Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
[1] A model is developed to quantify the wind sheltering of a lake by a tree canopy or a bluff. The experiment-based model predicts the wind-sheltering coefficient a priori, without calibration, and is useful for one-dimensional (1-D) lake hydrodynamic and ...
An experimental and theoretical investigation of the shear strength of reinforced concrete slabs without shear reinforcement is under way at the Ecole Polytechnique Fédérale de Lausanne. The first part of the program consists of 6 tests on two large scale ...
6th International PhD Symposium in Civil Engineering, IBK Publikation SP-0152006
Gecko-inspired microfibre arrays with 42 million polypropylene fibres cm−2 (each fibre with elastic modulus 1 GPa, length 20 μm and diameter 0.6 μm) were fabricated and tested under pure shear loading conditions, after removing a preload of less than 0.1 N ...
A simple new model is proposed to predict the distribution of wind velocity and surface shear stress downwind of a rough-to-smooth surface transition. The wind velocity is estimated as a weighted average between two limiting logarithmic profiles: the first ...
A wind-tunnel experiment was performed to test surface boundary condition formulations for large-eddy simulation downwind of a rough-to-smooth surface transition in a turbulent boundary layer for (Re-tau approximate to 1.5 x 10(4)). Single and x-wire anemo ...
Experimental results are presented of the mean flow and turbulence characteristics in the near field of a plane wall jet issuing from a nozzle onto flat and concave walls consisting of fixed sand beds. This is a flow configuration of interest for sediment ...
Analytical solutions to problems of solids mechanics are useful to test the accuracy and the precision of the numerical approaches. Problems such as shear locking or boundary layer can be better understood with the help of analytical solutions. However, it ...
We present a model that combines interface debonding and frictional contact. The onset of fracture is explicitly modeled using the well-known cohesive approach. Whereas the debonding process is controlled by a new extrinsic traction separation law, which a ...
Experimental results gained from quasi-static cyclic tests on 34 slender structural reinforced concrete walls available in the literature are used to examine the shear deformations for displacement demands in the inelastic range. Based on these results the ...
The contributions assembled in the present volume proceed from the lectures of the 2009 ALERT Geomaterials School devoted to the Failure in the multiphase geomaterials. The multiphase behaviour of geomaterials used to be mainly considered from the point of ...
