Air sensitivity is a term used, particularly in chemistry, to denote the reactivity of chemical compounds with some constituent of air. Most often, reactions occur with atmospheric oxygen (O2) or water vapor (H2O), although reactions with the other constituents of air such as carbon monoxide (CO), carbon dioxide (CO2), and nitrogen (N2) are also possible.
A variety of air-free techniques have been developed to handle air-sensitive compounds. Two main types of equipment are gloveboxes and Schlenk lines. Glove boxes are sealed cabinets filled with an inert gas such as argon or nitrogen. Normal laboratory equipment can be set up in the glovebox, and manipulated by the use of gloves that penetrate its walls. The atmosphere can be regulated to approximately atmospheric pressure and set to be pure nitrogen or other gas with which the chemicals will not react. Chemicals and equipment can be transferred in and out via an airlock.
A Schlenk line is a vacuum and inert-gas dual-manifold that allows glassware to be evacuated and refilled with inert gas specially developed to work with air sensitive compounds. It is connected with a cold trap to prevent vapors from contaminating a rotary vane pump. The technique is modified from the double-tipped needle technique. These methods allow working in totally controlled and isolated environment.
Air-sensitive compounds are substances that would react, explode or oxidise with air, such as organometallic compounds (chemical compounds containing at least one chemical bond between a metal and carbon atom, including alkaline earth, alkaline and transition metals). They may include metalloids like tin, boron and sometimes silicon encountered in chemistry, which are sensitive to oxygen and moisture. Alkali metals and other pyrophoric compounds which react violently with water can be handled safely using air free techniques.
Some semiconductors are air-sensitive.
Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.
Laboratoire de chimie avancée.L'admission au TP est conditionnée à la réussite de 2 des 3 cours suivants : CH-222 Coordination chemistry, CH-223 Organometallic chemistry, CH-233 Fonctions et réactio
Air-free techniques refer to a range of manipulations in the chemistry laboratory for the handling of compounds that are air-sensitive. These techniques prevent the compounds from reacting with components of air, usually water and oxygen; less commonly carbon dioxide and nitrogen. A common theme among these techniques is the use of a fine (100–10−3 Torr) or high (10−3–10−6 Torr) vacuum to remove air, and the use of an inert gas: preferably argon, but often nitrogen.
thumb|upright=1.5|Une rampe à vide La rampe à vide est un appareil inventé par Wilhelm Schlenk afin de manipuler et de synthétiser des échantillons sensibles à l'air. Cet appareil comprend une double tubulure - une pour le vide et une pour le gaz inerte. Le vide est créé par une pompe mécanique. Un piège à froid contenant par exemple de l'azote liquide est placé entre cette pompe et la partie principale de la rampe à vide.
Air sensitivity is a term used, particularly in chemistry, to denote the reactivity of chemical compounds with some constituent of air. Most often, reactions occur with atmospheric oxygen (O2) or water vapor (H2O), although reactions with the other constituents of air such as carbon monoxide (CO), carbon dioxide (CO2), and nitrogen (N2) are also possible. A variety of air-free techniques have been developed to handle air-sensitive compounds. Two main types of equipment are gloveboxes and Schlenk lines.