Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
This paper shows an implementation of a scroll booster compressor mounted at the suction line of a single-stage air-water heat pump. The compressor selected to be used as booster is a beltdriven scroll compressor initially dedicated to automotive refrigera ...
Providing heat pumps for the retrofit of fuel based boilers in residential heating, is a short or medium term challenge and a major opportunity for a substantial reduction of greenhouse gas emissions. While effective solutions for improved high temperature ...
2005
,
In order to extend the application range of air-water heat pumps to high temperature residential heating systems, new small hermetic compressors with remodeled injection ports for vapor injection have successfully been tested in laboratory. The injection f ...
The capacities of performance improvements of low and mid-size heat pumps are studied in this project. For the new buildings market, the components of the heat pump match already well the requirements for high performance and monovalent heating. Minor impr ...
1999
,
A new type of air-water heat pump has been developed with the aim to cover an extended application range in high temperature residential heating (for retrofitting existing oil or gas boilers in hydronic heating systems). The base heat output is about 10 kW ...
2002
, ,
The project High Temperature Heat Pump has been completed in 2 phases. First a new type of scroll compressor with adapted injection port for vapor injection, was tested with an air-water heat pump (fig 2.2, 2.3). This type of heat pump reaches the extreme ...
This thesis presents a system approach with the aim to develop improved concepts for small capacity, high temperature lift air-water heat pumps. These are intended to replace fuel fired heating systems in the residential sector, which leads to a major redu ...
The Laboratory of Industrial Energy systems has evaluated a series of high performance air-water heat pump concepts with the aim to retrofit existing fuel fired boilers for residential hydronic heating systems. The results are published within the framewor ...
The subject of this project is to develop a high performance air water heat pump which is able to be introducted in the retrofit market. The system requirements of this market are heating temperatures of 65°C, at ambient temperatures descending until -12°C ...
2001
,
This project is evaluating a heat pump cycle with midstage injection at scroll compressors. The injected refrigerant is evaporated partially by an internal heat exchanger (fig. 2.1). A glycol-water heat pump with 12 kW heat capacity at B-5/W50 was built an ...