Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Water-in-salt electrolytes have enabled the development of novel high-voltage aqueous lithium-ion batteries. This study explores the reasons why analogous sodium electrolytes have struggled to reach the same level of electrochemical stability. Solution str ...
We report the extraction of silicon via a carbothermal reduction process using a CO2 laser beam as a heat source. The surface of a mixture of silica and carbon black powder became brown after laser beam irradiation for a few tens of seconds, and clear peak ...
In this work, we performed electrochemical investigations of Fe-binding ligands in water samples collected in autumn 2011 along the Australian GEOTRACES southwestern Pacific section (GP13, between 153 degrees E and 170 degrees W longitude along the 30 degr ...
Metal ion capture is of environmental and economic significance. The industrial revolutions have discharged increasing amounts of heavy and precious metals into complex water sources. The key is that these types of metal ions tend to be at trace amounts in ...
Pre-oxidation is often used before disinfection with chlorine to decrease the reactivity of the water matrix and mitigate the formation of regulated disinfection byproducts (DBPs). This study provides insights on the impact of oxidative pre-treatment with ...
The mechanism of aggregation-induced emission, which overcomes the common aggregation-caused quenching problem in organic optoelectronics, is revealed by monitoring the real time structural evolution and dynamics of electronic excited state with frequency ...
Ozone was measured with a 2B Technology ozone monitor (model 205). The concentration is reported as a mixing ratio in parts per billion [ppb], at 60 seconds average. Ozone is a trace gas that can be formed directly in the troposphere (the most important fo ...
Pure Mg has low ductility due to a transition of < c+a > pyramidal dislocations to a sessile basal-oriented structure. Dilute alloying generally improves ductility. Enhancement of pyramidal cross-slip from the lower-energy pyramidal II plane to the higher- ...
Uranium (U) contamination of ground and surface waters poses an acute hazard on the ecosystem and human health. Since the discovery of microbial U(VI) reduction, U bioremediation has been explored as a promising and cost-effective method compared to tradit ...
Pre-oxidation is commonly used to mitigate the formation of byproducts during post-disinfection. A comparative study of the impact of four pre-oxidants, ozone (O-3), chlorine dioxide (ClO2), permanganate (Mn(vii)) and ferrate (Fe(vi)), on the formation of ...
