conductive Substrates for Gas-Phase Photoelectrochemical Hydrogen Production

Kevin Sivula, Jun Ho Yum, Marina Caroline Michèle Caretti, Benjamin Goldman, Rebekah Anne Wells, Simon Nussbaum, Emeline Cécile Rideau, Loï Charles Carbone, Elizaveta Potapova Mensi, Linda Lazouni

Gas diffusion electrodes are essential components of common fuel and electrolysis cells but are typically made from graphitic carbon or metallic materials, which do not allow light transmittance and thus limit the development of gas-phase based photoelectr ...

Wiley-V C H Verlag Gmbh2023

Natural aging and vacancy trapping in Al-6xxx

William Curtin, Michele Ceriotti

Undesirable natural aging (NA) in Al-6xxx delays subsequent artificial aging (AA) but the size, composition, and evolution of clustering are challenging to measure. Here, atomistic details of early-stage clustering in Al-1% Mg-0.6%Si during NA are studied ...

Springer Heidelberg2023

Colloidal transport and deposition through dense vegetation

David Andrew Barry, Li Chen, Congrong Yu

The effectiveness of submerged synthetic aquatic vegetation on removal of colloids from flowing water was investigated to explore retention of particulate nonpoint source pollutants in aquatic systems. In colloid transport experiments, the deposition rate ...

Elsevier2022

Two-Dimensional Organic-Inorganic Heterostructure as a Multifunctional Protective Layer for High Performance Zinc Metal Anode

Kangning Zhao, Xu Zhang

Dendrite growth and side reactions of Zn metal anodes remain unresolved obstacles for practical application of aqueous Zn ion batteries. Herein, a two-dimensional (2D) organic-inorganic heterostructure with controlled thickness was constructed as a protect ...

AMER CHEMICAL SOC2023

A mixture model to take into account diluted gas in liquid flow: applications to aluminium electrolysis

Emile Tryphon Pierre Soutter

Aluminium is a metal sought in the industry because of its various physical properties. It is produced by an electrolysis reduction process in large cells. In these cells, a large electric current goes through the electrolytic bath and the liquid aluminium ...

EPFL2022

The Michelangelo step: removing scalloping and tapering effects in high aspect ratio through silicon vias

Edoardo Charbon, Sandro Carrara, Simone Frasca, Rebecca Camilla Leghziel

We present here, for the first time, a fabrication technique that allows manufacturing scallop free, non-tapered, high aspect ratio in through-silicon vias (TSVs) on silicon wafers. TSVs are among major technology players in modern high-volume manufacturin ...

Nature Research2021

Stainless steel-like FeCrNi nanostructures via electrodeposition into AAO templates using a mixed-solvent Cr(III)-based electrolyte

Enrico Bertero

Electrodeposition of stainless steel-like materials such as FeCrNi alloy into micro- and nanotemplates provides a sustainable framework for creating biomedical-oriented micro- and nanocomponents with outstanding characteristics. While Cr(III)-based electro ...

2020