Kawasaki Z1300

The Kawasaki Z1300 is a standard motorcycle unusual for its large-displacement 1,300 cc straight-six engine made by Kawasaki from 1979 to 1989. Kawasaki Z1300's length is 89.1 inches, and its width is 30.9 inches, its height: 49.8 inches, the wheelbase is 62.2 inches, seat height is 31.2 inches, ground clearance is 5.5 inches, weight is 314 kg. The Z1300 had six cylinders, water cooling, and shaft drive. The undersquare stroke of and bore of kept the engine width acceptable, but the high piston speed limited the maximum rpm figure. During its ten-year production run, fuelling was switched from carburetors to electronic fuel injection and suspension was upgraded to air systems front and rear. Fuel injection system was adopted primarily to improve fuel consumption, but as a bonus were increased power and torque. Cycle World tested the 1979 KZ1300's time at 11.93 seconds at and 0 to 60 mph time at 4.01 seconds. The Kawasaki Z1300 was manufactured in several versions, namely: Z1300, KZ1300, ZG1300 and ZN1300. It is the biggest model of the still-ongoing Z series that was started in 1972 with the Z1 (900). In the U.S., the model was equipped with a windshield, suitcase, and a redesigned frame. This new model was called "Voyager". In Europe, the traditional model was still available. The last 200 models (built in America as all Z1300 models were), built in 1989, have been called "Legendary Six", and were equipped with a special logo on the fuel tank to show that to the public. After a ten-year production run, Kawasaki's only liquid-cooled six-cylinder engine motorcycle was discontinued in 1989 after 20,000 KZ1300/Z1300 models and 4,500 Voyager models had been produced. Kawasaki Motorcycle's history began in the 1966. Kawasaki Motorcycle is a motorcycle produced by Kawasaki Heavy Industries' Motorcycle and Engine Division. Its first headquarters was located in an old meat warehouse, and started humble in the United States. Their initial focus was to realize their dreams and therefore did not focus on any fancy things to minimize management costs and use their finances for bicycle production.