Concept

Acier à outils

Publications associées (82)

Design of Pressure Relief Valves for Protection of Steel-Lined Pressure Shafts and Tunnels Against Buckling During Emptying

Anton Schleiss, Pedro Filipe De Almeida Manso

Using high-strength steels for pressure shafts and tunnel liners and taking into account significant rock mass participation allows the design of comparatively thin steel liners in hydropower projects. Nevertheless, during emptying of waterways, these stee ...

Springer Verlag2012

Thermo-mechanical modeling of dendrite deformation in continuous casting of steel

Jean-Marie Drezet, Andreas Ludwig

In the field of modern steelmaking, continuous casting has become the major manufacturing process to handle a wide range of steel grades. An important criterion characterizing the quality of semi-finished cast products is the macrosegregation forming at th ...

2012

An analysis of the tensile elongation to failure of laminated metal composites in the presence of strain-rate hardening

Andreas Mortensen, Arda Cetin, Cécile Bernardi

We extend the analysis of Hutchinson and Neale (Hutchinson JW, Neale KW. Acta Metall 1977;25:839) and Ghosh (Ghosh AK. Acta Metall 1977;25:1413) predicting the tensile elongation to failure of strain-rate-dependent plastic materials to two-phase composites ...

Elsevier2012

Microstructure and mechanical properties of an ODS RAF steel fabricated by hot extrusion or hot isostatic pressing

Nadine Baluc, Zbigniew Oksiuta

Ingots of an oxide dispersion strengthened reduced activation ferritic steel with the Fe-14Cr-2W-0.3Ti-0.3Y(2)O(3) chemical composition (in wt.%) were synthesized by mechanical alloying of elemental powders with 0.3 wt.% Y2O3 particles in a planetary ball ...

2011

On Potential Application of Coated Ferritic Stainless Steel Grades K41X and K44X in SOFC/HTE Interconnects

Jan Van Herle, Aïcha Hessler-Wyser

K41X is a ferritic stainless steel grade which was successfully developed in exhaust gas manifold where the temperature could reach 950°C. It contains about 18% wt of chromium and it is stabilized with both titanium and niobium to warranty a good weldabili ...

2011

Helium-induced hardening effect in ferritic/martensitic steels F82H and Optimax-A irradiated in a mixed spectrum of high energy protons and spallation neutrons

Yong Dai

Ferritic/martensitic (FM) steels, F82H and Optimax-A, were irradiated up to 11.3 dpa/1175 appm He in Target-3 of the Swiss Spallation Neutron Source (SINQ). To investigate helium-induced hardening effect, micro-hardness and microstructure of the irradiated ...

Elsevier2011

Crystallographic analysis of martensite in 0.2C-2.0Mn-1.5Si-0.6Cr steel using EBSD

Cyril Cayron

The crystallography of martensite formed in 0.2C-2.0Mn-1.5Si-0.6Cr steel was studied using the electron backscattered diffraction (EBSD) technique. The results showed that the observed orientation relationship (OR) was closer to that of Nishiyama-Wasserman ...

2011

Crystallographic analysis of martensite in 0.2C-2.0Mn-1.5Si-0.6Cr steel by EBSD

Cyril Cayron

The crystallography of martensite formed in 0.2C-2.0Mn-1.5Si-0.6Cr steel was studied using the EBSD technique. The results showed that the observed orientation relationship was closer to the Nishiyama- Wassermann (N-W) than to the Kurdjumov-Sachs (K-S) ori ...

2011

Laminated Metal Composites by Infiltration

Andreas Mortensen, Andreas Rossoll, Jérôme Krebs, Arda Cetin, Alexandre Durussel

We show that steel-magnesium alloy laminated metal composites (LMCs) can be produced by gas pressure infiltration of a liquid magnesium alloy between layers of stacked dimpled steel sheets. Resulting LMCs are amenable to subsequent warm rolling. The LMCs a ...

Springer US2011

Low-Cost Molybdenum Carbide and Tungsten Carbide Counter Electrodes for Dye-Sensitized Solar Cells

Ulf Anders Hagfeldt

Carbide-based catalysts, MoC and WC embedded in ordered nanomesoporous carbon were developed for the redn. of triiodide in DSSCs. CV, EIS, Tafel polarization, and photocurrent/voltage tests confirm the excellent catalytic activity of the synthesized carbid ...

2011

Graph Chatbot

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.

Connectez-vous pour utiliser Chat avec Graph Search