Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
In blends of unsaturated polyester (UP), poly (vinyl acetate) (PVAc), and styrene, a reaction-induced phase separation occurs upon curing that is due to the crosslinking between styrene and the UP molecules. The evolution of the morphology was observed by ...
The different steps associated with the curing of a PVAc/polyester blend are identified and correlated to the mechanism of shrinkage control in the presence of a low-profile additive (LPA). Poly(vinyl acetate) (PVAc) is used as a LPA and is shown to induce ...
Different types of inorganic oxide films composed of a chemical composition gradient single layer were designed, fabricated and characterized. Compositionally graded thin films were created by power-controlled co-sputtering of alumina (Al2O3) and silica (S ...
Epoxy-functionalised hyperbranched polymers (HBP) were combined with aminosilanes to form coatings and their effect on the practical adhesion between galvanised steel and polyethylene was investigated. It was shown that HBPs were initially soluble in silan ...
In blends of unsaturated polyester (UP), poly (vinyl acetate) (PVAc), and styrene, a reaction-induced phase separation occurs upon curing that is due to the crosslinking between styrene and the UP molecules. The evolution of the morphology was observed by ...
2006
,
The evolution of morphology of reactive thermoplastic/unsaturated polyester blends at the surface of glass fibers is investigated during curing. The study focuses on two different types of thermoplastics, incompatible and compatible respectively with the p ...
2005
,
A study of the microstructure developing at the surface of glass fibers in a poly(vinyl acetate) (PVAc)/polyester blend is presented. Three different experimental methods are used: a technique based on the Wilhelmy method to measure the wettability of the ...