Publications associées à Sulfate de calcium

Contradict mechanism of long-term magnesium and sodium sulfate attacks of nano silica-modified cement mortars - Experimental and thermodynamic modeling

The mechanisms of external sulfate attack on cement mortars containing nano silica have been studied under full immersion conditions after 3 years. The sulfate degradation processes were compared between sodium sulfate and magnesium sulfate solutions with ...

Elsevier Sci Ltd2024

Atomistic modeling of C-S-H: bulk and surface

Ziga Casar

By replacing part of Portland cement with so-called supplementary cementitious materials (SCMs) it is possible to reduce the CO2 footprint of the cement industry. These SCMs are commonly limestone, calcined clay, slag and fly ash. While doing so the early ...

EPFL2023

Atomic-Level and Surface Structure of Calcium Silicate Hydrate Nanofoils

Karen Scrivener, Paul Bowen, Aslam Kunhi Mohamed, Ziga Casar

Deciphering the calcium silicate hydrate (C-S-H) surface is crucial for unraveling the mechanisms of cement hydration and property development. Experimental observations of C-S-H in cement systems suggest a surface termination which is fundamentally differ ...

AMER CHEMICAL SOC2023

The role of Zn in C-S-H atomic structure, nucleation and growth

Anna Morales Melgares

The most promising solution towards cementitious materials with a lower carbon footprint is the partial substitution of the clinker by supplementary cementitious materials (SCMs) such as fly ash, blast furnace slag, limestone and calcined clays. The produc ...

EPFL2023

Hydration and mixture design of calcined clay blended cements: review by the RILEM TC 282-CCL

Karen Scrivener, Franco Alberto Zunino Sommariva, Mohsen Ben Haha, François Henri Avet, Anuj Parashar, Yuvaraj Dhandapani, Sreejith Krishnan

The RILEM technical committee 282-CCL: Calcined Clays as Supplementary Cementitious Materials, investigates all the aspects related to calcined clays, from clay exploration and characterization to calcination process, hydration reactions and concrete prope ...

SPRINGER2022

Active lithoautotrophic and methane-oxidizing microbial community in an anoxic, sub-zero, and hypersaline High Arctic spring

Ianina Altshuler

Lost Hammer Spring, located in the High Arctic of Nunavut, Canada, is one of the coldest and saltiest terrestrial springs discovered to date. It perennially discharges anoxic (

2022

Hydration and durability of fast hardening binders incorporating supplementary cementitious materials

Sarra El Housseini

The use of supplementary cementitious materials (SCMs) is widely considered the most promis-ing approach to reduce CO2 emissions relative to cement production. SCMs are not commonly present in binders used for special applications. On the other hand, due t ...

EPFL2022

Effect of alkali, aluminium and equilibration time on calcium-silicate-hydrates

Yu Yan

Calcium silicate hydrate (C-S-H) is the main hydration product in Portland and blended cements, and greatly affects durability and mechanical properties of the hydrated cement. In the presence of Al-rich supplementary cementitious materials (SCMs), C-(A-)S ...

EPFL2022

Strength-promoting mechanism of alkanolamines on limestone-calcined clay cement and the role of sulfate

Karen Scrivener, François Henri Avet, Xuerun Li, Wilasinee Hanpongpun, Hong Huang

This paper reports the strength-promoting mechanism of alkanolamines on limestone-calcined clay cement (LC3). The hydration kinetics, phase formation and microstructure of LC3 with triethanolamine (TEA) or triisopropanolamine (TIPA) were investigated. TEA ...

Pergamon-Elsevier Science Ltd2021

The effect of alkali hydroxides and equilibration time on Al uptake by calcium silicate hydrates (C-S-H)

Sonya Barzgar

Cement production accounts for approximately 8% of man-made CO2 emissions. Lowering these CO2 emissions is currently one of the most important and urgent research topics within the cement community. To reduce these emissions, the Portland cement (PC) is pa ...

EPFL2021