Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Maintaining a fuel cell (FC) system in correct operating conditions when subjected to fast load changes requires good system control. The best results are typically achieved using model-based control strategies. This paper elaborates a control-oriented pro ...
Micro-fabricated solid oxide fuel cells (µSOFCs) are finding an increasing interest as potential power sources for portable devices such as MP3 players or laptops. The aim of this work was to fabricate a µSOFC demonstrator that works at 500°C and is fuelle ...
Maintaining a fuel cell system in correct operating conditions when subjected to fast load changes requires good system control. Best results are typically achieved using model based control strategies. This paper elaborates a control oriented PEM fuel cel ...
In the production of acetate by Clostridium thermolacticum growing on lactose, considerable amounts of hydrogen were generated. Lactose available in large amounts from milk permeate, a wastestream of the dairy industry, appears to be a valuable substrate f ...
Progress on anode supported cell stacks (SOFCONNEX design, 50 m2 per cell) is presented. A 6-cell stack and a 8 cell-stack were mounted and tested with hydrogen fuel at 800 degre C, yielding 100 W el and 140 W el, corresponding to a power density of 1kW el ...
Polymer electrolyte and solid oxide are the two fuel cell types (PEFC, SOFC) under development in Switzerland. The very distinct operating temperatures of 80 °C (PEFC) and 800–950 °C (SOFC) impose fundamentally different requirements upon the nature of the ...
2004
, , , ,
In this project we develop hydrogen sensors based on nanoscaled discontinuities (nanogaps) in palladium (Pb). These nanogaps reversibly close and open upon hydrogen/air cycling due to an increased lattice constant in the hydrated state. Therewith, an elect ...
2008
, ,
The use of formic acid as a hydrogen-storage material has become more feasible thanks to the development of a homogeneous catalytic system of ruthenium water-soluble complexes (Ru/TPPTS; TPPTS=meta-trisulfonated triphenylphosphine) that selectively decompo ...
2008
,
The neodymium-deficient nickelate Nd1.95NiO4+ı, mixed conducting K2NiF4-type oxide, was evaluated as cathode for solid oxide fuel cells. The electrochemical properties were investigated on planar Ni–YSZ anode-supported SOFC based on co-tape casted and co-f ...
2008
,
Correctly controlling a fuel cell system and maintaining correct operating conditions, particularly under dynamic load variations, is difficult without advanced, multivariable control systems. In order to design and implement such controllers, an appropria ...
