Concept

Bulova

Publications associées (13)

Hydraulically Amplified Electrostatic Taxels (HAXELs) for Full Body Haptics

Herbert Shea, Edouard Franck Vincent Gustave Leroy

The ability to mechanically stimulate touch receptors over the entire body is a key feature for fully immersive and highly realistic virtual reality experience. Haptic stickers, flexible arrays of HAXELs (hydraulically amplified TAXels), that enable cutane ...

WILEY2023

Flexure Pivot Oscillators for Mechanical Watches

Etienne Frédéric Gabriel Thalmann

It appears that the concerted efforts of the watchmaking industry are leading towards a limit in mechanical watch accuracy. The general consensus in horology is that the time base's quality factor, a dimensionless number that characterizes the oscillator d ...

EPFL2020

Scanning near-field optical microscopy with new probes and feedback modes

Anton Smirnov

Scanning Near-field Optical Microscopy (SNOM) technique enables to overcome Abbe diffraction limit of far-field optics as well as to obtain simultaneously optical and topographical images. While the optical resolution of the method is limited by the apertu ...

EPFL2019

Long-life plastic optical fiber probes for scanning near-field optical microscope

Giovanni Dietler, Anton Smirnov, Ekaterina Rostova

Nowadays, sharpened glass fiber - made probes attached to a quartz tuning fork (TF) and exploiting the shear force - based feedback are by far the most popular in the field of SNOM. These probes are expensive, very fragile and their fabrication is difficul ...

SPIE-INT SOC OPTICAL ENGINEERING2018

Recent improvements on micro-thermocouple based SThM

Danick Briand

The scanning thermal microscope (SThM) has become a versatile tool for local surface temperature mapping or measuring thermal properties of solid materials. In this article, we present recent improvements in a SThM system, based on a micro-wire thermocoupl ...

Iop Publishing Ltd2017

Ultrasonic driving method

Jacques Jacot

A method for driving a first component (11) into a second component (12) by superimposing a mechanical wave of ultrasonic frequency (18) onto the movement (17) of at least one of the components (11, 12). The method comprises a step of adjusting the paramet ...

2016

Single Active Nanoelectromechanical Tuning Fork Front-End Radio-Frequency Receiver

Mihai Adrian Ionescu, Alexandru Rusu, Sebastian Thimotee Bartsch

Nanoelectromechanical systems (NEMS) offer the potential to revolutionize fundamental methods employed for signal processing in today's telecommunication systems,1-4 owing to their spectral purity and the prospect of integration with existing technology. I ...

Institute of Physics2012

Development of a scanning near-field microscope and investigations of solid C60 luminescence

Jinquan Liu

This thesis presents the development of a scattering scanning near-field microscope (s-SNOM) and investigations on the photoluminescence study of solid C60. The first part concerns setting up of such a scattering SNOM where a tuning fork with an attached A ...

EPFL2007

Local Oxidation of Titanium Using Dynamic-Mode Tuning-Fork Probe with Microfabricated Silicon Cantilever

Nico de Rooij, Terunobu Akiyama, Kaspar Suter

We present a unique probe that is based on a quartz tuning fork and a microfabricated cantilever. The probe is self-actuating and self-sensing. The cantilever can be tailored to the needs of specific applications, in this case to feature an electrically co ...

2006

Scanning Probe with Tuning Fork Sensor, Microfabricated Silicon Cantilever and Conductive Tip for Microscopy at Cryogenic Temperature

Nico de Rooij, Terunobu Akiyama, Kaspar Suter

A quartz tuning-fork (TF)-based scanning probe is presented for local electrical transport measurements on quantum devices below the liquid 4He temperature. The TF is utilized to drive and sense the mechanical oscillation of an attached, microfabricated ca ...

2006

Graph Chatbot

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.

Connectez-vous pour utiliser Chat avec Graph Search