Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Constitutive models for fiber-reinforced ceramic-matrix composites (CMCs) are needed to enable implementation of these materials in future engineering systems. One such constitutive model, developed by Genin and Hutchinson [1], is based on a phenomenologic ...
Self-healing materials are a novel class of materials able to repair structural or, more generally, functional damage to a part. They hence have the potential to improve reliability and cost effectiveness, because failure or loss of functionality may be po ...
We study mechanical reinforcement in a widely used epoxy matrix with the addition of graphene nanoplatelets (GnPs) and various mixture ratios of carbon nanotubes (CNTs) with GnPs. Two different dimensions of GnPs were used with flake sizes of 5 mu m and 25 ...
Depending on the materials and processing parameters, composite materials consisting of an insulating matrix and a conductive filler may be electrically insulating, resistive or conducting. Previously, we had manufactured composites consisting of a resin a ...
Vysoké učení technické v Brně (VUT-Br), Antonínská 548/12013
Solvent healing of thermoset polymer matrices was suggested as an efficient and cost-effective alternative to other encapsulated self-healing systems. However, self-healing efficiency is not guaranteed over time. We report here on the autonomic self-healin ...
We have characterized the electrical conductivity of the composite which consists of multi-walled carbon nanotubes dispersed in SU8 epoxy resin. Depending on the processing conditions of the epoxy (ranging from non-polymerized to cross-linked), we obtained ...
In this paper, a combined experimental-numerical based work was undertaken to investigate the Bragg wavelength shift response of an embedded FBG sensor when subjected to different conditions of multi-axial loading (deformation). The following cases are exa ...
Toughness in Ceramic Matrix Composites (CMCs) is achieved if crack deflection can occur at the fiber/matrix interface, preventing crack penetration into the fiber and enabling energy-dissipating fiber pullout. To investigate toughening in nanoscale CMCs, d ...
Fatigue life prediction of wind turbine rotor blades is a very challenging task, as blade failure is led by different failure types that act synergistically. Inherent defects like wrinkles, fiber misalignments and voids, that can be introduced during fabri ...
In this study (0-3) P(VDF-TrFE)/BaTiO3 composites containing up to 60 vol% of ceramic phase were prepared by solvent casting or compression molding. Their thermomechanical, dielectric, and piezoelectric properties were investigated, and discussed in the li ...