Extrusion

Applied sciences
Génie chimique
Science des matériaux
Metalworking

Publications associées (27)

À propos
Confidentialité
Mentions légales

Graph Chatbot

Pore Size Manipulation in 3D Printed Cryogels Enables Selective Cell Seeding

Philippe Renaud, Ludovic Serex, Arnaud Bertsch, Thomas Michael Braschler, Ariane Rochat, Amélie Barbara Hildegarde Béduer, Aleksandra Filippova

Cryogels are macroporous materials that display remarkable properties, such as high pore interconnection, large surface to volume ratio, and high mechanical stability, making them good candidates for 3D cell culture. However, shaping cryogels remains chall ...

Wiley2018

Microfluidics: A New Layer of Control for Extrusion-Based 3D Printing

Philippe Renaud, Ludovic Serex, Arnaud Bertsch

Advances in 3D printing have enabled the use of this technology in a growing number of fields, and have started to spark the interest of biologists. Having the particularity of being cell friendly and allowing multimaterial deposition, extrusion-based 3D p ...

2018

Competition between intragranular and intergranular deformation mechanisms in ODS ferritic steels during hot deformation at high strain rate

Roland Logé

Oxide Dispersed Strengthened (ODS) ferritic stainless steels present well-known fine grains microstructures where dislocation movement is hindered by a dense precipitation of nano-oxides particles. Previous research, on the thermomechanical behavior at hig ...

Springer Verlag2017

Note on the Rate and Energy Efficiency Limits for Additive Manufacturing

Michael Hausmann, Sheng Jiang

We review the process rates and energy intensities of various additive processing technologies and focus on recent progress in improving these metrics for laser powder bed fusion processing of metals, and filament and pellet extrusion processing of polymer ...

Massachusetts Institute of Technology Press2017

Microstructural characterizations of 14Cr ODS ferritic steels subjected to hot torsion

Roland Logé

Oxide dispersion strengthened (ODS) steels are very promising materials for nuclear applications. In thispaper, the hot working behavior of ODS ferritic steels, consolidated by hot extrusion, is studied through torsion tests. Three ODS steels are produced ...

Elsevier2015

Microstructural influence on the scatter in the fatigue life of steel reinforcement bars

Eugen Brühwiler, Alain Nussbaumer, Marina Rocha Pinto Portela Nunes

Fatigue damage accumulation and failure of steel reinforcement bars (rebars) is a stochastic process. Scatter can be influenced by the sensitivity of the short crack growth to the microstructural features, especially near the fatigue limit. This work inves ...

Elsevier2015

Microstructure examination of Fe-14Cr ODS ferritic steels produced through different processing routes

Nadine Baluc, Zbigniew Oksiuta

Various thermo-mechanical treatments were applied to refine and homogenise grain size and improve mechanical properties of hot-isostatically pressed (HIP) 14%Cr ODS ferritic steel. The grain size was reduced, improving mechanical properties, tensile streng ...

Elsevier Science Bv2014

Morphological investigation of polylactide/microfibrillated cellulose composites

Pierre-Etienne Bourban, John Christopher Plummer, Carole Boissard

Optical microscopy and transmission electron microscopy have been used to investigate the morphology of polylactide (PLA)/microfibrillated cellulose (MFC) composites prepared by: compression molding of wet-comingled MFC and PLA latex or powder, twin-screw ...

Springer Berlin Heidelberg2013

Prediction of Hot Tear Formation in Vertical DC Casting of Aluminum Billets Using a Granular Approach

Michel Rappaz, Jean-Marie Drezet, André Phillion, Meisam Sistaninia

A coupled hydromechanical granular model aimed at predicting hot tear formation and stress-strain behavior in metallic alloys during solidification is applied to the semicontinuous direct chill casting of aluminum alloy round billets. This granular model c ...

Springer2013

Residual Stresses in DC cast Aluminum Billet: Neutron Diffraction Measurements and Thermomechanical Modeling

Jean-Marie Drezet

Thermally-induced residual stresses, generated during the industrial Direct Chill casting process of aluminum alloys, can cause both significant safety concerns as well as the formation of defects during down-stream processing. Although these thermally ind ...

Amer Inst Physics, 2 Huntington Quadrangle, Ste 1No1, D, Melville, Ny 11747-4501 Usa2011

Page 2 sur 3

Microstructural characterizations of 14Cr ODS ferritic steels subjected to hot torsion

Roland Logé

Elsevier2015

Competition between intragranular and intergranular deformation mechanisms in ODS ferritic steels during hot deformation at high strain rate

Roland Logé

Springer Verlag2017