Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Improvement of the spatial resolution of the TCV Thomson scattering system has permitted measurements of the pedestal height and gradient of electron density and temperature profiles near; the plasma boundary during ELMy H-mode. Measured profiles were fitt ...
Results are presented for heat loads at the TCV outer divertor target during ELMing H-mode using a fast IR camera. Benefitting from a recent surface cleaning of the entire first wall graphite armour, a comparison of the transient thermal response of freshl ...
This report summarizes Type I edge localized mode (ELM) dynamics measurements from a number of tokamaks, including ASDEX-Upgrade, DIII-D, JET, JT-60U and MAST, with the goal of providing guidance and insight for the development of ELM simulation and modell ...
In this paper, two simplified models of edge localized mode (ELM) power exhaust are developed, one based on the kinetic and the other on the fluid treatment of parallel losses. These models are found to capture many (though not all) of the salient features ...
Analysis of the type-l ELM power load asymmetries using infra-red thermography and target current measurements is performed ASDEX Upgrade Upper Single Null and JET DOC-L type-I ELMy H-Mode discharges with 'normal' and,reversed' field direction, i.e. with t ...
This contribution summarizes a number of aspects of the experimental and modelling programme at JET aimed at improving the characterization and understanding of edge localized mode (ELM) transport in the scrape-off layer (SOL). Divertor target energy depos ...
Ohmic H-mode discharges in the Tokamak Configuration Variable (TCV) have recently been heated for the first time by electron cyclotron (EC) waves at the 3rd harmonic (X3) at full power. New edge localized mode (ELM) behaviour has been found, with larger am ...
For the ITER project it is clear that steps have to be taken in order to avoid or mitigate type-I ELMs when operating in the standard H-mode scenario. Otherwise, divertor power loads induced by intrinsic ELMs will result in an intolerably short divertor li ...
Although ohmic H-modes have long been produced on the TCV tokamak and the effects of ELMs at the divertor targets studied in some detail [1], no attempt has yet been made to model the scrape-off layer (SOL) in these plasmas. This contribution describes det ...
Using infra-red (IR) thermography, power loads onto the MKII Gas-Box divertor targets have been investigated in Type-I ELMy H-Mode plasmas at JET in medium current discharges (I-p = 2.6MA and B-T = 2.7 T). Heat fluxes are calculated from the measured diver ...