Concept

Effective porosity

Publications associées (88)

Microstructural developments of limestone calcined clay cement (LC3) pastes after long-term (3 years) hydration

Karen Scrivener, Franco Alberto Zunino Sommariva

LC3 is one of the most promising alternatives for a high-performance blended cement with a significantly lower clinker content and with potential for worldwide adoption. For this reason, understanding its long-term performance is relevant to ensure service ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Systematic design of millisecond gasification reactor for the incorporation of gas-sieving nanopores in single-layer graphene

Kumar Varoon Agrawal, Kuang-Jung Hsu, Luis Francisco Villalobos Vazquez de la Parra, Shiqi Huang, Shaoxian Li

Etching an ensemble of vacancy defects (nanopores) in single-layer graphene (SLG) to obtain a high density of nanopores with an effective size that enables high-performance gas sieving is challenging. This is because nanopore nucleation and expansion are u ...

2021

Understanding of the factors slowing down metakaolin reaction in limestone calcined clay cement (LC3) at late ages

Karen Scrivener, Paul Bowen, Yosra Briki, Mohsen Ben Haha, François Henri Avet

Factors which could explain the slowing down of the metakaolin reaction in LC3 blends are investigated. Portlandite availability and the presence of aluminium ions in the pore solution are shown not to be limiting factors. Hydrates can only precipitate in ...

PERGAMON-ELSEVIER SCIENCE LTD2021

Mapping Spatial Distribution of Pores in an Additively Manufactured Gold Alloy Using Neutron Microtomography

Roland Logé, Jamasp Jhabvala, Markus Strobl, Hossein Ghasemi Tabasi, Michaël Meyer

A crucial criterion for the quality of the additively manufactured parts is the porosity content for achieving an acceptable final relative density. In addition, for jewelry applications, visible pores are unacceptable at or in the vicinity of the surface. ...

2021

Alite-ye'elimite clinker: Hydration kinetics, products and microstructure

Karen Scrivener, Ruben Anton Snellings, Xuerun Li

This paper presents the hydration kinetics, products and microstructure of an alite-ye'elimite clinker containing 4 wt% of ye'elimite to boost the early strength development. Isothermal calorimetry, X-ray diffraction, backscattered scanning electron micros ...

ELSEVIER SCI LTD2021

Water-induced strength reduction is one of the most critical causes of rock engineering disasters. Understanding the influence of water on the fracture toughness of rocks is necessary for rock fracture mechanics and rock engineering applications such as mi ...

2020

The Influence of some calcined clays from Nigeria as clinker substitute in cementitious systems

Karen Scrivener, François Henri Avet, Akindehinde Ayotunde Akindahunsi

This paper examines the possibility of the use of some clays calcined from Nigeria as partial substitutes for clinker in the production of Limestone Calcined Clay Cement (LC3). The clays were calcined in the oven at a temperature of 800 degrees C and for o ...

ELSEVIER2020

Porous granules by freeze granulation of Pickering emulsions stabilized with halloysite particles

Paul Bowen

Pickering emulsions stabilized with a natural silicate mineral, halloysite, were dried by freeze granulation in order to prepare porous granules. Different formulations were studied, by varying the pH of the suspension, the ionic strength and with the addi ...

ELSEVIER2020

Young's modulus and creep of calcium-silicate-hydrate compacts measured by microindentation

Karen Scrivener, Zhangli Hu, Pietro Lura

In this paper, compacts of synthetic calcium silicate hydrate (C-S-H) with 0.8-1.5 calcium-to-silicon ratio (Ca/Si) and 30-80% porosity were prepared by one-direction cold pressing. The Young's modulus and the creep of C-S-H compacts were measured by micro ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Pore space properties in carbonate fault rocks of peninsular Italy

Marie Estelle Solange Violay

The fault cores of extensional faults in Mesozoic limestones and dolostones are examined by mean of combined microstructural, ultrasonic and petrophysical analyses. Grain-supported fault rocks commonly localize in the outer fault cores, whereas matrix-supp ...

2019

Graph Chatbot

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.

Connectez-vous pour utiliser Chat avec Graph Search