Publications associées à Halftoning

Printed degradable piezoelectric microsystems: From ink formulation to device fabrication and characterization

As the world moves further and further into the semiconductor era, the amount of waste generated from electronics ("e-waste") is increasing rapidly and unsustainably. Of particular note, alternatives to lead-based piezoelectric materials must be establishe ...

EPFL2023

Electrode Impact on the Electrical Breakdown of Dielectric Elastomer Thin Films

Herbert Shea, Fabio Beco Albuquerque

Dielectric Elastomer Actuators (DEAs) enable the realization of energy-efficient and compact actuator systems. DEAs operate at the kilovolt range with typically microampere-level currents and hence minimize thermal losses in comparison to low voltage/high ...

MDPI2023

All-Printed Electrocorticography Array for In Vivo Neural Recordings

Diego Ghezzi, Eleonora Borda, Laura Ferlauto, Fabian Michael Lütolf, Nenad Marjanovic

Bioelectronic and neuroprosthetic interfaces rely on implanted microelectrode arrays (MEAs) to interact with the human body. Printing techniques, such as inkjet and screen printing, are attractive methods for the manufacturing of MEAs because they allow fl ...

2020

Angular Color Prediction Model for Anisotropic Halftone Prints on a Metallic Substrate

Roger Hersch, Lin Yang, Petar Pjanic

Under specular reflection, non-isotropic halftones such as line halftones printed on an ink-receiving plastic layer superposed with a metallic layer change their colors upon in-plane rotation of the print. This color change is due to the orientation-depend ...

I S & T-SOC IMAGING SCIENCE TECHNOLOGY2019

Color changing effects with cross-halftone prints

Roger Hersch, Petar Pjanic

We propose new methods for creating color varying prints with classical cyan, magenta, yellow inks on a metallic specularly reflecting or on a white diffusely reflecting substrate. We use a special cross-line halftone with optimized surface coverages of th ...

2017

Microfluidic Platform for Seawater Desalination by Coulometric Removal of Chloride Ions through Printed Ag Electrodes

Herbert Shea, Peter Van der Wal, Marianna Fighera

This paper reports on the electrochemical characterization and comparison of printable silver inks for the fabrication of planar electrodes to integrate in a microfluidic platform for in situ desalination of seawater prior to detection of nutrients in mari ...

Electrochemical Soc Inc2017

Color changing effects with cross-halftone prints on metal

Roger Hersch, Petar Pjanic

We propose new methods for creating color varying prints with classical cyan, magenta, yellow inks on a metallic substrate. We use a special crossline halftone with optimized surface coverages of the inks to create color prints on a metallic surface whose ...

2017

Color Changing Prints on a Metallic Substrate

Petar Pjanic

Printing on a flat metallic substrate has gained popularity in recent years. The reflection of light on a specularly reflecting metallic substrate differs strongly from the reflection of light on a diffusely reflecting medium such as paper. Direct prints o ...

EPFL2016

Color reproduction, pattern hiding and image alternations with halftone prints on metal

Roger Hersch, Petar Pjanic

We propose new methods for creating color or achromatic images that are printed with classical cyan, magenta, yellow and a white diffusing ink on a metallic substrate. We optimize the surface coverages of the cyan, magenta, yellow and white inks in order t ...

2016

Color Reproduction with Juxtaposed Halftoning

Vahid Babaei

Recently, non-standard inks have begun to make their way into the world of printing. Non-standard inks are printing materials which exhibit unusual effects such as angular color dependence, texture, or fluorescence. They are made of special-effect pigments ...

EPFL2015