Résumé
A current mirror is a circuit designed to copy a current through one active device by controlling the current in another active device of a circuit, keeping the output current constant regardless of loading. The current being "copied" can be, and sometimes is, a varying signal current. Conceptually, an ideal current mirror is simply an ideal inverting current amplifier that reverses the current direction as well. Or it can consist of a current-controlled current source (CCCS). The current mirror is used to provide bias currents and active loads to circuits. It can also be used to model a more realistic current source (since ideal current sources don't exist). The circuit topology covered here is one that appears in many monolithic ICs. It is a Widlar mirror without an emitter degeneration resistor in the follower (output) transistor. This topology can only be done in an IC, as the matching has to be extremely close and cannot be achieved with discretes. Another topology is the Wilson current mirror. The Wilson mirror solves the Early effect voltage problem in this design. Current mirrors are applied in both analog and mixed VLSI circuits. There are three main specifications that characterize a current mirror. The first is the transfer ratio (in the case of a current amplifier) or the output current magnitude (in the case of a constant current source CCS). The second is its AC output resistance, which determines how much the output current varies with the voltage applied to the mirror. The third specification is the minimum voltage drop across the output part of the mirror necessary to make it work properly. This minimum voltage is dictated by the need to keep the output transistor of the mirror in active mode. The range of voltages where the mirror works is called the compliance range and the voltage marking the boundary between good and bad behavior is called the compliance voltage. There are also a number of secondary performance issues with mirrors, for example, temperature stability.
À propos de ce résultat
Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.
Personnes associées (1)
Cours associés (23)
EE-320: IC design I
Introduction to the design of analog CMOS integrated circuits at the transistor level. Understanding and design of basic structures.
EE-381: Electronics III
Comparaison entre les systèmes à composants discrets et les systèmes intégrés. Introduction aux systèmes électroniques numériques et analogiques et à leur interfaçage. Analyse sous forme d'un projet
EE-203: Electronics II
Ce cours introduit les composants à semiconducteurs électroniques de base : diodes à jonction PN, transistors bipolaires et MOS. Leurs modes de fonctionnement en DC et AC sont étudiés. Les circuits
Afficher plus
Séances de cours associées (157)
Assemblage commun de l'émetteur : Configurations EC, BC, CC
Couvre les configurations communes d'assemblage de l'émetteur et l'analyse de petits signaux.
Cascode plié OTA: analyse de signal de grande taille
Couvre l'analyse du grand signal d'un circuit Cascode plié en OTA.
Abonné à la source : tampon de tension
Explore l'étape de suivi de la source comme tampon de tension et discute de ses inconvénients et de l'étape de la porte commune pour le transfert de tension.
Afficher plus