Interruption (informatique)En informatique, une interruption est une suspension temporaire de l'exécution d'un programme informatique par le microprocesseur afin d'exécuter un programme prioritaire (appelé service d'interruption). avancement d'une horloge, signalisation de la complétion d'un transfert de données, positionnement d'une tête de lecture/écriture Cependant, on l'utilise aussi pour désigner des exceptions, c'est-à-dire des arrêts provoqués par une condition exceptionnelle dans le programme (instruction erronée, accès à une zone mémoire inexistante, calcul arithmétique incorrect, appel volontaire au système d'exploitation).
Interrupt handlerIn computer systems programming, an interrupt handler, also known as an interrupt service routine or ISR, is a special block of code associated with a specific interrupt condition. Interrupt handlers are initiated by hardware interrupts, software interrupt instructions, or software exceptions, and are used for implementing device drivers or transitions between protected modes of operation, such as system calls. The traditional form of interrupt handler is the hardware interrupt handler.
Non-maskable interruptIn computing, a non-maskable interrupt (NMI) is a hardware interrupt that standard interrupt-masking techniques in the system cannot ignore. It typically occurs to signal attention for non-recoverable hardware errors. Some NMIs may be masked, but only by using proprietary methods specific to the particular NMI. An NMI is often used when response time is critical or when an interrupt should never be disabled during normal system operation.
Programmable interrupt controllerIn computing, a programmable interrupt controller (PIC) is an integrated circuit that helps a microprocessor (or CPU) handle interrupt requests (IRQ) coming from multiple different sources (like external I/O devices) which may occur simultaneously. It helps prioritize IRQs so that the CPU switches execution to the most appropriate interrupt handler (ISR) after the PIC assesses the IRQ's relative priorities. Common modes of interrupt priority include hard priorities, rotating priorities, and cascading priorities.
Inter-processor interruptIn computing, an inter-processor interrupt (IPI), also known as a shoulder tap, is a special type of interrupt by which one processor may interrupt another processor in a multiprocessor system if the interrupting processor requires action from the other processor. Actions that might be requested include: flushes of memory management unit caches, such as translation lookaside buffers, on other processors when memory mappings are changed by one processor; stopping when the system is being shut down by one processor.
