Concept
Méthodes de refroidissement pour ordinateur
Personnes associées (110)
John Richard Thome
John R. Thome is Professor of Heat and Mass Transfer at the Swiss Federal Institute of Technology in Lausanne (EPFL), Switzerland since 1998, where his primary interests of research are two-phase flow and heat transfer, covering both macro-scale and micro-scale heat transfer and enhanced heat transfer. He directs the Laboratory of Heat and Mass Transfer (LTCM) at the EPFL with a research staff of about 18-20 and is also Director of the Doctoral School in Energy. He received his Ph.D. at Oxford University, England in 1978. He is the author of four books: Enhanced Boiling Heat Transfer (1990), Convective Boiling and Condensation, 3rd Edition (1994), Wolverine Engineering Databook III (2004) and Nucleate Boiling on Micro-Structured Surfaces (2008). He received the ASME Heat Transfer Division's Best Paper Award in 1998 for a 3-part paper on two-phase flow and flow boiling heat transfer published in the Journal of Heat Transfer. He has received the J&E Hall Gold Medal from the U.K. Institute of Refrigeration in February, 2008 for his extensive research contributions on refrigeration heat transfer and more recently the 2010 ASME Heat Transfer Memorial Award. He has published widely on the fundamental aspects of microscale and macroscale two-phase flow and heat transfer and on enhanced boiling and condensation heat transfer.
David Atienza Alonso
David Atienza Alonso is an associate professor of EE and director of the Embedded Systems Laboratory (ESL) at EPFL, Switzerland. He received his MSc and PhD degrees in computer science and engineering from UCM, Spain, and IMEC, Belgium, in 2001 and 2005, respectively. His research interests include system-level design methodologies for multi-processor system-on-chip (MPSoC) servers and edge AI architectures. Dr. Atienza has co-authored more than 350 papers, one book, and 12 patents in these previous areas. He has also received several recognitions and award, among them, the ICCAD 10-Year Retrospective Most Influential Paper Award in 2020, Design Automation Conference (DAC) Under-40 Innovators Award in 2018, the IEEE TCCPS Mid-Career Award in 2018, an ERC Consolidator Grant in 2016, the IEEE CEDA Early Career Award in 2013, the ACM SIGDA Outstanding New Faculty Award in 2012, and a Faculty Award from Sun Labs at Oracle in 2011. He has also earned two best paper awards at the VLSI-SoC 2009 and CST-HPCS 2012 conference, and five best paper award nominations at the DAC 2013, DATE 2013, WEHA-HPCS 2010, ICCAD 2006, and DAC 2004 conferences. He serves or has served as associate editor of IEEE Trans. on Computers (TC), IEEE Design & Test of Computers (D&T), IEEE Trans. on CAD (T-CAD), IEEE Transactions on Sustainable Computing (T-SUSC), and Elsevier Integration. He was the Technical Program Chair of DATE 2015 and General Chair of DATE 2017. He served as President of IEEE CEDA in the period 2018-2019 and was GOLD member of the Board of Governors of IEEE CASS from 2010 to 2012. He is a Distinguished Member of ACM and an IEEE Fellow.
François Maréchal
Look at the
researcher id
Daniel Favrat
Daniel Favrat a obtenu à l'EPFL son diplôme d'ingénieur mécanicien en 1972 et le titre de docteur ès sciences techniques en 1976.
Il passe ensuite 12 ans dans des centres de recherche industriels au Canada et en Suisse.Depuis 1988, D. Favrat est professeur et directeur du Laboratoire d'énergétique industrielle à l'EPFL. Il est aussi successivement directeur de l'Institut des Sciences de l'énergie et, dès janvier 2007, de l'Institut de Génie Mécanique. Ses recherches portent sur les analyses systémiques prenant en compte l'énergétique, l'environnement et l'économie (optimisation environomique), et les systèmes avancés pour une utilisation plus rationnelle de l'énergie (pompes à chaleur, moteurs, piles à combustible,turbomachines etc.)
Il est membre de l'Académie Suisse des Sciences Techniques et vice-président du comité énergie de la Fédération Mondiale des Organisations d'Ingénieurs. Il est éditeur associé du journal "Energy" et l'auteur de deux livres sur la thermodynamique et l'énergétique publiés aux Presses Polytechniques Universitaires Romandes.
Thomas Keller
EDUCATION
1992 Dr. sc. techn. (PhD)
Swiss Federal Institute of Technology, Zurich (ETH)
1983 Dipl. Bauing. ETH (MS civil engineering)
Swiss Federal Institute of Technology, Zurich (ETH)
EMPLOYMENT
2007-present, Full Professor of Structural Engineering (100%)
Swiss Federal Institute of Technology, Lausanne (EPFL)
Civil Engineering Institute
1998-2007, Associate Professor of Structural Engineering (80/100%)
Swiss Federal Institute of Technology, Lausanne (EPFL)
Structural Engineering Institute
Foundation of CCLab in 2000
1996-1998, Assistant Professor of Structural Engineering (50%)
Swiss Federal Institute of Technology, Zurich (ETH)
Department of Architecture
1992-2004, Senior Project Engineer and Joint Owner
Engineering offices in Zug and Zurich
1990-1992, Research Scientist
Swiss Federal Institute of Technology, Zurich (ETH)
Structural Engineering Institute
1986-1990, Project Engineer
Architecture and engineering office Calatrava, Zurich
1983-1986, Teaching and Research Assistant
Swiss Federal Institute of Technology, Zurich (ETH)
Structural Engineering Institute
Jean-Marie Drezet
1992-1996: travail de thèse au Laboratoire de Métallurgie Physique sous la direction du Prof. Michel Rappaz, http://library.epfl.ch/theses/?display=detail&nr=1509 1997-2000: projet EMPACT (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: projet VIRCAST (European Virtual Casting) 2005-2006: projet Etude du sciage des barres à laminer (Alcan Fonds) 2005-2006: projet WelAIR (Welding of Airframes, EADS) 2005-2008: soudage faisceau d'électrons des Cu-Cr-Zr (CEA, France) 2006-2008: soudage laser des Al-Li (EADS, France) 2008-2011: co-direction avec le Prof. A. Nussbaumer de la thèse de C. Acevedo sur l'influence des contraintes residuelles sur le desgin en fatigue des joints tubulaires soudés, http://library.epfl.ch/theses/?nr=5056 2007-2011: co-direction avec le Prof. J.-F. Molinari de la thèse de K. Shahim sur la dilatation ventriculaire dans l'hydrocéphalie à pression normale (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-direction avec le Prof. M. Rappaz de la thèse de M. Sistaninia sur la simulation de la fissuration par modèles granulaires (Projet CCMX-MERU) 2010-2014: direction avec le Prof. M. Rappaz de la thèse de N. Chobaut sur la simulation des contraintes lors de la trempe de pièces épaisses en alliage d'aluminium à durcissement structural (Projet CCMX-MERU) 2011-2015: direction avec le Prof. H. Van Swygenhoven-Moens de la thèse de P. Schloth sur l'étude de la précipitation lors de la trempe de pièces épaisses en alliage d'aluminium à durcissement structural (Projet CCMX-MERU)