Publications associées à Acier au carbone

FLO:RE – A new floor system made of reused reinforced concrete and steel elements

Corentin Jean Dominique Fivet, Numa Joy Bertola, Maléna Bastien Masse, Célia Marine Küpfer

Carefully extracting reinforced concrete (RC) elements from soon-to-be demolished structures and reusing them as load-bearing components is an emerging circular low-carbon alternative to building new structures. As floor construction typically accounts for ...

IABSE2024

Evaluation of Interface and Residual Strain of NiTi Layer Deposited on NiTiX Substrate by Laser Powder Bed Fusion

Christian Leinenbach, Elyas Ghafoori, Irene Ferretto, Mahbod Golrang, Mahshid Memarian

This study investigates the microstructure and properties of functionally graded NiTi alloy bilayers. The NiTi layer is printed by laser powder bed fusion on a NiTiX (where X is Hf or Cu) substrate prepared by vacuum arc remelting. Specimens produced with ...

Wiley-V C H Verlag Gmbh2024

Stabilization versus competing de-metalation, trans-metalation and (cyclo)-dehydrogenation of Pd porphyrins at a copper surface

Metal-porphyrins are studied intensively due their potential applications, deriving from the variety of electronic and chemical properties, tunable by selecting metal centers and functional groups. Metalation, de- and trans-metalation processes are fundame ...

Royal Soc Chemistry2024

Global emergent responses of stream microbial metabolism to glacier shrinkage

Tom Ian Battin, Hannes Markus Peter, Massimo Bourquin, Nicola Deluigi, Tyler Joe Kohler, Michail Styllas

Most cryospheric ecosystems are energy limited. How their energetics will respond to climate change remains largely unknown. This is particularly true for glacier-fed streams, which interface with the cryosphere and initiate some of Earth's largest river s ...

Nature Portfolio2024

The new Chapter 9 of Eurocode 8 Part 3 for Seismic Assessment of Existing Steel Structures

Dimitrios Lignos

The seismic assessment of existing steel structures necessitates the development of practice- oriented engineering models for use in nonlinear static and dynamic analysis procedures. These models should encompass the full range of the anticipated nonlinear ...

2023

Proposed Limits of Stiffener Spacing Requirements for EBF Links Within the Framework of Eurocode 8

Dimitrios Lignos, Nikolaos Skretas

Design specifications for Eccentrically Braced Frames (EBFs) provided by both the current AISC and Eurocode (EC) 8 seismic provisions are primarily based on physical tests conducted in the early 1980s. The tests investigated the behavior of, mostly short, ...

EEME2023

Natural aging and vacancy trapping in Al-6xxx

William Curtin, Michele Ceriotti

Undesirable natural aging (NA) in Al-6xxx delays subsequent artificial aging (AA) but the size, composition, and evolution of clustering are challenging to measure. Here, atomistic details of early-stage clustering in Al-1% Mg-0.6%Si during NA are studied ...

Springer Heidelberg2023

Hydro-mechanichal characterisation of bentonite/steel interfaces

Alessio Ferrari, Eleni Stavropoulou, Fabiana Sannasardo

The hydromechanical response of a Wyoming-type bentonite (MX-80) and its interface with steel was studied in terms of shear resistance under different hydration levels. A series of shear tests under constant normal stress were performed in total suction co ...

2023

Understanding the role of surface oxygen-containing functional groups on carbon-supported cobalt catalysts for the oxygen evolution reaction

Andreas Züttel, Thi Ha My Pham, Kangning Zhao, Youngdon Ko, Liping Zhong, Manhui Wei

Supported Co-based catalysts exhibit promising catalytic activities in the oxygen evolution reaction (OER) during alkaline water electrolysis. Surface functionalization of the support modulates the dispersion of the catalysts and their interaction with the ...

Royal Society of Chemistry2023

Room-temperature strength of the interfacial bond between silica inclusions and iron

Andreas Mortensen, Alejandra Inés Slagter, David Hernandez Escobar, Sergio Perosanz Amarillo

The strength of the interface between iron (Fe) and individual spherical silica (SiO2) inclusions of 5 +/- 1 mu m diameter is measured by means of in-situ micro-cantilever bending tests conducted under displacement control within a scanning electron micros ...

Pergamon-Elsevier Science Ltd2023