Hannes BleulerOriginaire de Zollikon (ZH), Hannes Bleuler est né en 1954 au Maroc où il passa son enfance. Après la maturité latine a Zürich, il entre au Département d'électricité à l'ETHZ. Il obtient son diplôme en automatique, en 1978, et entre en fonction comme assistant à l'Institut de mécanique de la même école.
Il y participe à l'établissement du groupe de mécatronique et obtient son doctorat dans le domaine des paliers magnétiques actifs, activité qui mène à la fondation d'une compagnie avec des collègues et à un premier séjour de deux ans chez Hitachi au Japon.
De 1991 à 1995, il est d'abord Toshiba Professor of Intelligent Mechatronics à l'institut des sciences industrielles de l'Université de Tokyo et ensuite professeur associé régulier au département de microtechnique à cette même université.
Il y travaille en microtechnique (instrumentation) et robotique. A l'EPFL, ses activités se concentrent sur la robotique biomédicale et l'interface homme-machine (interfaces haptiques) et l'entraînement et la simulation de chirurgie. Il est directeur de la section microtechnique 2008-2009. Il anime les relations et les échanges entre l'EPFL et le Japon sur tous les niveaux et donne un cours (2010) sur l'histoire des sciences au Japon dans le cadre du Collège des Humanités.
Alireza KarimiAlireza Karimi received his B. Sc. and M. Sc. degrees in Electrical Engineering in 1987 and 1990, respectively, from Amir Kabir University (Tehran Polytechnic). Then he received his DEA and Ph. D. degrees both on Automatic Control from Institut National Polytechnique de Grenoble (INPG) in 1994 and 1997, respectively. He was Assistant Professor at Electrical Engineering Department of Sharif University of Technology in Teheran from 1998 to 2000. Then he joined Automatic Laboratory of Swiss Federal Institute of Technology at Lausanne, Switzerland. He is currently Professor of Automatic Control and the head of "Data-Driven Modelling and Control" group. His research interests include data-driven controller tuning and robust control with application to mechatronic systems and electrical grids.
Nava SetterNava Setter completed MSc in Civil Engineering in the Technion (Israel) and PhD in Solid State Science in Penn. State University (USA) (1980). After post-doctoral work at the Universities of Oxford (UK) and Geneva (Switzerland), she joined an R&D institute in Haifa (Israel) where she became the head of the Electronic Ceramics Lab (1988). She began her affiliation with EPFL in 1989 as the Director of the Ceramics Laboratory, becoming Full Professor of Materials Science and Engineering in 1992. She had been Head of the Materials Department in the past and more recently has served as the Director of the Doctoral School for Materials.
Research at the Ceramics Laboratory, which Nava Setter directs, concerns the science and technology of functional ceramics focusing on piezoelectric and related materials: ferroelectrics, dielectrics, pyroelectrics and also ferromagnetics. The work includes fundamental and applied research and covers the various scales from the atoms to the final devices. Emphasis is given to micro- and nano-fabrication technology with ceramics and coupled theoretical and experimental studies of the functioning of ferroelectrics.
Her own research interests include ferroelectrics and piezoelectrics: in particular the effects of interfaces, finite-size and domain-wall phenomena, as well as structure-property relations and the pursuit of new applications. The leading thread in her work over the years has been the demonstration of how basic or fundamental concepts in materials - particularly ferroelectrics - can be utilized in a new way and/or in new types of devices. She has published over 450 scientific and technical papers.
Nava Setter is a Fellow of the Swiss Academy of Technical Sciences, the Institute of Electrical and Electronic Engineers (IEEE), and the World Academy of Ceramics. Among the awards she received are the Swiss-Korea Research Award, the ISIF outstanding achievement award, and the Ferroelectrics-IEEE recognition award. In 2010 her research was recognized by the European Union by the award of an ERC Advanced Investigator Grant. Recently she received the IEEE-UFFC Achievement Award (2011),the W.R. Buessem Award(2011), the Robert S. Sosman Award Lecture (American Ceramics Society) (2013), and the American Vacuum Society Recognition for Excellence in Leadership (2013).
Jürg Alexander SchiffmannAfter obtaining his diploma in mechanical engineering from EPFL in 1999 he co-founded a start-up company dedicated to the design of gas bearing supported rotors. In 2005 he joined Fischer Engineering Solutions where he led the development of small-scale, gas bearing supported high-speed turbomachinery for fuel cell air supplies and for domestic scale heat pumps. In parallel he worked on his PhD, which he obtained from EPFL in 2008 and for which he was awarded the SwissElectric Research Award. He then joined the Gas Turbine Lab at MIT as a postdoctoral associate where he worked on foil bearings and on the experimental investigation of radial diffusers. In 2013 he was nominated assistant professor at the Ecole Polytechnique Fédérale de Lausanne where he founds the Laboratory for Applied Mechanical Design. His current research interest are in gas lubricated bearings, in aerodynamics of small-scale compressors and turbines and in automated design and optimization methodologies.
Daniel FavratDaniel Favrat a obtenu à l'EPFL son diplôme d'ingénieur mécanicien en 1972 et le titre de docteur ès sciences techniques en 1976.
Il passe ensuite 12 ans dans des centres de recherche industriels au Canada et en Suisse.Depuis 1988, D. Favrat est professeur et directeur du Laboratoire d'énergétique industrielle à l'EPFL. Il est aussi successivement directeur de l'Institut des Sciences de l'énergie et, dès janvier 2007, de l'Institut de Génie Mécanique. Ses recherches portent sur les analyses systémiques prenant en compte l'énergétique, l'environnement et l'économie (optimisation environomique), et les systèmes avancés pour une utilisation plus rationnelle de l'énergie (pompes à chaleur, moteurs, piles à combustible,turbomachines etc.)
Il est membre de l'Académie Suisse des Sciences Techniques et vice-président du comité énergie de la Fédération Mondiale des Organisations d'Ingénieurs. Il est éditeur associé du journal "Energy" et l'auteur de deux livres sur la thermodynamique et l'énergétique publiés aux Presses Polytechniques Universitaires Romandes.
Roland LongchampRoland Longchamp is Professor of Automatic Control and Director of the Automatic Control Laboratory at the Swiss Federal Institute of Technology in Lausanne (EPFL). He received his Diploma in Electrical Engineering and his Ph.D. degree both from EPFL. He was appointed as Postdoctoral Fellow, first at the Information Systems Laboratory, Stanford University, and then at the Decision and Control Laboratory, University of Illinois at Urbana-Champaign, working in the areas of nonlinear systems, estimation theory and predictive control. He was with the Asea Brown Boveri Company in Turgi, Switzerland, involved in the field of on-line control of large power systems. He joined EPFL in 1983, where his current research interests include control of linear systems, adaptive control, robust control, with applications to mechatronic systems. He served as Head of the Mechanical Engineering Department in 1991-1993 and as Director of the Automatic Control Laboratory for the periods 1986-1993 and 1997-2003. He is Editor of the EPFL Press Mechanical Engineering Series since 1996.
