Thomas Maeder

Cette personne n’est plus à l’EPFL

À propos
Confidentialité
Mentions légales

Graph Chatbot

Publications associées (96)

Transport properties of nonhomogeneous segregated composites

Peter Ryser, Claudio Grimaldi, Thomas Maeder, Gianluca Ambrosetti, Biagio Nigro

In conductor-insulator composites in which the conducting particles are dispersed in an insulating continuous matrix the electrical connectedness is established by interparticle quantum tunneling. A recent formulation of the transport problem in these kind ...

2011

Structuration of the low temperature co-fired ceramics (LTCC) using novel sacrificial graphite paste with PVA–propylene glycol–glycerol–water vehicle

Peter Ryser, Thomas Maeder, Caroline Jacq

A novel formulation for thick-film graphite sacrificial pastes is studied in this paper. It is composed of coarse graphite powder (grain size: 25 μm), dispersed in a vehicle consisting of polyvinyl alcohol (PVA) dissolved in a propylene glycol (PG)–glycero ...

Elsevier2011

Thick-film multi-DOF force / torque sensor for wrist rehabilitation

Thomas Maeder, Caroline Jacq, Roger Gassert, Olivier Lambercy, Barthélémy Lüthi

A complete six degree of freedom (6 DOF) force/torque sensor has been designed and fabricated, adapted to wrist rehabilitation applications, with the focus laid on simple, straightforward manufacturing processes. This paper details the mechanical design, 3 ...

Elsevier2010

The Magnetic Diagnostic Set for ITER

Jean-Marc Moret, Duccio Testa, René Chavan, Jonathan Bryan Lister, Matthieu Toussaint, Thomas Maeder, Gilbert Tonetti, Albert Perez, Francisco Sanchez, Yannick Sébastien Fournier

This paper presents the multiple set of requirements for the ITER magnetic diagnostic systems and the current status of the various R&D activities performed by the EU partners. ...

2010

Formulation of composite resistive pastes for fabrication of micro-heaters

Peter Ryser, Thomas Maeder, Nathalie Sophie Adeline Serra, Pierre Lemaire

We investigate in this work the formulation of composite resistive pastes based on epoxy resins and graphite for micro-heater manufacturing via thick-film technology. These resistive pastes are designed for screen-printing onto a printed circuit board (PCB ...

Elsevier2010

Solution of the tunneling-percolation problem in the nanocomposite regime

Peter Ryser, Claudio Grimaldi, Thomas Maeder, Gianluca Ambrosetti

We noted that the tunneling-percolation framework is quite well understood at the extreme cases of percolation-like and hopping-like behaviors but that the intermediate regime has not been previously discussed, in spite of its relevance to the intensively ...

2010

The Magnetic Diagnostic Set for ITER

Jean-Marc Moret, Duccio Testa, René Chavan, Jonathan Bryan Lister, Matthieu Toussaint, Gilbert Tonetti, Thomas Maeder, Albert Perez, Francisco Sanchez, Jérôme Guterl

2010

Sensors and packages based on LTCC and thick-film technology for severe conditions

Peter Ryser, Thomas Maeder, Caroline Jacq

Reliable operation in harsh environments such as high temperatures, high pressures, aggressive media and space, poses special requirements for sensors and packages, which usually cannot be met using polymer-based technologies. Ceramic technologies, especia ...

2009

Thick-film multi-DOF force / torque sensor for wrist rehabilitation

Thomas Maeder, Caroline Jacq, Roger Gassert, Olivier Lambercy, Barthélémy Lüthi

A complete six–degree-of-freedom (6-DOF) force / torque sensor has been designed and fabricated for wrist rehabilitation applications, with the focus laid on simple, straightforward manufacturing processes. This paper details the mechanical design, 3D-mode ...

Elsevier2009

Hermetic package for optical MEMS

Peter Ryser, Jacques Jacot, Thomas Maeder, Yannick Sébastien Fournier, Frank Seigneur

This article describes the design and fabrication of a hermetic LTCC package for an optical MEMS chip designed for space applications. The package must ensure electrical and optical connections, mechanical positioning, atmosphere control, and finally low t ...

2009

Page 6 sur 10

Structuration of the low temperature co-fired ceramics (LTCC) using novel sacrificial graphite paste with PVA–propylene glycol–glycerol–water vehicle

Peter Ryser, Thomas Maeder, Caroline Jacq

Elsevier2011

The Magnetic Diagnostic Set for ITER

Jean-Marc Moret, Duccio Testa, René Chavan, Jonathan Bryan Lister, Matthieu Toussaint, Thomas Maeder, Gilbert Tonetti, Albert Perez, Francisco Sanchez, Yannick Sébastien Fournier

This paper presents the multiple set of requirements for the ITER magnetic diagnostic systems and the current status of the various R&D activities performed by the EU partners. ...

2010