Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The anaerobic degradation potential at a chloroethene-contaminated site was investigated by operating two anoxic column aquifer microcosms enriched in iron(III). One column was fed with vinyl chloride (VC) only (column A) and one with acetate in addition ( ...
Hydrogels are cross-linked, water-swollen polymer networks that are widely used as a biomaterial. Because of high amount of water, they are mechanically poor and soft. This aspect limits their applications. The suitability of hydrogels as biomedical materi ...
Petroleum-based polymers and composites are commonly used in a wide variety of application fields. However ecological concerns, increasing oil prices and dwindling natural resources explain why nowadays industrial and public interest is more than ever focu ...
An important issue in chlorine drinking water disinfection is the generation from natural organic matter (NOM) of disinfection by-products (DBPs), especially trihalomethanes (THMs). The THMs generation can be limited by reducing the levels of NOM prior to ...
A process for producing a metal article containing at least 10% interconnected porosity, using a preform (11), comprising: mixing an organic binder, a wetting agent and a granular material, to obtain a mouldable paste that combines 10 vol. pct. or more of ...
In the aquatic environment and in engineered water treatment systems, organic contaminants can undergo oxidative and photochemical transformations. For an overall risk assessment, the toxicity of the resulting transformation products has to be investigated ...
The optimization of powders preparation and consolidation process leads to the achievement of a high thermoelectric figure of merit (ZT=1.25 at 800°C) in an n-type silicon-germanium (SiGe) alloy hot pressed at low heating rate. It has been experimentally o ...
Dry, compression molded films of medical grade poly-L-lactide (PLLA) showed a marked reduction in tensile strength and strain after accelerated ageing in aqueous NaOH at 50 degrees C. accompanied by mass loss, surface erosion, increased hydrophilicity and, ...
Several enrichment cultures were investigated in our laboratory for the bioremediation potential of tetrachloroethene (PCE). The underlying process, organohalide respiration (OHR), is based on bacterial anaerobic respiration in which the chlorinated compou ...
HEMA hydrogels are hydrophobic biocompatible hydrogel with high mechanical and viscoelastic properties, which are widely used in biomedical application including drug delivery systems. The mechanical properties and permeability of these hydrogels can be tu ...