Publications associées à Joint torique

Reinforced Supramolecular Networks of End Functionalized Polymers for Tailored Thermomechanical Property Profiles

Thermoset rubbers give rise to elastomers with tunable stiffness and high resilience but are not recyclable. Thermoplastic elastomers can address this problem but their broad applicability is impeded by either limited operating temperatures or inferior ela ...

EPFL2023

Transient Elastomers with High Dielectric Permittivity for Actuators, Sensors, and Beyond

Holger Frauenrath, Yauhen Sheima

Dielectric elastomers (DEs) are key materials in actuators, sensors, energy harvesters, and stretchable electronics. These devices find applications in important emerging fields such as personalized medicine, renewable energy, and soft robotics. However, e ...

AMER CHEMICAL SOC2022

Automated test setup to quantify the lifetime of dielectric elastomer actuators under a wide range of operating conditions

Herbert Shea, Fabio Beco Albuquerque, Djen Timo Kühnel, Valentin Colin Py

We present an automated test setup for the systematic performance and lifetime evaluation of dielectric elastomer actuators (DEAs). This setup, called the MAPLE setup, performs accelerated aging tests and allows quantifying how material choice, fabrication ...

IOP PUBLISHING LTD2021

Macrocyclization of omega-Isocyanoaldehydes and Towards the Total Synthesis of Jamaicensamide A

Teerawat Songsichan

In the first chapter of this thesis, the macrocyclization of a new type of bifunctional substrates, omega-isocyanoaldehyde derivatives, is described. Ten different omega-isocyanoaldehydes in terms of different ring sizes and functional groups were prepared ...

EPFL2021

Increased electromechanical sensitivity of polysiloxane elastomers by chemical modification with thioacetic groups

Yee Song Ko

Chemically cross-linked polydimethylsiloxane (PDMS) elastomers have gained importance as a dielectric in elastic capacitor actuators, which elongate when electrically charged. Common PDMS elastomers have a dielectric permittivity of only about 3 and thus e ...

2020

Data-Driven Model for the Dynamic Characteristics of O-Rings for Gas Bearing Supported Rotors

Jürg Alexander Schiffmann, Philipp Kaspar Bättig

The measurement results of various nitrile butadiene rubber (NBR) O-Ring sizes are pre-sented, and reduced-order models are developed in order to predict the stiffness and damping coefficient as a function of O-Ring geometry, Shore hardness, squeeze, and e ...

2019

Flexible support and enhanced groove geometries for gas lubricated bearings

Philipp Kaspar Bättig

Gas lubricated Herringbone-Grooved Journal Bearings (HGJB) are a promising solution to support high-speed rotors in oil-free turbo-machinery due to their compactness, relatively low losses, no need for lubrication and low wear. Gas lubricated bearings, how ...

EPFL2019

Functional composites with damage control and repair

Amaël Maximilien Cohades

Fibre Reinforced Polymer (FRP) composite structures are subjected during service to low energy impacts or unexpected loads, leading to damage. Microcracks are generally first formed in the matrix and can reach up to several hundred microns in thickness. In ...

EPFL2018

Inkjet 3D printing of UV and thermal cure silicone elastomers for dielectric elastomer actuators

Herbert Shea, Samuel Rosset, Samuel Schlatter, David James McCoul

Dielectric elastomer actuators (DEAs) are an attractive form of electromechanical transducer, possessing high energy densities, an efficient design, mechanical compliance, high speed, and noiseless operation. They have been incorporated into a wide variety ...

Institute of Physics2017

High Permittivity Silicones for Dielectric Elastomer Actuators

Simon Johannes Dünki

Many technical advances of modern society sprout from the creation of specially customized polymer materials exhibiting unique combinations of properties uncharted so far. Amid this plurality of highly versatile materials, the class of electroactive polyme ...

EPFL2017