Programmed input–outputProgrammed input–output (also programmable input/output, programmed input/output, programmed I/O, PIO) is a method of data transmission, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a Parallel ATA storage device. Each data item transfer is initiated by an instruction in the program, involving the CPU for every transaction. In contrast, in direct memory access (DMA) operations, the CPU is uninvolved in the data transfer.
Interruption (informatique)En informatique, une interruption est une suspension temporaire de l'exécution d'un programme informatique par le microprocesseur afin d'exécuter un programme prioritaire (appelé service d'interruption). avancement d'une horloge, signalisation de la complétion d'un transfert de données, positionnement d'une tête de lecture/écriture Cependant, on l'utilise aussi pour désigner des exceptions, c'est-à-dire des arrêts provoqués par une condition exceptionnelle dans le programme (instruction erronée, accès à une zone mémoire inexistante, calcul arithmétique incorrect, appel volontaire au système d'exploitation).
Interrupt handlerIn computer systems programming, an interrupt handler, also known as an interrupt service routine or ISR, is a special block of code associated with a specific interrupt condition. Interrupt handlers are initiated by hardware interrupts, software interrupt instructions, or software exceptions, and are used for implementing device drivers or transitions between protected modes of operation, such as system calls. The traditional form of interrupt handler is the hardware interrupt handler.
Mode réelLe mode réel est le mode de fonctionnement par défaut des processeurs compatibles Intel x86. Il est aujourd'hui désuet car on lui préfère le mode protégé qui est plus robuste face aux erreurs matérielles et de programmation. Le mode réel est caractérisé par un adressage de l'espace mémoire sur 20 bits au total, ce qui permet d'accéder à seulement un Mio. L'accès se fait par un couple de registres segment:offset ayant chacun une taille de , Ce mode permet un accès direct à toute la mémoire, aux différentes interruptions entrée/sorties, dont celles du BIOS.
Programmable interrupt controllerIn computing, a programmable interrupt controller (PIC) is an integrated circuit that helps a microprocessor (or CPU) handle interrupt requests (IRQ) coming from multiple different sources (like external I/O devices) which may occur simultaneously. It helps prioritize IRQs so that the CPU switches execution to the most appropriate interrupt handler (ISR) after the PIC assesses the IRQ's relative priorities. Common modes of interrupt priority include hard priorities, rotating priorities, and cascading priorities.