François Avellan | EPFL Graph Search

Le professeur François Avellan, directeur du Laboratoire de machines hydrauliques de l'EPFL, est Ingénieur hydraulicien diplômé en 1977 de l'Ecole nationale supérieure d'hydraulique, Institut national polytechnique de Grenoble, France. En 1980, il obtient, son titre de docteur ingénieur de l'Université d'Aix-Marseille II, France. Engagé à l'EPFL en 1980 en tant qu'adjoint scientifique, il est depuis 1994 directeur du Laboratoire de machines hydrauliques de l'EPFL et il a été nommé en 2003 professeur ordinaire en machines hydrauliques.

Directeur de 37 thèses de doctorat de l'EPFL, il a été distingué par la Société hydrotechnique de France qui lui a décerné son "Grand Prix 2010 de l'hydrotechnique". Son activité de recherche est centrée sur l'hydrodynamique des turbomachines, pompes et pompes-turbines incluant en particulier les domaines de la cavitation, l'hydroacoustique, les interactions fluide-structure, la conception et l'évaluation des performances des machines hydrauliques et systèmes associés.

De 2002 à 2012, le Professeur Avellan a présidé la section machines hydrauliques et systèmes de l'Association internationale de recherche hydraulique, AIRH. Le Professeur François Avellan a dirigé avec succès plusieurs projets de recherche aussi bien suisses qu'internationaux en partenariat avec les principaux acteurs industriels et exploitants du secteur hydro-électrique, parmi ces projet-on peut citer notamment:

Coordination du projet de recherche FP7 n° 608532 "HYPERBOLE: HYdropower plants PERformance and flexiBle Operation towards Lean integration of new renewable Energies" (2013-2017);
Directeur adjoint du pole Suisse de compétence en recherche énergétique – approvisionnement électrique (SCCER-SoE) pour développer une recherche innovante et pérenne dans le domaine des géo-énergies et de l'hydro-électricité pour la phase I (2013-2016) et la Phase II (2017, 2010).
Projets de recherche EUREKA: N° 4150 et N° 3246, "HYDRODYNA, Harnessing the dynamic behavior of pump-turbines", (2003-2011), N° 1605, "FLINDT, Flow Investigation in Draft Tubes", (1997-2002). N° 2418, "SCAPIN, Stability of Operation of Francis turbines, prediction and modeling";
Projets de recherche de la Commission pour la technologie et l'innovation, CTI, avec GE Renewable Energy (anc. ALSTOM Hydro), Birr, ANDRITZ Hydro, Kriens, FMV, Sion, Groupe E, Granges-Paccot, Power Vision engineering, Ecublens et SULZER Pompes, Winterthur.
Domaine des EPF, Projet HYDRONET du Centre de Compétence énergie et mobilité, PSI Villingen.

Enfin, il est impliqué dans l'expertise scientifique et les essais contractuels indépendants des performances des turbines et pompes-turbines des centrales hydro-électriques les plus importantes du monde. En reconnaissance de son activité de responsable du groupe de travail du comité TC4 en charge de la nouvelle édition de la norme CEI 60193, la Commission internationale électrotechnique, CEI, l'a distingué par le "IEC 1906 Award".

CFD simulations of hydraulic short-circuits in junctions, application to the Grand’Maison power plant

François Avellan

In the framework of the XFLEX HYDRO H2020 European Project, the pumped-storage power plant of Grand'Maison (France), owned by Electricité De France, focuses on the implementation of the hydraulic short-circuit (HSC) operating mode. This mode increases the flexibility in pumping mode, which helps the integration of intermittent energies. Grand'Maison is divided into two power houses: the first features four Pelton turbine units and the second eight reversible pump-turbines units. A trifurcation splits the flow into three penstocks, each is then split into two branches that feed each power house. The HSC operating mode, which consists in operating the pumps and the Pelton turbines simultaneously, changes the flow paths in the junctions compared to the pump mode. The power plant was not designed to operate in HSC mode over a long duration, therefore an assessment of its feasibility is necessary. 151 computational fluid dynamic simulations are carried out for two bifurcations and one trifurcation. The numerical simulation results show that the local head losses in HSC mode represent less than 1% of the gross head. No flow instabilities are observed at the bifurcations contrary to the trifurcation. Additional analyses are required to better understand the flow in the trifurcation.

2022

An experimental study on the upper part-load elliptical vortex instability in a Francis turbine

Ali Amini, François Avellan, Arthur Tristan Favrel, Andres Müller, Elena Vagnoni

This paper presents preliminary results of an experimental study on the occurrence and development of the upper part-load instability in a reduced-scale Francis turbine. The study includes draft tube pressure measurements, high-speed flow visualization, and particle image velocimetry. Our results reveal that for an operating point within the range of the upper part-load instability (70 to 85 % of the nominal discharge), the vortex rope has a circular cross section in non-cavitating conditions, which is preserved even after the appearance of cavitation within the vortex core. It is only below a certain cavitation number that the vortex cross section turns into an ellipse, which is associated with an abrupt increase in the pressure fluctuations with a distinct peak in the frequency domain. A further decrease in the cavitation number results in a constant decrease in the activated frequency while the amplitude of these oscillations experience a rise followed by a quick drop. Phase-averaged velocity fields show that the occurrence and development of cavitation within the vortex rope result in a more diffused distribution of the angular momentum. The instantaneous velocity fields, on the other hand, reveal that the elliptical vortex has various states with either diffused or concentrated velocity distributions, which makes the use of the averaged velocity field for this point less relevant.

IOP PUBLISHING LTD2021

Application of particle-based numerical analysis to the practical design of Pelton turbine

Siamak Alimirzazadeh, François Avellan, Takashi Kumashiro

For the design optimization of the Pelton turbine, it is highly demanded to investigate the flow inside the turbine casing, which includes the water jet from the nozzles, the interaction between the jet and rotating runner, and the flow ejected from the bucket outlet, in various operating ranges. The behavior of the flow, however, is very complicated due to its unsteadiness and free surface. Further, the experimental observation in the model test is challenging because of the high time resolution requirement and the obstruction by the splashing water inside the turbine housing. In this regard, the numerical analysis is considered as a powerful method to approach the flow behavior in the Pelton turbine. Conventionally, the grid-based numerical analysis is applied to the calculation of the flow for its practical design. However, with the gird-based methods, a huge amount of fine elements is required to capture the unsteady behavior of the water free surface and the tiny splashing water particles. Increasing the number of elements directly results in higher computational costs, which makes it difficult to consider the splashing water in the process of practical design. From this point of view, the GPU-accelerated finite volume particle method is applied to the investigation of the flow in this research. It is firstly confirmed that the particle-based numerical result has a good agreement with the experimental result by the comparison of the turbine characteristics. Furthermore, several evaluations of the flow based on the analysis for the practical design are introduced in the paper.

IOP PUBLISHING LTD2021